Get complete information related to latest Led Streetlight Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Led Streetlight Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Led Streetlight Tenders.
Tender For provide electrical material at grampanchayat jambhiwali tal khalapur dist raigad - sensor, surya straith light 50w, surya straith light 72w, panasonic straith light 50w, panasonic straith light 72w, flood light 50w, led bulb 9w, led bulb 12w, led bulb 18w, led bulb 23w, led bulb 30w, submarcial wire 2.5mm * 3core, fle wire 2.5mm * 3core, 6amp switch, 6amp socket, 16amp switch, 16amp socket, surya flood light 100w, 3 pin top 16amp, 3 pin top 6amp, service wire aluminium 6 core, service wire aluminium 8 core, service wire aluminium 12 core, service cable 3 phase coper, service cable 4 phase coper, holder for simple bulb, tape bundle, tripple 18 ampier, tripple 32 ampier, starter for 3 hp pump (lnt crompton), starter for 5 hp pump (lnt crompton), starter for 15 hp pump (lnt crompton), street lite set led 50 wat with all fitting, pipe for cement poll with clamp, nut bolt, pipe, pipe for iron poll with clamp, nut bolt, pipe, capacitor for fan, main switch icdp, simple bulb 60 vat philips, street lite set led, 50 wat with all fitting (micronic co.), street lite set led, 70 wat with all fitting (micronic co.), street lite set led, 100 wat with all fitting (micronic co.), street lite set led, 50 wat with all fitting (syska co.), street lite set led, 70 wat with all fitting (syska co.), street lite set led, 100 wat with all fitting (syska co.), street lite set led, 50 wat with all fitting (philips), street lite set led, 70 wat with all fitting (philips), street lite set led, 100 wat with all fitting (philips), solar ledstreetlight 50 wat with all fitting (syska co.), solar ledstreetlight 70 wat with all fitting (syska co.), solar ledstreetlight 100 wat with all fitting (syska co.), solar ledstreetlight 50 wat with all fitting (philips co.), solar ledstreetlight 70 wat with all fitting (philips co.), solar ledstreetlight 100 wat with all fitting (philips co.), four phase cable wire, one phase fitting wire, electric celling fan (cromton), electric celling fan (havells), led bulb syska 24wt, led bulb syska 18wt, control panal 32 amp, control panal 63 amp, cfl bulb 75 vat (ajenta), cfl bulb 75 vat (crompton), screw, electric tube 4 ft fixtures with all fitting, electric cut out, inverter luminous 1500 va (with all fitting including exide battery), inverter luminous 2000 va (with all fitting including exide battery), inverter luminous 2500 va (with all fitting including exide battery), mccb (lt) 10amp, mccb (lt) 16amp, mccb (lt) 28amp, mccb (lt) 32amp, leg 16, leg 18, leg 32, led booster (50 vat) (micronic co.), led booster (70 vat) (micronic co.), led booster (50 vat) (syska co.), led booster (70 vat) (syska co.), led booster (50 vat) (philips co.), led booster (70 vat) (philips co.), led stips (50 vat) (micronic co.), led stips (70 vat) (micronic co.), led stips (50 vat) (syska co.), led stips (70 vat) (syska co.), led stips (50 vat) (philips co.), led stips (70 vat) (philips co.), air conditioner (a.c) 1 ton carrier (with including all taxes & service charges), air conditioner (a.c) 1 ton blue star (with including all taxes & service charges), air conditioner (a.c) 1.5 ton blue star (with including all taxes & service charges), air conditioner (a.c) 1.5 ton carrier (with including all taxes & service charges), air conditioner (a.c) 2 ton blue star (with including all taxes & service charges), air conditioner (a.c) 2 ton carrier (with including all taxes & service charges), freeze (samsung) 160 ltr, freeze (samsung) 180 ltr, freeze (lg) 160 ltr, freeze (lg) 180 ltr, water puryfier 12 ltrs (with including taxes & services), elctrical shagadi prestige 230vt, elctrical shagadi prestige 2000wt, honda co. generator (7 kva), honda co. generator (7.5 kva), honda co. generator (10 kva), honda co. generator (15 kva), honda co. generator (20 kva), runmax co.generator 13 kva (silent soundproof power electric diesel ), runmax co.generator 15 kva (silent soundproof power electric diesel ), runmax co.generator 20 kva (
Tender For providing various types of electrical material for various work in fine yaer 2026-27 at vp kharshet - matrial, led bulb 9w, led bulb 12w, led bulb 15w, led bulb 18w, led bulb 23w, led bulb 35w, led bulb 40w, ledstreetlight 18w to 24w with aouto sen, ledstreetlight 36w with aouto sen, ledstreetlight 40w with aouto sen, ledstreetlight 18w to 24w, ledstreetlight 36w, ledstreetlight 40w, ledstreetlight 48w, ledstreetlight 60w, led flood lights 30w, led flood lights 50w, led flood lights 60w, led flood lights 100w, led flood lights 150w, led flood lights 200w, strerlight holding calmp ms, strerlight holding calmp cement, strerlight holding pipe, .5 hp moter 1ph, 1 hp moter 1ph, 3 hp moter 3ph, 5 hp moter 3ph, 7.5hp moter 3ph, 10hp moter 3ph, .5 hp moter 1ph starter, 1 hp moter 1ph starter, 3 hp moter 3ph starter, 5 hp moter 3ph starter, 7.5 hp moter 3ph starter, 10 hp moter 3ph starter, frp box, mcb 16amp, mcb 32amp, mcb 64amp, rccb 32amp, rccb 63amp, holder, 2.5sq service wire ( mtr ), 4sq service wire ( mtr ), 6sq service wire ( mtr ), 10sq service wire ( mtr ), 4sq armad cable ( mtr ), 6sq armad cable ( mtr ), 10sq armad cable ( mtr ), .5sq copper wire ( mtr ), 1sq copper wire ( mtr ), 1.5sq copper wire ( mtr ), 2sq copper wire ( mtr ), 2.5sq copper wire ( mtr ), 4sq copper wire ( mtr ), casing capping patti, 6 amp swith, 6 amp swacket, 16 amp swith, 16 amp swacket, fan refulater, g i pole 2.5 inch, g i pole 3 inch, g i pole 3.5 inch, streetlight arm, highmast ring, octangonale pole 6 mtr, octangonale pole 7 mtr, octangonale pole 9mtr, octangonale pole 12mtr, tublar pole ms 7 mtr, tublar pole ms 9 mtr, tublar pole ms 12 mtr, highmast flood light 9mt/12mtr pole per lights fitting chargess, streetlight 7mt/9mtr pole per light fitting chargess, g i tar, bobin, 1/16 sq mm conductor mtr, 1/25 sq mm conductor mtr, solar streetlights 9w set, solar streetlights 12w set, solar streetlights 15w set, solar streetlights 18w set, highmast installtion charges, streetlight installtion charges, solar streetlight installtion charges, dp box, celing fan, electrical rewinding charges 3 hp, electrical rewinding charges 5 hp, electrical rewinding charges 7.5 hp, stucter per kw, solar pack 1kv, solar pack 2kv, solar pack 3kv, solar inverter 1kw, solar inverter 2kw, solar inverter 5kw, solar inverter 10kw, inverter 1kw, inverter 2kw, inverter 3kw, inverter 5kw, inverter 10kw, solar pannal per watt, solar water pump set 1hp, solar water pump set 2hp, solar water pump set 3hp, solar water pump set 5hp, solar water pump set 7.5hp, solar water pump set 10hp, solar streetlight 9w/8ah /40w set, led flood lights reparing chargess 30w, led flood lights reparing chargess 50w, led flood lights reparing chargess 100w, led flood lights reparing chargess 150w, led flood lights reparing chargess 200w, led street lights reparing chargess 24w, led street lights reparing chargess 36w, led street lights reparing chargess 50w, led street lights reparing chargess 60w, led street lights reparing chargess 72w, holder cap, voltage stablizer 10 kw, voltage stablizer 20 kw, voltage stablizer 40 kw
Tender For repairs maintenance of electrical and mechanical equipments high mast light search lights and other miscellaneous items at cad pulgaon - disconnecting and taking down existing unserviceable street lights/flood lights any type/watts from pole/wall and dismantling the light fittings. repairing/replacing unserviceable parts re-fixing the same on pole/wall after testing and removal of carbon from line jumpers/tightening of jumper/alignment of fitting defective street light/security light/flood lights fitting/led light from electric pole complete all as directed by eic. note: spare parts and accessories such as led driver, and connected items etc will be measured and paid separately under respective item as supply only and fixing is deemed to be included in this item., supply only led street light driver for 45 watts led street light as per make given all as specified and directed by eic., supply only led street light driver for 60 watts led street light/ flood light type as per make given all as specified and directed by eic., supply only led street light driver for 100 watts led street light/ flood light type as per make given all as specified and directed by eic., supply and fix in repair ledstreetlight of 45 watt comprises of pressure die cast aluminium housing & having system efficiency>123 lumens/watt i.e 5570 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k,pf>0.9,driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account. 3.the complete fitting along with led module, driver, surge protection device and all associated accessories shall be covered under 05 (five) years comprehensive warranty by the contractor from the date of invoice.make : philips/ wipro/crompton, supply and fix in repair ledstreetlight of 60 watt comprises of pressure die cast aluminium housing & having system efficiency>110 lumens/watt i.e 6670 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k, pf>0.9, driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic. note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account.3. the complete fitting along with led module, driver, surge protection device and all as
Tender For purchase of xray and radiologoy items - part -a, developear powder to make 22.5 ltr., developear powder to make 13.5 ltr., fixer powder to make 22.5 ltr., fixer powder to make 13.5 ltr., fuji medical dry imaging flim d1-hlsizes 8"x10", fuji medical dry imaging flim d1-hlsizes 10"x12", fuji medical dry imaging flim d1-hlsizes 11"x14", fuji medical dry imaging flim d1-hlsizes 14"x17", usg gel 250 ml, dental intraoral x-ray film size 2, sono print roll type 1 normal, x ray cassettes size 12"x15" cassettes single side lock, x ray cassettes size 10"x12" cassettes single side lock, x ray cassettes size 8"x10" cassettes single side lock, x ray cassettes size 14"x17" cassettes single side lock, ip cassette for fuji crfuji ip cassette . ip cass cc bwpb 35.4 x 43 cmie, ip cassette for fuji crfuji ip cassette . ip cass cc bwpb 35.4 x 35.4cmie, ip cassette for fuji crfuji ip cassette . ip cass cc bwpb 25.2 x 30.3 cmie, ip cassette for fuji crfuji ip cassette . ip cass cc bwpb 20.1 x 25.2 cmie, 12"x15"intesifying screen blue sensitve, 10"x12"intesifying screen blue sensitve, 8"x10"intesifying screen blue sensitve, 14"x17"intesifying screen blue sensitve, fuji imaging plate ip -6 st 35.4 x 43 cmie, fuji imaging plate ip -6 st 35.4 x 35.4cmie, fuji imaging plate ip -6 st 25.2 x 30.3 cmie, fuji imaging plate ip -6 st 20.1 x 25.2 cmie, hangers stainless steel size 12"x15", hangers stainless steel size 10"x12", hangers stainless steel size 8"x10", hangers stainless steel size 14"x17", processing tanks 22.5ltr stainless steel, safe light with filter, led apron 0.25 mm to 0.5 mm lead size medium, led later 0 - 9 big size, led later r&l big size, x-ray protecion mobile screen, cassette pass box metal four door type 24" x 24" x 20" d, x- ray clip big size stainless steel, cassatte holder l/r metal marker, lead hand gloves big size, lead sheet 14"x17", lead divider 17"x7", lead divider 15"x6", lead divider 12"x5", illuminator view box 14"x17", lead spects, chest stand head to toe, lead barrier 3 fold, medical dry film for dry printer 08"x10", medical dry film for dry printer10"x12", medical dry film for dry printer11"x14", medical grade ink for dry printer
Tender For corrigendum : rfp for empanelment of agencies for comprehensive operation and maintenance contract along with phase wise replacement of ledstreetlights and ccms panels with its accessories as required for varanasi municipal corporation for 7 years
Tender For bid to ras supply of slotting saw cutter size 0.8 by 75 by 25.4 mm , slotting saw cutter size 1.5 by 75 by 25.4 mm , slotting saw cutter size 1.2 by 75 by 25.4 mm , slotting saw cutter size 1 by 75 by 25.4 mm , angular cutter 45 degree both side , angular cutter 60 degree both side , t slot cutter size 6 by 10 by 2 shank by dia by width , t slot cutter size 12 by 28 by 10 shank by dia by width , t slot cutter size 12 by 18 by 8 shank by dia by width , milling vice swable base standard size , end mill cutter 30 mm , tap size 7 by 32 into 56 tpi , die size 7 by 32 into 56 tpi , tap size 6 into 1 mm pitch , tap 4.8 into 32 tpi , ring spanner set stanley set 12 pieces , taparia socket set 8 mm to 32 mm ratchet handle goti set , breeze deluxe 450 mm hand leaver shearing machine b4ds18 , angle grinder bosch 4 inch gws 800 , tong smith 18 inch shandasi , wire cutter 8 inch , holder arc welding machine 800 a , impact screw driver set taparia , digital micrometer mitutoyo 0 to 25 mm , gas welding torch big esab , oxygen gas regulator two stage esab , d a gas regulator two stages , digital multimeter , glue gun 200 watts , screw driver 10 inch taparia two way , screw driver 04 inch taparia two way , die handle 21 mm inner dia , tap handle 08 inch , thread gauge in inches mitutoyo , thread gauge in millimeter mitutoyo , center drill 01 mm , center drill 1.5 mm , center drill 02 mm , drill bit 4.5 mm , drill bit 5.2 mm , drill bit 5.3 mm , drill bit 5.50 mm , drill bit 03 mm , drill bit 5.7 mm , tap 5 into 0.8 mm pitch , tap 4 into 0.7 mm pitch , die 6 into 1 mm , cardless electric screw driver with r by f function led light and 43 pcs accessories 240 rpm , drill chuck with key and arbor mt 2 shank 1 to 13 mm capacity heavy duty , hss toll bit 1 by 2 into 4 inch , cutting blade 14 inch bosch , cutting blade 04 inch bosch , grinding wheel 04 inch bosch , emery paper no 80 roll , vernier caliper bty 3 v lithium coin , power hacksaw blade 400 into 32 into 1.6 mm , hacksaw blade 24 tpi , hacksaw blade 32 tpi , mini hacksaw blade , file handle plastic , grinding wheel 10 inch rough , grinding wheel 10 inch smooth , diamond dresser grinding wheel , hss tool bit 1 by 2 into 6 inch miranda , hss tool bit 1 into 8 inch miranda , hss tool bit 5 by 16 into 6 inch miranda , hss tool bit 1 by 4 into 4 inch miranda , locktite 495 , lifeboy shop , duco thinner , shalimar normal thinner , squirrel hair mop brush , d battery 1.5 v , white paint 100 gm pack , red paint 100 gm pack , kerosene oil , gas mask , bulb 60 watts , machine cleaning brush 02 inch , painting brush 02 inch , painting bruch 01 inch , emery paper no 220 roll , thinner trisul 01 ltr pack , asian paint white 01 ltr pack , asian paint og 01 ltr pack , asian paint black 01 ltr pack , red oxide primer 01 ltr pack , cotton waste , welding rod no. - 10 esab , gas lighter welding works , illuminator 20 watts , soap hand wash , goggles for grinding machine , total auto darking welding goggle tsp 9403 , gas hose pipe 08 mm wp 15 kg blue , gas hose pipe 08 mm wp 15 kg red , brass brazing rod 1 by 16 inch , plastic container 01 ltrs capacity , file cord wire brush small , pencil cell aa battery , remote cell aaa battery , file flat bastard 12 inch , file flat bastard 10 inch , file flat smooth 10 inch , file half smooth 8 inch , file flat bastard 8 inch , file flat smooth 8 inch , needle file set 12 pcs set , file flat bastard 6 inch , file flat smooth 6 inch , file flat bastard 4 inch , file triangular smooth 6 inch , file half round bastard 8 inch , file round bastard 10 inch , file diamond flat 6 inch , file triangular diamond 6 inch , allen key set 1.5 to 12 mm , lever oil can heavy duty //bid details 2 / 69 lever oil can heavy duty
Tender For supply of electic material - , 14 w led bulb, 18 w led bulb, 26 w led bulb, pendant holder, 1/18 wire (aluminium), 1/18 wire (copper), 2.5 sq. m.m. service wire, 4 sq.m.m. service wire, 6 sq.m.m. service wire, 10 sq.m.m. service wire, 2.5 m.m.x 4 core cable (aluminium), 4 m.m.x 4 core cable (aluminium), 6 m.m.x 4 core cable (aluminium), 10 m.m.x 4 core cable (aluminium), 16 m.m.x 4 core cable (aluminium), 2.5 m.m.x 3 core cable (copper), 4 m.m.x 3 core cable (copper), 2.5 m.m.x 4 core cable (copper), 4 m.m.x 4 core cable (copper), 6 m.m.x 4 core cable (copper), 10 m.m.x 4 core cable (copper), 1 sq.m.m. multistand wire (copper), 1.5 sq.m.m. multistand wire (copper), 2.5 sq.m.m. multistand wire (copper), 4 sq.m.m. multistand wire (copper), 6 sq.m.m. multistand wire (copper), 10 sq.m.m. multistand wire (copper), cello tape, 30 w led street light fitting, 50 w led street light fitting, 30 w led driver, 50 w led driver, 30 w led pcb, 50 w led pcb, 50 w led frad light fitting, 100 w led frad light fitting, 150 w led frad light fitting, 200 w led frad light fitting, 100 w led hybe fitting, 150 w led hybe fitting, 200 w led hybe fitting, 3/4" l bracket, 1" l bracket, hukup wire, cement pole clamp, lokhandi pole clamp, 45 w cfl fitting, 36 w cfl fitting, 85 w cfl fitting, cfl fitting holder, porselin holder (chinimati holder), 36 w pll tube, 36 w pll elcetronic chok, 36 w pll holder, strip conector, 16amp. x 250 v main switch, 32amp. x 250 v main switch, 16amp. x 500 v main switch, 32amp. x 500 v main switch, 63amp. x 500 v main switch, 32 amp. riverce forward switch, 16amp. x 250 v fuse kit kat, 16amp. x 500 v fuse kit kat, 32amp. x 250 v fuse kit kat, 32amp. x 500 v fuse kit kat, 63amp. x 500 v fuse kit kat, 100amp. x 500 v fuse kit kat, 200amp. x 500 v fuse kit kat, 16amp.change over switch, 32amp.change over switch, 16amp. mcb (s.p.), 32amp. mcb (s.p.), 63amp. mcb (s.p.), 6amp. mcb (s.p.), 16amp. mcb (d.p.), 32amp. mcb (d.p.), 40amp. mcb (d.p.), 63amp. mcb (d.p.), 1/2 mcb box, 4 way mcb box, 8 way mcb box, 21x15 miter box, 1.5 x 2 miter box, 2.5 x 3 miter box, row rubber, copper lugs, aluminium lugs, hand gloves (11000w), bobin, g i wire, wire cutter, pakkad, 20 w led tube set, 25 w led tube set, celing fan, table fan, wall fan, pedstal fan, 40 w led solar street light fitting, 60 w led solar street light fitting, 4 mtr. round pole, 6 mtr. round pole, 8 mtr. round pole, tester, big tester, 1" casing patti, 12w/10 a h /11.1v led street light solar, 14w/12 a h /12.8v led street light solar, 20w/12 a h /12.8v led street light solar, 24w/24 a h /12.8v led street light solar, 30w/24 a h /12.8v led street light solar, 36w/30 a h /12.8v led street light solar, 100 a mcb s.p., 70 w led driver, 100 w led driver, 150 w led driver, 70 w led pcb, 100 w led pcb, 150 w led pcb, 70 w ledstreetlight fitting, 100 w ledstreetlight fitting, 150 w ledstreetlight fitting, clamp nut bolt