Latest lead sheet scrap Tenders | Government lead sheet scrap Tenders

CTN :43066390

26 Dec, 2025 1.05 Crore

Lucknow - Uttar Pradesh

Tender For supply of impella heart pump device (2. 5 cp 5. 0) , sterilized lead free radiation protection sheet for interventional procedures (radpad)

State Government

CTN :43081585

15 Dec, 2025 49.5 Thousand

Mayabunder - Andaman And Nicobar Islands

Tender For providing lead sheet door for x - ray room at phc billiground under sub - division no. - iii, swadeshnagar, nacd, apwd, mayabunder.

Corporations/Associations/Others

CTN :43050100

12 Dec, 2025 1.39 Crore

Ichalkaranji - Maharashtra

Tender For providing supplying submersible pump, and allied material for newly 100 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 sw

Corporations/Associations/Others

CTN :43050103

12 Dec, 2025 1.49 Crore

Ichalkaranji - Maharashtra

Tender For 2 .providing supplying submersible pump, and allied material for newly 107 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16

State Government

CTN :43055645

15 Dec, 2025 6.00 Lacs

Jobner - Rajasthan

Tender For 56/2025-26 interconnection work in various schemes under sub. division kishangarh renwal. - providing, lowering, laying, aligning, fixing in position at all level/ depths ci class - b specials as per is : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per technical specifications and as per direction of engineer. plain ended ci specials including tail piece, spigot end and socket end. up to 300 mm dia note : e/w to be measured and paid separately., providing and fixing of flanged/ plain ended ms specials made from ms sheet strips of relevant is specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of engineer-in-charge. ms pipe specials upto 600mm dia (with minimum 5mm thickness sheet), earth work in excavation by mechanical means (hydraulic excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 mtr. including required all safety provisions etc.:, all kinds of soil, dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work., providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)., dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work., bituminous courses, granular courses, work of lnter connection in ac/pvc

State Government

CTN :43055648

15 Dec, 2025 6.00 Lacs

Jobner - Rajasthan

Tender For 55/2025-26 interconnection work in various schemes under sub. div. sambhar lake. - providing, lowering, laying, aligning, fixing in position at all level/ depths ci class - b specials as per is : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per technical specifications and as per direction of engineer. plain ended ci specials including tail piece, spigot end and socket end. up to 300 mm dia note : e/w to be measured and paid separately., providing and fixing of flanged/ plain ended ms specials made from ms sheet strips of relevant is specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of engineer-in-charge. ms pipe specials upto 600mm dia (with minimum 5mm thickness sheet), earth work in excavation by mechanical means (hydraulic excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 mtr. including required all safety provisions etc.:, all kinds of soil, dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work., providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)., dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work., bituminous courses, granular courses, work of lnter connection in ac/pvc pipe lin

CTN :42775221

08 Dec, 2025 3.00 Lacs

Amritsar - Punjab

Tender For corrigendum : supply of spare parts : :--self starter armature , dc alternator , indicator with linkage , tyre wheel drum nut , wheel drum nut with stud , canopy light , panel board canopy light , convey light , back tell light , stopper assy , d compressor lever , oil filter , fuel filter , fan belt , flexible silencer pipe , bty terminal connector , self starter field coil , self starter bushing , self starter brush , self starter carbon brush plate , injector , fuel pipe 19 1 oblique 2 , benjo nut 19 , fuel pipe 17 1 oblique 2 , benjo nut 17 , benjo washer 17 , benjo washer 19 , anabond tube , gasket sheet 1 point 5 mm , self starter slow nut switch , avr , stopper , output socket 60a with cap , panel indicator , bty possitive and negative lead , earthing set , fuel pipe 19 1 oblique2 , fuel pipe 17 1oblique 2 , fuel pipe 171 oblique 2 , reverse bearing , impeller , propeller shaft , reverse gear , bearing caring block , reverse and forward gear

CTN :43051249

15 Dec, 2025 NA

Goa - Goa

Tender For supply of black lead pencils (v3) conforming to is 1375 (q4) , writing pens (q4) , self adhesive flags (v3) (q4) , glue stick (v3) (q4) , markers and highlighters (q4) , eraser (v2) (q4) , paper adhesives, liquid gum and office paste type (v2) conforming to is 2257 (q3) , staplers(v3) (q4) , flexible transparent sheet (v2) (q3)