Latest lead screw Tenders | Government lead screw Tenders

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Central Government/Public Sector

CTN :45291361

12 Jun, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : tender for supply of stay rod , fork end , piston rod , axle nut , nut , nut , pin-link , recoil sleeve , air head lh , air head rh , radius rod pin , pin-link , locking sleeve , bolt , separator , eye end , cap , bracket-rear pick up , fitting - 25 dia rigid flexible , fitting - 25 dia rigid flexible , adapter , fitting - lee nrv , fitting - dc pump outlet , banjo body - bp outlet , vent junction , eye end-kn6e , piston , eye end , special bolt , screw shaft , adaptor , bleed adaptor , bleed screw , adaptor , adaptor dia 10 , adaptor 12 to 06 dia , port union , special adapter , special adapter , special adapter , diffuser , tray rod , spacer

Central Government/Public Sector

CTN :45487346

17 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of hex head screw m16x120 high tensile, as per drawing: is:1364(part-2)-2002, ce-with property class-10.9 to is:1367(part-3)-2002, coating as per mdts-057. item should be procuredfrom rdso approved sources of axle end high tensile cap screws. [ warranty period: 30 months after the date of delivery ] ]

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

CTN :45474582

16 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l.no.98050047.scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalizing stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous), bottom casting, lower spring beam, oxy. cut ferrous ball bearing, miscellaneousellaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar ,ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousellaneous ferrous items etc. as available in the lot, except any non ferrous.qty-140mt.location-east of vm road in ncb-10.

Central Government/Public Sector

CTN :45471058

29 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of axle cap screw for ctrb size 1"%d8-8 unc-2a x 2 1/4" long for ab freight stock,drg no.wd-18016-s-01,alt.2 item.no.1,is:1367/2017. part-3, property clause 8.8, ref.spec. ab-rb-39-2002 (rev-.04) of february 2018 " [ warranty period: 48 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45479562

26 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of hex head screw of size m16 x 2.0 x 50, grade 10.9 as per specification no. is: 1364 (part-1)-2002, ce- with property class- 10.9 to is: 1367 (part-3)- 2002, coating as per mtds- 057. make: tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vendor list available on uvam portal. [ warranty period: 30 months after the date of delivery ] ]

CTN :45448608

15 Jun, 2026 NA

Sonitpur - Assam

Tender For tender for supply of 1030842 , oil seal , 1013103 , bolt , 1013951 , split pin , 1040212 , bearing , 1040215 , ball bearing , rra 1003 , clutch unit complete , rr 1007 , lever , rr 1008 , pin lever , rr 1009 , nut pin cotter , rr 1010 , pin cotter , rr 1011 , link lever , rr 1012 , washer , rr 1014 , coller assy , 1030840 , oilseal , 1030875 , oilseal , 89031 , feredo lining , 88803 , foot pedal spring , 1013948 , split pin , 88995 , wearing disc , 1013979 , split pin , 1019425 , joint pin , 1031203 , grease nipple , 1013106 , bolt hex head , 1013107 , bolt , 1013308 , set screw , 1017827 , slotted nut , 1013930 , slotted pin , 91385 , asbestos rope , 84838 , packing , 1013351 , set screw , 1013402 , set screw , 89451 , inlet pipe , 89452 , outlet pipe , 1031703 , jubilee clip , 88886 , spring for adjusting rod , 88887 1 , nut for adjusting rod , 1013912 , split pin , 1018621 , taper split pin , 1030346 , key , 1019451 , joint pin , 1018312 , plain washer , 1013967 , split pin , 88929 , bush , misc 539 60 , cap axle , 88874 , bush , 88980 , pin , 88872 , hind axle coller , 1014043 , split pin , 82694 5 , fuel strainer , 94454 , fuel oil stainer , 89931 , fuel return pipe , 89933 , fuel suction pipe , 89966 , kigass primer , 89934 , delivery pipe , 89937 , lub pipe for diff shaft , 89938 , lub pipe c speed shaft r h , 89942 , grease pipe-brake shaft r h , 2524729 , fuel pipe -tank to lift pump , 2523137 , fuel pipe -lift pump to filter , 2523138 , fuel pipe -filter to engine , 2523574 , union for lube pipe , misc328 59rev , push pull control assy , 89970 , ammeter , se01202 , indicator lamp , 2523058 2j , engine oil pressure guage , 2523058 2f , starter switch , 2523058 , heater switch , c8pp11331000 , work light assy , c836b5005000 , hour meter , 57658 , loom pannel to starter and dynamo , 57740 , cable 14 012 reb for rh tail lamp , 70507000000 , toggle switch , c8v194307500 , horn 12 v

Central Government/Public Sector

CTN :45454404

27 Jun, 2026 NA

Vadodara - Gujarat

Tender For supply of axle end cap screw 1 1/8" dia-7unc-2a x 2 1/2" long for class-k ctrb to is spec.1367 part3,2002 property class 8.8 drg no. wd-18016/s-01, alt 2 or latest, item no 2. [ warranty period: 48 months after the date of delivery ] ]

CTN :45433161

15 Jun, 2026 NA

Kolkata - West Bengal

Tender For supply of clyde oem spares - towbar tube, handle weld, pump support bracket weld, hand pump, 737-100 thru 900 head assembly, lunette weld, axle lift assembly, keeper block & pin weld, spring brkt & attach angle weld l.h., spring brkt & attach angle weld r.h., cylinder end sleeve, an washer, 1/2, 1/2-20 nylok nut, jam, cap screw, 1/2-20 unf x 2 3/4" lg., street elbow, swivel adapter, 3/8-24 x 2 3/4 lg. c.s., 3/8 washer an, 3/8-24 unf nylok nut, 3/8-24 unf x 1 1/4 lg. c.s., 1/4-28 x 3/4 lg. cap screw, 1/4-28 x 1 lg. c.s., 1/4" washer, 1/4-28 nylok nut, 1/4-20 x 3/4 self tapping, shear bolt, clyde logo(black), placard, shear bolt replacement, serial number plate, rub plate, extension spring, 3/8-24 unf x 1 1/2 lg. c.s., 3/8-24 x 1 lg. cap screw, skeg, towbar, shear bolt holder, small, cylinder, hose assembly, placard, hyd pump part number, placard, hyd oil, placard, tire pressure, shear bolt, b737 100-900 placard

Lead Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector