Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get
Tender For supply of one coach set of side wall frame work, welding parts and carline for laccn amrit bharat (829) shells to drg nos. 1)frame work to drgs no 82914013, alt 'nil' - 1 no. 82914015, alt 'nil' - 1 no. items in drawings above for column i to be supplied as loose. 2)carline to drgs no 82914010, alt 'nil' - 1 no. 82914011, alt 'nil' - 1 no. 3)welding parts to drgs no 82914004, alt 'b' - 1 no. 82914005, alt 'b' - 1 no. 4)housing for leddestinationboard to drg no 87414028, alt 'b' - 2 nos. 5) cable clamp to drg no aac14244, alt 'a' - 50 nos. to be supplied as coach set only. special condition : for carline packing drawing icf/j&t/sk-1882 to be followed for partition frame and welding parts packing drawing icf/j&t/sk-1865 alt 'a'. other partition frames not fitting in the container shall be stacked one over the other, secured using packing strip and placed in steel pallet. the height of each stack shall not exceed 750mm for easy handling. suitable and sufficient packing strips to be used such that stacked items do not disintegrate during transit, storage and handling. [safety item] [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply and installation of cover for housing of leddestinationboard with adhesive to drg. no. 874-6-4-010, col-1, alt-a for amrit bharat coaches. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For (hsn code: 94059900) supply of cover for housing of leddestinationboard with adhesive to drg. no. 874-6-4-010, col-1, alt-a or latest for amrit bharat coaches, make-dynamic or similar. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : supply of 69457-passenger announcement system , 69458- emergency lighting system , 69974-fan for driver cabin , 69122-leddestinationboard light , 69108-ledtype light with night lamp
Tender For supply of led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , mccb 4 pole 250 amps 36 ka , socket gi 100 mm , led lamp 12 watt type b22 , gi reducer socket 25 x 15 mm , socket gi 25mm , pvc swr pipe of size 75mm 6 feet long , led recessed light 24 watt , copper cable 0.75 sqmm single core , telescopic channel of size 16 inch long , pvc edge bending tape 25mm width 2 mm thick in 50 mtr roll , piano hinges of stainless steel of 6 inch long , tee reducing 25 x 15mm , door stopper aluminium double stay heavy duty , laminated hylum sheet of size 125 x125 x 3mm thick , bulk head fitting 10 watt , seat and back for chair c b steel with or without arms , led tube light 9 or 10 watt , glass pane 3mm thick of size 0.52cm x 0.29 cm as per sample , toilet paper holder cp , plug top 15 or 16 amp , cp bib cock size 15 mm long body , sink ss of size 20 inch x 17 inch for kitchen without d bd , curtain bracket , cp wall mixture 15mm non telephonic , pvc internal fitting for low level cistern , cable joint kit for 120 sqmm , cable joint kit for 150 sqmm , led mirror light 12w , distribution board 4 way spin , distribution board 8 way spin , mcb tpn 100 amp , cable joint kit for 240 sqmm , cable joint kit for 185 sqmm , cable joint kit for 95 sqmm , ppr union 40 mm , submerised cable 06 sqmm copper , mccb 4 pole 100 amps 25 ka , electronic fan regulator 120 watt 5 step 230 v , ppgi sheet 0.5mm thick 10 feet x 3 feet , mccb 4 pole 200 amps 36 ka * /bid number : gem/2026/b/7662412 + /dated: 16-06-2026 ' ' / bid document 1 / 39
Tender For supply, installation , testing and commissioning of gps based public address& passenger information system (papis) and leddestinationboard ( one line)to drg. no. 140-6-4-088, col-iii, alt-c and to spec. rdso/cg - 18001 (rev.2) or latest in lwfac/pp2 coaches. fitment of destinationboard shall be sunk-in type and clause 14.6.2, sl.no.(a) of rdso specification rdso/cg-18001 rev-02 shall be applicable.ie one line. note:-packing condition shall be as per doc no pc-063 of icf/md/spec-485. ]
Tender For supply of one coach set of side wall frame work, carline and welding parts for laccw amrit bharat (828) shells to drg nos 1) frame work to drgs no 82814005, alt 'nil' - 1 no 82814006, alt 'nil' - 1 no items in drawings above for column i to be supplied as loose. 2) carline to drgs no 59314014, alt 'f' 1 no 59314015, alt 'g' 1 no single piece crf carline to drg no aad14545, alt 'b' & aad14546, alt 'b'to be folllowed 3) welding parts to drgs no 82814009, alt 'c' - 1 no 82814010, alt 'c' - 1 no. 4) housing for leddestinationboard to drg no 87414028, alt 'b' - 2 nos special condition : to be supplied as coach set only. for carline icf/j&t/sk-1882, alt 'a'. the chair pillars shall be packed in the container as per icf/j&t/sk-1865-alt 'a'. other partition frames not fitting in the container shall be stacked one over the other, secured using packing strip and placed in steel pallet. the height of each stack shall not exceed 750mm for easy handling. suitable and suffcient packing strips to be used such that stacked items do not disintegrate during transit, storage and handling. (safety item) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of one coach set of side wall frame work, carline and welding parts for lfac amrit bharat (827) shells to drg nos 1) frame work to drgs no 82714006, alt'nil' - 1 no 82714007, alt'nil' - 1 no items in drawings above for column i to be supplied as loose. 2) carline to drgs no 62414007, alt 'd' - 1 no 62414008, alt 'd' - 1 no 3) welding parts to drgs no 82714010, alt 'c' - 1 no 82714011, alt 'b' - 1no 4) housing for leddestinationboard to drg no 87414028, alt 'b' - 2 nos special condition : to be supplied as coach set only. for carline icf/j&t/sk-1882, alt 'a' the chair pillars shall be packedin the container as per icf/j&t/sk-1865-alt 'a'. other partition frames not fitting in the container shall be stacked one over the other, secured using packing strip and placed in steel pallet. the height of each stack shall not exceed 750mm for easy handling. suitable and suffcient packing strips to be used such that stacked items do not disintegrate during transit, storage and handling.. (safety item). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]