Latest lead box Tenders | Government lead box Tenders

Corporations And Associations And Others

CTN :45563054

07 Jul, 2026 NA

Rupnagar - Punjab

Tender For corrigendum : e-tender for civil contract jobs - civil contract job:, earth filling under floors with surplus ordinary soil or soil containing gravel or kankar, including ramming, watering and consolidated lead., first class burnt brick work laid in cement sand mortar 1:7 in foundation and plinth, laying 80 mm thick factory made cement conc. inter locking paver bricks after m-40 grade made by block making machine with string vibratory compaction ordinary gray color & pattern over 50 mm thick compacted bed of coarse sand filling the joint with fine sand, complete in all respect ., dismantling brick of flagged stone flooring including concrete base, dismantling concrete plain 1:2:4 mix, cement concrete 1:2:4 with stone ballast or shingle, a. mixing by manual mean, b. mixing by mechanically mean using concrete mixer, laying of dry brick ballast 40mm gauge for flooring, civil work (rate to quoted on csr rates)

CTN :45721059

01 Jul, 2026 50.00 Lacs

Bharatpur - Rajasthan

Tender For corrigendum : estimated cost of construction materials required for mgnrega and other schemes for the financial year 2026-27. - close graded gsb material as pert table\400.a, aggregates 45 mm to 2.8mm, aggregates 6 mm nominal size, stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve., cost of water, / / , - / , , , . . ., , fine , / , - /local, (fly ash), , ( , ), / (for other than road work), 40mm ( )( 1/11), 40mm ( )( 1/11), 20mm ( ), 12/10/6mm ( ), , (5 . ), 63-40 ( 1/11), 63-40 ( 1/11), 90-45 . ( 1/11), ( 1/6), ( 1/6), ( 1/6), (pi 4-6)( 1/6), (22.5 x 11 x 7.50 cm), (i st class), (ii class), / / , (rr), (cr), (15cm ), (23cm / ), / / ( 2-3, 10-12", 2.5-3.5"), (flaky material)(3-4" thick & length and width 1-2"), (dpc,sill,coping,lintel,tand,almirha etc), 25mm , 25-40mm , 40-50mm , 50-75mm , 75-100mm , 100-150mm , / , upto 35mm thick, min. 3 sqft or more area, 60-75mm , min. 3 sqft or more area, , 900 , 901 2300 , 2300 , ( ), 900 , 901 2300 , 2300 , ( 20mm ), 900 , 901 2300 , 2300 , , , ( ii quality/ 20mm ), 900 , 901 2300 , 2300 , , 100 x 75 ., 125 x 75 ., , up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4 m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles / blocks, glazed size-30x45 cm, mosaic size-40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, isi marked, 1.50 . ., 2.50 . ., 0.50 . ., 1.00 . ., 4.00 . ., 6.00 . ., ( , ), , , vu;, (30 mm , ), , ( fe 415/500 ), 18 , , / / / , (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , (24 , 14 ), 40 , , 3 . . , - , , (water bound), - ( / ), ( / ), , hsd, , (25 mm thick), ( ), . . 22 (0.80 mm), . . 24 (0.63 mm), . . 22 (0.80 mm), . . 24 (0.63 mm), , . . 1 . . , . . 22 (0.80 m.m.), 6mm(2.5/2.75x1m), , . . . 1 mm ( / ), (183x90), , . . 15 . . (b class), . . 20 . . (b class), . . 25 . . (b class), . . 75 , . . 100 , . . . 90 . . ( ), . . . 110 . . ( ), . . . 140 . . ( ), . . . 110 . .(2.5kg/sq.cm) , , indian w.c., orrisa w.c., european w.c., (foot rest), (urinal) 430*350*300mm , . . . , (wash-basin )450*300mm , . . . , (s.w.) 100 m.m. , 0.6 . , . . (dia 15 mm) (is mark), . . (dia 15 mm)(is mark), 125 . . . . (grating), . . . np3 , 1200mm , 1000mm , 750mm , 600mm , 450mm , 300mm , isi marked, 20 . . , 25 . . , , . . . ( (is:12701-1989 ), 13/0.20 . . , , 6 x 75 , isi marked, 25 . . , 20 . . , , 20 . . , 20 . ., , 25 . . , 20 . . ( ), , 3 , 2 , , 2 , 3 , , isi marked, 15/16 , 5/6 , , isi marked, 3 5/6 , 6 15/16 , , 2+2 , , , 2+4 , , , 2+6 , , , ( ), 15.00 . . , 40.00 . . , 8 swg (4.00 . . ) (0.117 / .), / , , 8 10 , , 9 , (25-40 hp), , 4000 , 5-7 , 15 . ., niddle/plate , / , ( , ), compressor, hydrolic excavater/jcb (bucket capacity 0.4cum), , , , , , , , , , , , , , , ( ), ( , ), ( 3 , 75 ) , , , , wet mix plant @ 75 tonne capacity per hour, generator 250 kva, water tanker 6 kl capacity 5 km lead with one trip per hour, front end loader 1 cum bucket capacity, tipper 10 tonne capacity, add 10% of cost of carriage to cover cost of loading and unloading, motor grader 110 hp, vibratory roller 8-10 tonne

CTN :45721075

01 Jul, 2026 50.00 Lacs

Bharatpur - Rajasthan

Tender For corrigendum : estimated cost of construction materials required for mgnrega and other schemes for the financial year 2026-27. - close graded gsb material as pert table\400.a, aggregates 45 mm to 2.8mm, aggregates 6 mm nominal size, stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve., cost of water, / / , - / , , , . . ., , fine , / , - /local, (fly ash), , ( , ), / (for other than road work), 40mm ( )( 1/11), 40mm ( )( 1/11), 20mm ( ), 12/10/6mm ( ), , (5 . ), 63-40 ( 1/11), 63-40 ( 1/11), 90-45 . ( 1/11), ( 1/6), ( 1/6), ( 1/6), (pi 4-6)( 1/6), (22.5 x 11 x 7.50 cm), (i st class), (ii class), / / , (rr), (cr), (15cm ), (23cm / ), / / ( 2-3, 10-12", 2.5-3.5"), (flaky material)(3-4" thick & length and width 1-2"), (dpc,sill,coping,lintel,tand,almirha etc), 25mm , 25-40mm , 40-50mm , 50-75mm , 75-100mm , 100-150mm , / , upto 35mm thick, min. 3 sqft or more area, 60-75mm , min. 3 sqft or more area, , 900 , 901 2300 , 2300 , ( ), 900 , 901 2300 , 2300 , ( 20mm ), 900 , 901 2300 , 2300 , , , ( ii quality/ 20mm ), 900 , 901 2300 , 2300 , , 100 x 75 ., 125 x 75 ., , up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4 m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles / blocks, glazed size-30x45 cm, mosaic size-40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, isi marked, 1.50 . ., 2.50 . ., 0.50 . ., 1.00 . ., 4.00 . ., 6.00 . ., ( , ), , , vu;, (30 mm , ), , ( fe 415/500 ), 18 , , / / / , (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , (24 , 14 ), 40 , , 3 . . , - , , (water bound), - ( / ), ( / ), , hsd, , (25 mm thick), ( ), . . 22 (0.80 mm), . . 24 (0.63 mm), . . 22 (0.80 mm), . . 24 (0.63 mm), , . . 1 . . , . . 22 (0.80 m.m.), 6mm(2.5/2.75x1m), , . . . 1 mm ( / ), (183x90), , . . 15 . . (b class), . . 20 . . (b class), . . 25 . . (b class), . . 75 , . . 100 , . . . 90 . . ( ), . . . 110 . . ( ), . . . 140 . . ( ), . . . 110 . .(2.5kg/sq.cm) , , indian w.c., orrisa w.c., european w.c., (foot rest), (urinal) 430*350*300mm , . . . , (wash-basin )450*300mm , . . . , (s.w.) 100 m.m. , 0.6 . , . . (dia 15 mm) (is mark), . . (dia 15 mm)(is mark), 125 . . . . (grating), . . . np3 , 1200mm , 1000mm , 750mm , 600mm , 450mm , 300mm , isi marked, 20 . . , 25 . . , , . . . ( (is:12701-1989 ), 13/0.20 . . , , 6 x 75 , isi marked, 25 . . , 20 . . , , 20 . . , 20 . ., , 25 . . , 20 . . ( ), , 3 , 2 , , 2 , 3 , , isi marked, 15/16 , 5/6 , , isi marked, 3 5/6 , 6 15/16 , , 2+2 , , , 2+4 , , , 2+6 , , , ( ), 15.00 . . , 40.00 . . , 8 swg (4.00 . . ) (0.117 / .), / , , 8 10 , , 9 , (25-40 hp), , 4000 , 5-7 , 15 . ., niddle/plate , / , ( , ), compressor, hydrolic excavater/jcb (bucket capacity 0.4cum), , , , , , , , , , , , , , , ( ), ( , ), ( 3 , 75 ) , , , , wet mix plant @ 75 tonne capacity per hour, generator 250 kva, water tanker 6 kl capacity 5 km lead with one trip per hour, front end loader 1 cum bucket capacity, tipper 10 tonne capacity, add 10% of cost of carriage to cover cost of loading and unloading, motor grader 110 hp, vibratory roller 8-10 tonne

State Government

CTN :45705821

30 Jun, 2026 NA

Sirsa - Haryana

Tender For providing, lowering, laying, cutting (cut surface to be uniformly finished), jointing with rubber rings marked with is : 5382 and testing of spigot and socketted rcc, np2 marked with is : 458-1988 and specials into trenches for all depths including carriage, loading, unloading, stacking, handling, re-handling etc. complete is all respects to the satisfaction to the engineer - in -charge. 4. 350 mm i/d ,`jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 cement sand mortar nearly dry heavily caulked into joints and with end dowels filled with 1:1 cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special , earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. 1. all kinds of soil ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 3. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 40 mm nominal size),brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 2. cement mortar 1:6 (1 cement : 6 coarse sand), cement plaster (in fine sand) 12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)

State Government

CTN :45705912

30 Jun, 2026 NA

Gohana - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,manhole chambers providing and fixing sfrc manhole covers and frames marked with is: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the engineer-in-charge. 1. type:- extra heavy duty set (ehd-35) 560mm clear opening, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. 1. all kinds of soil ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size) .,steel reinforcement steel reinforcement for r.c.c. work, where not included in the complete rate of rcc, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level note: reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. thermo-mechanically treated bars of grade fe-500d or more,brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor iv level in all shapes and sizes in : 1. cement mortar 1:4 (1 cement : 4 coarse sand)

Central Government And Public Sector

CTN :45696206

06 Jul, 2026 52.70 Lacs

Delhi - Delhi

Tender For providing of building materials and execution of the allied works under the work conservation of well area of lahore gate including rampart at red fort - material and work, u. lime katni (in air tight bags), surkhi (free from silt, dust, organic any other foreign material), river course sand (free from silt, dust, organic any other foreign material), gum babool, gur desi, belgiri, jute/sun, lakhori brick (as per site requirements nominal size & specification), brick jeera 6mm (free from clay, organic material), brick aggregate (free from clay, organic material) 20 to 25 mm nominal size, red sand stone thickness 100mm of required size, copper dowel (as per site requirement), red sand stone required (as per site requirement size), red sand stone 50 mm (as per site required size thick for jalie work), red sand stone 40 mm (as per site required size thick undressed for chajja), copper rod 10 mm (as per site requirement), un slaked lime katni (in air tight bags) fine quality, marble dust powder [kg], batasha [kg], araldite [kg], 6 inch dia ballies (6 ft ) [each], ply 12mm thick [m2] water resistant, mud (clay ) [cum] free from impurities, dry uppley [each], planks 50m thick [m2] (well seasoned), jute rope 1 inch [kg], "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leaddismantling old lime plaster", demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge., painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, provision of provising and fixing of galvanised mild steel material xpended material (xpm) jali of 4mm thick silver in clour inluding fixing charges etc complete, "float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)", "providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.2 sal wood", "providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer-in- charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 30 mm thick 26.87.1", "providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the rcc structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

State Government

CTN :45675981

02 Jul, 2026 25.11 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to b, c & d type quarters at jeevanbhimangara, bengaluru from august 2026 to july-2027. (reserved for sc)- item description: cleaning of water storage tank or sump by following method: (1) empty the tank/ sump and make it to near dry, (2) apply bleaching powder uniformally (@ tank capacity x 0.5 gms/litre) inside the tank/ sump and wait for one hour, (3) after one hour, clean/ rinse the tank/ sump with fresh water. repeat the process (2) & (3) for two to three times, all complete, as directed by the engineer-in-charge. , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction m³ jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150mm dia upto 300mm , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 110mm dia., 6 kg/sqcm & class 3 , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 90mm dia., 6 kg/sqcm & class 3 , item description: constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensi

State Government

CTN :45586027

22 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of the items stipulated in the bill of materials with specified specifications. - bosh - electrical drill and hammer drill with bit set, hammer drill concrete - bosch, key hole saw with complete set -4 (1"-6,2"-6,3"-6,4"--6) drill bit k4-6, k10-6), breathing apparatus set with spare cylinder, tent 180 with accessories, inflatable rescue boat with accessories -40hp obm, hydraulic jack 20 tons with ram set matching foot pump, life buoy, angle cutter 14", replacement diamond tipped blade for angle cutter 14"- 350mm, safety goggles, heavy duty working gloves, recipro cutting saw blade, recipro cutting saw blade(152mm), recipro cutting saw blade (130mm), extension cord reel (8mm,100mtr), working lamp with 50mtr lead(with 100w bulp), water tank 500 ltr, mega phone, led search light, led torch light with accessories (multi function), led head light, fire extinguisher portable, rope 10.5mm, 50mtrs, rope nylon 100 mtrs, carabiners, feet extension ladder (30 ft), heavy iron racks, hand saw (18"*410mm), hack saw frame 12" with blade, bolt cutter 30" (750mm), bolt cutter 14" (356.6mm), full body harness, rescue kit bag with accessories, multi purpose iron tool box empty, axe mate kit, rope manila, mfr box, sledge hammer (7kg), sledge hammer (10kg), fire axe, trolley for fiber boat - steel trolley, level 12" (spirit level 12" taparia), screw driver set (5-types), carpenter hammer 3", claw hammer (220gm,8 ozs), brick hammer, long knife, axe, digging iron bar 5.5 feet, crow bar 6 feet, crow bar 3 feet, phawda spade, spade shovels 12" * 10", hoe with wooden handle, pick mattock, bond, pliers 8" (210mm), vise grip 10" plier, chisel for concrete 1", chisel for concrete 1/2, safety helmet, gorund sheet (10*10), stainless steel mug 1 ltr, reflective jacket water proof, handy camera with accessories sony - (hdrcx 9.2mp hd), binocular day vision - olympus, binocular night vision - nikon, honda portable generator 3 kva, multifunction tower light with diesel generator set with trolly, honda submerged pump high -2.9kw discharge 2hp(hose - 25 mtr - 1,cable - 100mtr -1), floating pump 1 hp, chain saw (hitachi 18"), floatable fiber boat with obm (yamaha or equivalent), edelrid bud (royal), edelrid pure straihgt carabiner, edelrid hms magnum screw carabiner, edelrid joker harness, edelrid solid full body harness, edelrid power loc expert sp cord 8mm - 100mtr, edelrid performance 10mm - 100 mtr rope, edelrid performance 12mm - 100 mtr rope, edelrid parrot rope 16 mm - 100 mtr, rockport slithering mitten, figure of eight, anthron double stop decender plus, climbing ascender, rescue helmet, colaman woodsman chair, life jacket, edelrid easy pulley, petzl track transport pulley, seil marine raincoats, rock climbing rope

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

Lead Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors