Latest lenders Tenders | Government lenders Tenders

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

CTN :42122286

22 Oct, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of custom bid for services - custom bid for services - annual maintenance contract for ground support equipment-work / schedule of requirement for maintenance, to be undertaken during period of amc, 1. adaptor maintenance stand pt no. 284557-1-1, 1.1, 1.2, 3.1, weekly inspection, 1.1.1 visually check the serviceability of item., 1.1.2 check cleanliness and husbandry state of the item., monthly inspection, 1.2.1 check visually condition of the item., 1.2.2 check condition of rubber beading., yearly inspection, 1.2.3 check item for operational condition., 1.2.4 painting of the item., 2. towing arm for dornier aircraft pt. no. misc-1512, 2.1 weekly inspection, 2.2, 2.1.1 visually check the serviceability of item., 2.1.2 check cleanliness and husbandry state of the item., 2.1.3 lubricate moving parts., 2.1.4 check the condition of wheel., monthly inspection, 2.2.1 clean and apply grease on moving parts., 2.2.2 check visually condition of the item., 2.2.3 check condition of wheel., 2.2.4 check condition of rubber beading., 2.3 yearly inspection, 2.3.1 check item for operational condition., 2.3.2 painting of the item, 3. nitrogen trolley with gauge pt. no. misc-5011, 3.1 daily inspection, 3.1.1 check for the general condition of the trolley., 3.1.2 check the n2 pressure available in bottle., 3.1.3 check for any static leak., 3.1.4 check all wheel for free rotation., 3.1.5 calibration of gauge when due., 3.2 weekly inspection, t 3.2.1 check the operational serviceability state of item., 3.2.2 check cleanliness and husbandry state of kit., 3.2.3 check for any leakage and erratic reading shown by pressure, gauges., 3.2.4 operate as per user manual and put appropriate label to indicate, the state., 3.2.5 check the condition of wheel., 3.2.6 check for pressure in cylinder and serviceability of gauges., 3.3 monthly inspection, 3.3.1 clean and apply grease on cylinder knob screw., 3.3.2 check visually the condition of hose., 3.3.3 test regulator for proper functioning., 3.4 yearly inspection, 3.4.1 check gauge for calibration, 3.4.2 check condition of wheel., 3.4.3 painting of whole unit., 3.4.4 calibration of hose., 4. jack adopter nlg pt no. u01a070000, 4.1 weekly inspection, 4.1.1 check cleanness and husbandry state of item., 4.1.2 check the serviceability state of item as per the user's manual., 4.2 yearly inspection, 7.1.1 painting of whole unit., 5. jack nose/main pt. no. vtej-3610, 5.1 daily inspection, 5.1.1 check the serviceability state of item as per the user's manual., 5.1.2 check for any signs of leak., 5.2 weekly inspection, 5.2.1 visually check the serviceability of the jack and wheels., 5.2.2 check cleanness and husbandry state of item., 5.2.3 lubricate the moving parts., 5.2.4 check the serviceability state of item as per the user's manual., 5.2.5 check the oil level port and plug., 5.3 monthly inspection, 5.3.1 replenishment of oil., 5.4 yearly inspection, 5.4.1 load testing (load testing is mandatory after, serviceability), 5.4.2 authority: - oem operation and maintenance manual., 6. jack tail pt. no. vaj-1.5/650, 6.1 daily inspection, major un6.1.1 check the serviceability state of item as per the user's manual., 6.1.2 check for any signs of leak., 6.2 weekly inspection, 6.2.1 visually check the serviceability of the jack and wheels., 6.2.2 check cleanness and husbandry state of item., 6.2.3 lubricate the moving parts., 6.2.4 check the serviceability state of item as per the user's manual., 6.2.5 check the oil level port and plug., 6.3 monthly inspection, 6.3.1 replenishment of oil., 6.4 yearly inspection, 6.4.1 load testing (load testing is mandatory after, serviceability), 6.4.2 authority: - oem operation and maintenance manual., 7. working platform engine pt. no. 63205a-000-000aoof, 7.1 weekly inspection, 7.1.1 visually check the serviceability of the item., 7.1.2 check cleanliness and husbandry state of item., 7.1.3 lubricate the moving parts., major un7.1.4 check the condition of the wheel along with the

CTN :42113470

10 Oct, 2025 NA

Sangli - Maharashtra

Tender For providing of customized amc/cmc for pre-owned products - supplying and testing set of anganwadi necessoy materials as per list and specification attached in scope work; na; comprehensive maintenance contract (cmc); not applicable; no - gas cylinder, double burner stove, regulator and hose, pressure cooker (5 liters), plate - 13 inch, bowl - 3 inch, pot (5 kg capacity), serving spoon, wooden spatula, glass (150 ml)

CTN :42077465

06 Oct, 2025 NA

Nagpur - Maharashtra

Tender For 2nd call e-tender for bmc towards work of maintenance of co2 flooding system, refilling of co2 gas hydrostatic pressure testing of cylinders at hvdc terminal station, chandrapur.estimated cost : limited to rs. 20,00,000/- (including all taxes)

Central Government/Public Sector

CTN :42074542

13 Oct, 2025 NA

Multi City - Multi State

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - testing of pressure relief valves; rated pressure and functionality testing; any firm having facility to complete the scope of work,testing service for on-board /commissioned equipment/ instrument related to plant - testing of pressure switches; rated pressure and functionality test; any firm having required facility to complete scope of work

State Government

CTN :41943708

06 Oct, 2025 NA

Mandsaur - Madhya Pradesh

Tender For corrigendum : enquiry for work of testing inspection / hydraulic testing of tools, tackles , pressure vessel and associated pipelines at etc at gandhisagar hps,mppgcl

State Government

CTN :42076004

21 Oct, 2025 NA

Multi City - Multi State

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - surendranagar pumping station; work of testing, examination, inspection and certification for lifting machines chain pulley blocks, lifting tackles, pressure hydro test ..

State Government

CTN :42055611

10 Oct, 2025 8.47 Lacs

Multi City - Karnataka

Tender For supply, replacement, retrofitting, testing and commissioning of 02 (two) sets of base mount, air-cooled, oil splash lubricated 40 kg/cm2 high pressure reciprocating air compressor with motor, control panel in complete at gerusoppa power house. as detailed in section-iii, technical specifications and scope of the work.

Central Government/Public Sector

CTN :42065992

06 Oct, 2025 NA

Pune - Maharashtra

Tender For tender for tender for appointment of lenders independent engineer (lie) for term loan from punjab national bank for mngl pune

State Government

CTN :42023084

17 Oct, 2025 24.64 Lacs

Tezpur - Assam

Tender For shifting of distribution system and installation of fhtc damage due to widening of pwd road at siporia batabari pwss under sopd-g for the year 2025-26 under tezpur division-ii, dhekiajuli - providing, laying, jointing, testing and commissioning of isi marked pe 63 grade, pn6 pressure rating high density polyethylene (hdpe) pipes suitable for drinking water supply conforming to is:4984-2016 (with up to date & latest ammenments at the time of execution) from manufacturer store including providing all necessary specials viz., bend, tee, enlarger/reducer, end plug etc. (matching with the prescribe grade & pressure rating same as to that of pipe) and including transportation of the pipes & specials upto work site including handling charges; lowering and laying of pipes & specials in line and level in trenches and/ or over supports ( minimum cover of pipe in trenches shall be 1 meter); jointing of pipes & required specials etc. by fusion welding; construction of required valve chamber and, hydraulic testing of the same (both pipes & specials), including providing all necessary labour & equipment etc., all complete, as directed and specified. 110 mm dia pipe, 90 mm dia pipe, providing functional household tap connection including earthwork in excavation for pipe line (both for connection in distribution line and service connection) and refillling, dressing etc., providing pvc/ hdpe saddle piece of average size 110 mm x 15mm(i.e. ranging from 63mm to 160mm), making holes in the distribution pipe, providing 15mm dia bronze ferrule cock (pn-16) conforming to is:2692 (1989) as ammended from time to time / flow control valve of ss316 with flow of 3 lpm at standard operating pressure of 0.5 bar to 1.5 bar of minimum weight 125gm, connecting it to the saddle piece, providing and fixing 3 layer (outer green / grey coloured middle black coloured uv stabilised and innermost layer white coloured with antimicrobial property) fusion welded pp-r ( poly propylene- random copolymer) pipes, sdr 7.4 having thermal stability for hot and cold water supply conforming is 15801-2008 of average length 10m from saddle piece to the standpost ( pipes of make empanelled manufacturers and pn-16 pipe, 20mm od, sdr-7.4) including all plain pp-r fittings and brass threaded pp-r fitting and clamping, cutting and making good to the damages, including all taxes and duties as applicable and including the cost of all required labour and materials as directed and specified. the item also includes construction and installation pf r.c.c hydrant pillar with cement concrete in proportion 1:2:4 sheathed in swr pipe of dia 100mm height 1200 mm encasing 15mm dia ppr pipe inside the hydrant, inclusive of cost of transportation to site and also supplying fitting and fixing pvc bib cock all complete as directed and specified. approved good for construction drawing will be issued by the deptt.

Lenders Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector

State Government