Latest leg press machine Tenders | Government leg press machine Tenders

State Government

CTN :45601849

08 Jul, 2026 2.20 Crore

Raigarh - Chhattisgarh

Tender For corrigendum : supply of back extension equipment , static cycle outdoor exercise cycle , chest press , body rotation or twister , shoulder builder , horse rider , seating and standing twister , parallel bar , metal swing with back support , air walker , loop ring , double fitness bar , push up bar , leg press - outdoor gym equipments (q3) , air walker / stroller - outdoor gym equipment (q3)

CTN :45738946

21 Jul, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of replacement of broken wires of multi gym trainer , plyometric boxes set of four boxes , multi purpose chin up dip assisted machine , dual function leg extension and leg curl machine , leg press machine , kettlebell four kg , kettlebell eight kg , weighted vest ten kg

CTN :45673050

15 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of seated leg press machine , smith machine with functional trainer , multi-functional weight bench , three tier dumbbell rack , chin up or dip or vertical knee raise , adjustable bench , aluminium rowling handle , commercial round dumbbells

Central Government/Public Sector

CTN :45688661

01 Jul, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-146; e24 during routine damage control and fire fighting exercise 01 no 15 tph submersible pump is not getting started and 10 tph submersible pump discharge side ..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-146; e25 rubber mat flooring in ac compartment is deteriorated and damaged due to fair life wear and tea the same is required to be renewed with a new rubber mat ..

CTN :45646932

07 Jul, 2026 2.33 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground-establishment of sports infrastructure facilities at kalavayal ground in puthenkurish grama panchayath in kunnathunadu lac, ernakulam- supply and installation of open gym equipment - retender - open gym equipments, od48095/2026-2027 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes 88mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe. seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. end closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. pin 25 mm m.s. bright bar pin. circlips a 24 circlips are used for assembly. bearing bushes - 60 mm od seamless pipe / bar. bearing- use is 6005 permanent lubricated reputed brands. grips high quality rubber 46 mm od. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48569/2026-2027 cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b? class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od b class g.i. pipe. and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality rubber. bearing- use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25mm m.s. bright bar. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 80-100 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48098/2026-2027 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to s

CTN :45646934

07 Jul, 2026 2.25 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground -development of jai hind stadium in njarackal grama panchayath in vypin lac, ernakulam district-supply and installation of open gym equipment - outdoor gym equipments, od268048/2025-2026 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od “b” class gi pipe. foundation plate –m.s. round plate of ø 250mm & 8 mm thick. foundations cover capdome shape of pp / nylon / hdpe material. remaining frame -made up of ø 48 mm od “b” class g.i. pipe. handle - made up of ø48mm od “b” class g.i. pipe. link - made up of ø 48 mm od “b” class g.i. pipe. seat & back rest – 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. bearing bush closing cap’s– pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap – dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin – made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips–a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268050/2025-2026 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od ?b? class gi pipe dually bending design. foundation plate?m.s. round plate of ø 250 mm & 8 mm thick. paddle? ø 42 mm od round gi pipe. handle ? ø 33 mm od ?b? class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s -pp / nylon / hdpe material. bracket - 8 mm thick laser profile is use to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin?s ? ø 25mm m.s. bright bar pin. circlips? a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268054/2025-2026 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes - 88 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe.seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. e

CTN :45634709

20 Jun, 2026 NA

Vadodara - Gujarat

Tender For tender for equipments of physiotherapy unit for vadodara municipal corporation. - interferential therapy unit, exercise staircase(for wooden stairs), short wave diathermy machine 1000 watt, transcutaneous electrical nerve stimulation (tens) unit, three wheel shoulder builder/arm wheel-outdoor gym equipment, upright exercise bike, excel parallel bars for gymnastics adjustable from 150 cm to 200 cm, ultrasound therapy unit, treatment couch /examination couch, intermittent lumber traction belts with bar

Corporations/Associations/Others

CTN :45637028

26 Jun, 2026 NA

Lonavala - Maharashtra

Tender For invitation of e-quotation for the procurement of open-gym equipment for all parks in lonavala city and for the supply of casting benches to various wards within the city. - open-gym equipments, surf boardtechnical specifications length :- 1850mm wdth :- 1100mm height :- 1690mmsafe area :- 3.07 x 2.32 meter surf board equipment made up of b class gi pipe of different nb. nb stands for nominal boar size i.e. internal diameter of pipe in millimeters. make of gi pipe will be of tata, jindal, and swastik. the main frame pipe is 80 nb of arc bend dia 1590 mm.handle frame is made up of 25 nb with radius of 740mm.handle support made up of 25 nb pipe.prime stand base are made up of ms round plate 250x8mm thk, prime stand base plate have round slot slots. welded to main frame with a triangular notch 75x50x5 mm thk. prime stand supporting bush is of dia 140mm.main paddle support bearing bush made of dia 140mm.pedal bearing bush support plate dia 130 x 60 bore x 8 mm thk.pedal is made up of 40 nb pipe with serpent shape of 3 bend, to avoid stress on pipe & increase bearing life, avoiding stress on bush.pedal movement restricted to 120 by specially designed mechanism.drum closed with dia 140 x 3 mm thk plate.to build bushes seamless pipe of od 70mm & 6mm thickness used.the pins used are made up of en-8 35mm.the bearings are used 6007-2rs1 permanent lubricated bearings. bearings are used reputed brand (skf/fag).the circlips a34 used for assembly., thi chi spinnerstechnical specifications length :- 1050mm width :- 850mmheight :-2000mm safe area :- 2.27 x 2.07 meterthi-chi spinner made up of b class gi pipe of different nb. nb stands for nominal boar size i.e. internal diameter of pipe in millimeters.make of gi pipe will be of tata, jindal, and swastik.the main frame pipe is made up of 50 nb with semi arc bend of r4.3 meter.prime stand base is made up of ms round plate 250x8mm thk, prime stand base plate have round slot holes, welded to main frame with a triangular notch 75x50x5mm thk supporting pipes welded to main frame size 40x40x2.5mm thk wheel connection link is 25 nb curve bend made up of b class of g.i. pipe.wheel of dia 450 mm gi plate with 1.2 mm thick with collar.wheel support is made up of 25x25 sq pipe which also welded to bush.to build bushes seamless pipe of od 60mm & 6 mm thickness used.the pins used are made up of en-8 25mm & 12mm. the bearings are used 6205 permanent lubricated bearings., leg press machine technical specificationslength :- 1760mm.width :- 1500mmheight :- 1420mmsafe area :- 2.96 x 2.7 meterleg press equipment made up of b class gi pipe of different nb. nb stands for nominal boar size i.e. internal diameter of pipe in millimeters.make of gi pipe will be of tata, jindal, and swastik.the main frame pipe is 80 nb with arc bend of r795mmprime stand base are made up of ms round plate 250x8mm thk, prime stand base plate have round slot holes. welded to main frame with a triangular notch 75x50x5 mm thkprime stand supporting bush is size of dia 140mm.main paddle support bearing bush is size of dia 140mm.drum closed with dia 140 x 3 mm thk plate.to build bushes seamless pipe of od 60mm.the pins used are made up of en-8 material 35mmthe bearings are used 6007-2rs1 permanent lubricated bearings.the circlips a-34 used for assemblypedal bearing bush support plate dia 125 x 60 bore x 8 mm thk plate pedal is made up of 40 nb pipe with serpent shape, to avoid stress on pipe & increase bearing life to avoiding stress on bush.pedal movement restricted to 120 by specially designed mechanism.the footrest frame is made up of 25 nb of b class of g.i. pipe with l shape bend.footrest support is made by 50x50x3mm ms square pipe. the footrest made from pc material of size 305x125x5 mm, & assemble with the support of 250x115x3mm thick ms plate., chest cum seated pullertechnical specifications length :- 2460mmwidth :- 970mm height :- 2270mmsafe area :- 3.68 x 2.19 meterchest cum seated puller equipment made up of b

CTN :45601898

09 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of rowing machine , treadmill machine , barbell , olympic barbell 50mm box rod , olympic barbell 50mm 3 ft rod , olympic barbell 50mm 4 ft ez rod , olympic barbell 50mm 4 ft rod , olympic barbell 50mm 6 ft rod , olympic barbell 50mm 7 ft rod , bumper plates 5 kg , bumper plates 7.5 kg , bumper plates 10 kg , bumper plates 15 kg , bumper plates 20 kg , bumper plates 25 kg , kettle bell 10 kg , kettle bell 12.5 kg , kettle bell 15 kg , flat bech , adjustable bench , leg press machine , 4 station multi gym abs bench lat pull butterfly and shoulder press , tyre flip 180 , functional trainer machine , biceps curl machine , plyo box , hyperextension bench , decline bench crunch , nylon rope , forearm machine

corporations/Associations/Others

CTN :45562275

29 Jun, 2026 4.30 Lacs

Hosur - Tamil Nadu

Tender For supplying and fixing of outdoor gym equipments ward no.36, in manjushree nagar park in hosur citymunicipal corporation - supplying and fixing of double arm strengthener 100x100 mm main pipe with four wheels and knobs on complete as per standard specifications, supplying and fixing of double shoulder strengthener with two big wheels including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of double flat walker 100x100 mm main pipe with four handles and anti skid pedal plates knobs including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of graded pull up bar 75x75 mm main pipe with 50mm handles with two heights including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of heavy horizontal bar 60 mm leg pipes and two 6 feet 50 mm hand pipe including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of double twister 75x75 mm main pipe with two anti skid 18mm metal checked plates with sealed bearing including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of health walker 100x100 mm main pipe with two legs in anti skid pedels mounted on sealed heavy duty bearing including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of dip bar 75x75 mm main pipe with 32mm pipe handle bar including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of fit gym set 75x75 mm main legs heavy main frame with 1 pair roman rings and a trapezoidal including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of double waist exercise equipments including cost and conveyance and fixing charges on complete as per standard specification

Leg Press Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Corporations/Associations/Others

corporations/Associations/Others