Latest lethoride sheet Tenders | Government lethoride sheet Tenders

CTN :45475418

15 Jun, 2026 NA

Batote - Jammu And Kashmir

Tender For rate contract for supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote for year 2026-27 or till the next year tender is finalized - supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote (per unit rate), super enameled aluminium wire swg-21 (isi mark) in exchange of scrap, super enameled aluminium wire swg-19 (isi mark) in exchange of scrap, super enameled aluminium wire swg-18 (isi mark) in exchange of scrap, super enameled aluminium wire swg-16 (isi mark) in exchange of scrap, super enameled aluminium wire swg-14 (isi mark) in exchange of scrap, super enameled aluminium wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-12 (isi mark) in exchange of scrap, super enameled copper wire swg-11 (isi mark) in exchange of scrap, aluminium strip for lt winding of sizes, copper strip for lt winding for 400 kva/630kva transformers 8/4 - 10/4.5, lt bush rod brass-complete 12 mm, lt bush rod brass-complete 20 mm, lt bush rod brass-complete 25 mm, lt bush rod brass-complete 30 mm, ht bush rod 12 mm brass for 11/0.440 kv transformer (complete), l.t bush for 11/0.440 kv transformer, 12 mm, l.t bush for 11/0.440 kv transformer, 20 mm, l.t bush for 11/0.440 kv transformer, 25 mm, l.t bush for 11/0.440 kv transformer, 30 mm, ht bush 12 mm for 11/0.440 kv transformer, butter paper, cotton tape 1 roll, rubberized cork sheet 4 mm thick 3x3, rubberized cork sheet 5 mm thick 3x3, cork strip 4mm, lethoride sheet, packing sheet 1mm & 1 mm, glass empire/glass sleeves 0-4mm, glass empire/glass sleeves 8-10mm, bakelite tubes of sizes (as per sample), packing gutties 1 ,1 , nuts and bolts for transformer of sizes, insulating varnish dr. beck, old cotton sarees/ waste, wooden wedges size, ht washers, lt washers m-20, lt washers m-25, lt washers m-12, ht bush clamps ( bimetallic, heavy duty), fevicol, transformer oil, three phase, 2 hp motor, filter paper pack 36 inch/3 feet, 2 kw heater 2.5 feet long, stainless steel type(u shape) tubular finned oven heating element, thermostat rotational type, contactor ml-2, 3-phase motor 1.5 hp, filter packs 2 feet micro, thermostat 0-110, indicator (ryb) big, sproket set 92x25x25, sproket 25, single teeth, chain 10 feet (big), 1/2, chain 10 feet (big), 3/4, chain small 10 feet, 1/2, chain small 10 feet, 3/4, hose pipe, 1 inch, electronic weighing machine (capacity 10kg), electronic weighing machine (capacity 200kg), electric chain pulley 3 ton, electric chain pulley 5 ton with remote, contactor ml-4, steel washer for transformer-as per sample, ms clamping ring-as per sample, m-seal

CTN :45441086

18 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of general electric goods - supply of switch gear/fuses, bch, techinc, schneider havells make, supply of switch gears, bch, techinc, schneider havells make, supply of copper & aluminum lugs/tools and dies, dowells make, supply of switch gear/fuses, schneider havells hpl make, supply of gears/change overs/mcb s etc, schneider havells hpl make, supply of lamps/flourescent tubs/cfl/luminaries/fitting blasts etc, surya , heavells philips, r.r., gold medal, supply of ac/dc/meters; ct s etc, ae make, supply of ocb s/resistance box spares, ae make, (a) insulating items- insulating varnish elmoluth.-1, isi/iso standard , beck tol red 1 kg. pack, isi/iso standard, thinner for beck tol red, 1 litre tin, isi/iso standard, p.v.c. tape x 10 meters steel grip in red, yellow, blue&black colour,isi/iso standard, empire tape 1 x 50 meters, isi/iso standard, glass tape 1 x 50 meters, isi/iso standard, cotton " " " , isi/iso standard, film insulation sheet 10 mm, isi/iso standard, lethoride sheet 10 mm, isi/iso standard, glass sleeve 1.5 mm. (1 mtr. long) isi/iso standard, glass sleeve 3.0 mm. isi/iso standard, glass sleeve 5.0 mm., isi/iso standard, do 8mm. isi/iso standard, do 10mm. isi/iso standard, do 12mm. isi/iso standard, hylam tube dia 3/8 thickness 2 mm., 1 mtr. long, isi/iso standard, hylam tube dia - do - isi/iso standard, crimple paper isi/iso standard, backelite sheet 20 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 25 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 1.5 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 3 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 13 mm. x 1 mtr. x 1 mtr. isi/iso standard, fibre backelite rod 2 x 1 feet. isi/iso standard, (b)terminal plates & fans for motors -terminal plates for 40 h.p. motor. isi/iso standard, do 125 h.p. motor. isi/iso standard, do 75 h.p. isi/iso standard, do 60 h.p. isi/iso standard, do 15 h.p. isi/iso standard, do 05 h.p. isi/iso standard, do for four speed ng 700 centrifugal machine. isi/iso standard, (c) aluminum fan for 75 h.p. vertical motor. isi/iso standard , do 60 h.p. isi/iso standard, do 25 h.p. isi/iso standard, do 15 h.p. isi/iso standard, do 05 h.p. isi/iso standard, (d) plastic fan plastic fan for k.h.-160, 25 h.p. isi/iso standard , do 10 h.p. isi/iso standard, do 5 h.p. isi/iso standard, (e) lighting accessories side holder for tube light, isi/iso standard , tube light strator, isi/iso standard, halogen holder, isi/iso standard, s.c. holder for 100 watt bulb isi/iso standard, -do- 300 watt isi/iso standard, s.c. holder for m.v. fitting 400 watts, isi/iso standard, hand lamp complete, isi/iso standard, pendent holder, isi/iso standard, tumbler switch 15 amp. surface type, isi/iso standard, -do- 5 amp. isi/iso standard, socket 3 pin - do - isi/iso standard, -do- 5 amp. isi/iso standard, wooden board 10 x 12 . isi/iso standard, m.c.b. box 2 ways/4 way. isi/iso standard, 10ways/12ways isi/iso standard, glass fuse 6 amps. isi/iso standard, glass fuse 8 amps. isi/iso standard, glass fuse 10 amps. isi/iso standard, (f)1- excitation coil for 40 h.p. isi/iso standard, 50 h.p, isi/iso standard, electronic controller for 50 h.p.dynodrive motor, isi/iso standard, assembly with t.g. coil dynodrive 50 h.p, isi/iso standard, mannual controler for 50 h.p, isi/iso standard, solonoid coil k-593-712 240 volt. for ng-700 c/f machine, isi/iso standard, do but for 1. ton. c/f machine, isi/iso standard, base mounting type synchronous timer e.m.1000 isi/iso standard, -do- 3 - 60 sec. isi/iso standard, -do- 0.15 - 3 min. isi/iso standard, (one instantaneous + 2 delay contacts) isi/iso standard, flush mounting type synchronous time e.m.1000, isi/iso standard, do 3 60 sec. isi/iso standard, do 0.15 3 minutes. isi/iso standard, (one instantaneous + 2 delay contacts) isi/iso standard, push button element 1nc. isi/iso standard, -do- 1 no. isi/iso standard, -do- push button without element. isi/iso standard, -do- selector switch, 2way (on-off) isi/iso standard, -do- selector switch, 3way (o

Central Government/Public Sector

CTN :45393547

17 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of leather bellow for medha traction motor as per drawing no. wr/mx/el-2020 4-poh-tmc-002. all reference item-1,2,3,4,5,6,7,8,9 with quantity [ warranty period: 30 months after the date of delivery ] ]

CTN :45395583

20 Jul, 2026 NA

Patiala - Punjab

Tender For supply of set of leather bellow with mounting arrangement and hardware to set list no. el 29940436 (rev.-02) rdso spec. no. spec/e-7/06 (rev.-2) clw drg no.1209-01.018.024 alt-1 and str clw/2022/eldo/m/str/145 rev.-0. note: all hardwares items to be procured from clw approved sources only. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45339257

29 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of leather bellow with mounting arrangement and hardware in a set for wag-9hc/wap-7 to clw drg.no.1209-01.018-024 alt-1 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45336331

23 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of leather bellow as per drg. no. wr/mx/el-2014/3-poh-tmc-001 item no. 1,2 & 3 as per drg.no. wr/mx/el-2014/3-poh-tmc-001 as per specn. - [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45190381

08 Jun, 2026 14.90 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : procurement of spares for sadc damper actuator, installed at 210 mw atps, mppgcl, chachai - for sadc actuators type : a0404112214 , sadc actuator assembly(model-a0404112214) consists of:- accessories- 04’’x04’’ cylinder, pneumatic double acting class-1 positioner fitted with 04 pressure gauge of 40mm dial, double acting alr, air filter regulator, ss tubing, fork with pin. , class-1 pneumatic double acting positioner with accessories:- manifold assembly, 04 connectors, 40mm dial pressure gauges, crank lever assembly and feedback lever etc. , pneumatic double acting positioner with in built non contact type hall sensor operated pft only , seal kit for class 1 positioner(seal, gasket and o-rings) , sleeve & spool assembly complete with 12mm o-ring for class – 1 positioner , leather bellow with clamp & nut bolt for sadc power cylinder , diaphragm assembly with seal, gasket & o-ring set for class -1 positioner , double acting air lock relay port size 1/8 inch npt (f) , main spring holder assembly for class -1 positioner , crank lever assembly mounted on cover-a base plate of class-1 positioner , double acting aluminium manifold assembly with sleeve & spool & “o ring” , feedback lever complete assembly with nuts and spring washer , o-rings & seal kit for sadc power cylinder , crank assembly sealed zz type bearing , anodised, zinc plate fork for sadc cylinder , fork pin for coupling cylinder with damper

CTN :45254647

10 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of leather bellow with collar.as per drg.no. wj-8/m alt-2, [mat. specn.- as per drg.]. make - indigenous. [ warranty period: 30 months after the date of delivery ] ]

CTN :45255381

09 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of leather bellow with collar.as per drg.no. wj-8/m alt-2, [mat. specn.- as per drg.]. make - indigenous. [ warranty period: 30 months after the date of delivery ] ]

CTN :45026690

03 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of modified single duct leather bellow for traction motor of wag9 & wap7 loco as per clws drg. no.- 1209-01.018-029 (alt.-2). set consists of type-i= 02 nos. & type-ii= 04 nos. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Lethoride Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government