Latest leukoreduction filter Tenders | Government leukoreduction filter Tenders

corporations/Associations/Others

CTN :44047533

10 Jun, 2026 88.81 Lacs

Faridabad - Haryana

Tender For bid to ras corrigendum : supply of arthroplasty implants and casting materials c c - revision total knee replacemen , bipolar modular arthroplasty , revision total hip replacement , cemented total hip replacement set , uncemented total hip replacement , dressing material 1 , dressing material 2 , dressing material 3 , dressing material 4 , dressing material 5 , dressing material 6 , dressing material 7

State Government

CTN :45231232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by th

State Government

CTN :45462730

20 Jun, 2026 NA

Vadodara - Gujarat

Tender For annual rate of hotmix material for various roads under rajpipla (r&b) division rajpipla (2026-27) - providing and laying premix semi dense bituminous concrete with b.t. aggregate as per morth gradation & using bitumen emulsion rs-1 as per is 8887: for tack coat @2.50 kg./10 sq.m. on bt surface with asphalt grade vg-30 for mixing @ 50.00 kg./m.t. including heating and mixing the aggregate and asphalt by continuous of batch mix plant and hot laid process laying with paver finisher and consolidation with roller as per morth specification to achieve desire density, including cost all materials equipments, tools and plants, oil, kerosene, firewood, labour charges etc. complete using contractor's own machineries batch mix plant and paver finisher etc. complete. plant and paver finisher etc. complete. providing and laying 50 mm thick bituminous macadam with b.t. aggregate as per morth specification and using bitumen emulsion rs-1 as per is 8887: for tack coat @2.50 kg. / 10 sq.m. on bt surface with mechanical sprayer and bulk asphalt vg 30 for mixing @ 34.00 kg./m.t. i.e. 3.40 percentage of total weight of mix including heating and mixing the aggregate and asphalt in continuous of drum mix plant and hot laid process spreading the same by paver finisher and consolidation with roller as per morth specification to achieve desire density, including providing all materials equipments, tools and plants, fire wood, oil, kerosene, labour charges etc. complete using contractor's own machinery drum mix plant and paver finisher etc. complete. providing & laying bituminous grout 37.5 mm thick compacted with asphalt of vg 30grade @ 1.99 percentage by weight of mix for mixing and 2.5 kg/10 sqm. of rapid curing emulsion for tack coat and using b.t. chips of required gradation including cleaning and heating asphalt premix materials by hot mix process in proper gradation and laying with sensor paver finisher and consolidation work as per most specifications including cost of materials labours labour equipment and plant fuel oil complete.... providing and laying 250mm thick wet mix macadam (w.m.m.) in two layers (each layer of 150mm avearge) using machine crushed black trap aggregate of 40 to 50 mm size in the material with water omc in mechanically mix (pug mill) carriage of mix material by contractor's 1.000 own tipper to site of work including laying, spreading and compacting in sub base, base course on well prepared under base of compacting as per most specification to achieve the desired density (mechanically providing & laying bituminous prime coat asphalt @ 7.5 kg / 10 sqm. of slow curing emulsion as per most specifications including cost of materials labours labour equipment etc. complete..... labour charges for spreading hotmix / drum mix material on scattered area of road by manually in regular shape including surface dressing with wire brush and spreading of sand including cost of sand. complete. (for patch work) labour charges for spreading hotmix / drum mix material by paver finisher including heating and spraying tackcoat as per requirement consolidation by static roller and spraying stone dust as directed etc. complete. providing and laying asphalt painting on b.t. surface with bitumen v.g. 30 at rate of 5 kg./10 sq.mt. and spreading stone dust on painting surface at the rate of 0.03 cu.mt. / 10 sq.mt. in selected length of the road including rolling and cost of asphalt. providing. laying built-up spray grout base course intwo layers with bitumen at rate of 15 kg./per 10 sq.m. with 0.50 cu.m. stone aggregate for first layer and 15kg. of bitumen and 0.50 cu.m. of stone aggregate per 10 sq.μ. of roadsurface for second layer and using 0.13cu.m. of key aggregate per 10 sq.m. excluding rolling and consolidation complete. (stone aggregate and bitumen shall be paid separately) surface dressing two coat with bitumen using 18kg.bitumen per 10.0 sq.m. with 0.15 cu.m. of stone chipping 12mm nominal size per 10.0 sq.m. for first coa

Central Government / Public Sector

CTN :45417356

17 Jun, 2026 10.30 Lacs

Panipat - Haryana

Tender For annual rate contract for supply and installation of electrical items and services at padc, panipat - electrical arc padc panipat 1st year, excavation of earth for cable / pipe laying for electrical work excavation of earth for cable trenches / laying of g.i. pipes for cable work in all types of soils including saturated soil upto a max. depth of 1.5 metres including shoring, strutting and bailing out of water (if necessary), backfilling and compacting in layers not exceeding 20 cm. thick to the finished ground level and disposal and dressing of excess earth within a lead of 50 metres all complete with labour and materials as per standards, drawings, specifications and directions of engineer-in-charge., 200 mm x 25 mm x 2 mm, supplying and fixing of gi route marker suppplying cable route marker with 10 cm x 10 cm x 5 mm thick gi plate with inscription thereon, bolted/ welded to 35 mm x 35 mm x 6 mm angle iron, 60cm long and fixing the same in ground as required. job includes painting with one coat of redoxide and finishing paint., 3 / 3.5 / 4 x 25 sqmm, 3 / 3.5 / 4 x 50 sqmm, 1.5 sqmm, 2.5 sqmm, 4 sqmm, 6 sqmm, 10 sqmm, 16 sqmm, 20 sqmm, 25 sqmm, 35 sqmm, 16 sqmm, 25 sqmm, 35 sqmm, 50 sqmm, 10.0 to 16.0 mm, 16 sq. mm, 65 mm dia 3 metre long, 25 x 5 mm gi strip, 64 kg charcoal and 5 kg salt, 100 amps., 63 a tpn 4 way, 5 to 32 amp, 40 amp, double pole, triple pole, triple pole and netural, four pole, 16 amps., 30 ma, 63 amps., 30 ma, 63 amps., 30 ma, 10 a spn. mcb industrial socket outlet supplying and fixing 10 amps., 240volts, spn industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 10 amps. c curve, sp,mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. note: isi marked sockets shall be used., 20 a spn. mcb industrial socket outlet supplying and fixing 20 amps., 240volts, spn industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps, c curve, sp,mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. note: isi marked sockets shall be used., 20 a tpn mcb industrial socket outlet supplying and fixing 20 amps., tpn, industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps, c curve, tp mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. note: isi marked sockets shall be used., 2 + 4 way, provide shock hazard chart supply and installation of shock hazard chart as per ie rules 1956 (clause-44) complete with frame and glass including necessary clamps, bolts, rawl plugs, etc. breachking and making good the wall if required. all complete with labour and materials as per the direction of engineer-in-charge., provide caution board at sub-station supply and installation of "caution boards" mv-200 mm x 150 mm / hv- 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.at sub-stations as per is2551/upto date including supply of necessary clamps, nuts, bolts and other hardware. all complete with labour and materials as per the direction of the engineer-in-charge, upto 5.5kw, plug- 2 pole+ earth, 250v- 20 amp, plug- 3 pole+ earth, 440v- 20 amp, red / yellow / amber / green / milky white leds, blue led, 1 way 5 / 6 amps. piano type switch with isi mark, 1 way 15 / 16 amps. piano type switch with isi mark, 2 pins 5 / 6 amps. penta flush socket outlet, 3 pins 5 / 6 amps. penta flush socket outlet, piano type 5 pins 5 / 6 amps. socket outlet, 3 pins flush type 15 / 16 amps. socket outlet, flush type 6 pins 6 / 16 amps. uni. socket outlet with isi mark,

CTN :45175873

10 Jun, 2026 NA

Nadia - West Bengal

Tender For corrigendum : supply of hydrofiber with ionic silver dressing materials e e - sterile wound dressing , adhesive four layer foam , hydrofiber material dressings , hydrofiber material rope dressings , hydrofiber material

CTN :44994674

08 Jun, 2026 63.13 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : the work for removing transportation of silt sludge weeds other foreign materials from sludge pond 2 and surface dressing of ground around guard sludge pond area at sstps, rvunl, suratgarh.

CTN :44994544

08 Jun, 2026 63.13 Lacs

Multi City - Rajasthan

Tender For corrigendum : the work for removing transportation of silt sludge weeds and other foreign materials from sludge pond-2 and surface dressing of ground around guard sludge pond area at sstps, rvunl, suratgarh

Central Government And Public Sector

CTN :45364730

29 Jun, 2026 NA

Gandhidham - Gujarat

Tender For providing quarry material& laying & spreding for kandla & veera area -eoi - providing primary rock of 0.1 to 0.5t for road work/ground including cost of quarrying, royalty, loading, unloading, transportation and spreading in layers from existing ground to required level, levelling, dressing side slopes etc., complete with all labour and materials complete including settlement etc., as directed by the engineer in charge. level ( 200 to 300 mm layers) , supplying and stacking of quarry spall /granular material for embankment of approach roads/plot with including cost of excavation, royalty, loading, unloading transportation complete with all labour and materials or as directed by engineer in charg , laying, spreading, compacting and shifting of quarry spalls material with loading, unloading and transporting. the material shall be spread in uniform thickness and compacted in layers using vibratory rollers of 8-10 capacity with watering to achieve proper grade and camber. the work shall include consolidation to meet specified compaction values and surface accuracy, complete in all respects as directed by the eic( 200 mm to 300 mm layer wise)

CTN :45361271

01 Jun, 2026 NA

Dumka - Jharkhand

Tender For purchase of equipment/materials/medicines bleching powder , phenyl , cotton roll , bandage (15cm x 5 mtr.) , gauge (15cm x 5 mtr.) , mc lotion , sprit (500ml) , povidone iodine ointment cream , povidone iodine lotion (500ml) , disposable syring (10ml) , disposable syring (5ml) , disposable syring (3ml) , disposable syring (2ml) , leucoplast roll , straight needle (round&cutting) , straight needle , inj metronidazole (100ml) , inj ceftriaxaone (1gm) , cap ampicillin (250 mg) , cap ampicillin (500 mg) , inj diclofenac (3ml) , syp paracetamol , inj gentamycin ip 2ml , inj ranitidine , tab cotrimoxazole ds , tab norfloxacin+tindazol , tab ciprofloxacin (500 mg) , tab ciprofloxacin (250 mg) , tab oflaxacin oz , tab metronidazol (400mg) , tab ciprofloxacin tz , tab pantaparazol (40 mg) , cough syrup , syp cetrizine , diclofenac gel , oral rehydration salts (ors) , tab cetrizine , hemaxil , inj perinorm/metroclofomide , inj a vil , tab a vil , inj clot , inj pollybine/b-complex , inj ondem , water for inj , inj tetvac , cap omeparazol (20mg) , tab omnacotril (5mg) , tab cough and cold , cipro eye/ear drop , ciprofloxacin saline (100 ml) , pain spray , iodex/pain balm , inj diazpem , syp metronnidazol+ofloxacin , syp norflox tz , tab aceclofenac , sil verax cream , tab ibu+pcm , sanitary pad , tab metformin (1000 mg) , tab metformin (500 mg) , tab glimpride (1 mg) , tab asprin , tab amlodipine , tab telmisartan 20/40/80mg tab , calciferol 60k softgel , tab flucanazole 150/200 mg tab , clotrimazole cream , sterile gloves no 6.5 , sterile gloves no 7.5 , tab salbutamol 2/4 mg tab , salbutamol inhaler , inj deriphylin , tab deriphylin , inj drotin , tab b12 , tab b6 , clotrimazole mouth paint , inj. adrenaline , inj atropine , inj mantol , inj atropin , ini calcium glucoante , inj lasix (frusemide) , inj pheniramine (avil) , inj sodium bicarbonate , inj paracetamol , inj diazepam , inj tranexamic acid , inj clot , loperamide cap/tab , phenytoine sodium amp , phenytoin sodium tab , silk protein based bilaminated sterile surgical wound dressing sheet , silk protein based bilaminated sterile surgical wound dressing sheet , silk protein derived bilamintaed sterile surgical meshed wound dressing , silk protein derived bilamintaed sterile surgical meshed wound dressing , silk protein based sterile soft, conformable surgical pu foam dressing , silk protein based sterile soft, conformable surgical pu foam dressing) , silk protein and chitosan composite non-absorbable haemostatic ribbon dressing , sterile oxidized regenerated cellulose based absorbable rapid hemostat in a structured non-woven made up with cryox technology format , sterile oxidized regenerated cellulose based absorbable hemostat in a structured non-woven format made up with cryox technology format , sterile oxidized regenerated cellulose based absorbable hemostat in a structured non-woven format made up with cryox technology format , sterile oxidized regenerated cellulose based absorbable hemostat in a structured non-woven format made up with cryox technology format , sterile, absorbable haemostatic dressing composed of oxidized regenerated cellulose (orc) in a knit fabric cryox technolgy format , sterile, absorbahle haemostatic dressing composed of oxidized regenerated cellulose (orc) in a knit fabric cryox technolgy format , sterile, absorbable haemostatic dressing composed of oxidized regenerated cellulose (orc) in a knit fabric cryox technolgy format , sterile, absorbable haemostatic dressing composed of oxidized regenerated cellulose (orc) in a knit fabric cryox technolgy format , sterile, absorbable haemostatic dressing composed of oxidized regenerated cellulose (orc) in a fibrillar , sterile, absorbable haemostatic dressing composed of oxidized regenerated cellulose (orc) in a fibrillar , sterile, absorbable haemostatic dressing composed of oxidized regenerated cellulose (orc) in a fibrillar , sterile, absorbable haemostatic dressing composed of oxidized regenerated cel

CTN :45354797

06 Jun, 2026 NA

Ahmednagar - Maharashtra

Tender For supply of lidocaine lignocaine hcl septodont 2 percentage with adrenaline epinephrine 1 east 80000 latex and methyl paraben free glass , trimcianalone 5 gm , anti septic mouth wash containing sodium flouride and triclosin bottle of 100 ml , post extraction alveolar dressing material , sodium hypochlorite 5 percentage hypochlor , chloroxylenol solution potassium hydroxide 13 point 6g chloroxylenol solution 50 point 5g oleic scid to 7 point 5ml cast , hydrogen peroxide solution with stabilizer ip 20 volume 500 ml bott , haemostatic sponge gelatin 80 mm long 50 mm broad 10 mm thick , gingival retraction cord roll of 100 to120 size 000 , disposable rvg sensor sleeves pkt of 1000 , plaster dental stone pkt of 1 kg , articulating paper , bone graft biphasic synthetic hydroxyapatite and beta tricalcium phosphate granules 0 point 5 to 1cc , biograft hydroxyapatite nano 0 point 5 to1cc , wire ss round hard 0 point 8 mm coil of 500 gm , wire ss round hard 0 point 6 mm coil of 500 gm , abrasive white acrylic fig 4 for straight hand piece , blasting materials aluminium oxide grain size 250u pkt of 500gm , base acrylic resin powder clear shade bott of 450 gm and acrylic resin liquid bott of 227 point 3 ml , sintered diamond burs for grinding metal for shp , cones polishing rubber black set of 3 , crown bridge metal np alloy for box of 1 kg , crown and bridge polishing compound for np alloy 200 gm cake , crown bridge separating liquid 500 to 1000ml , crown and bridge spacer die 20 to 30 ml bottle with thinner , crown and bridge wetting agent bottle of 1 litre , carbide cutter pointed medium grit size 60 for shp , carbide cutter flat fissure medium grit size 60 for straight hand piece , paper glass perforated fine 7 point 6 cm wide roll of 25 mtr sandpaper , self cure acrylic powder pink shade bott of 110gm with rapid repair liquid 110ml , self cure acrylic powder clear shade bottle of 110 gm with self ) /bid number : gem/2026/b/7571204 * /dated: 27-05-2026 & & / bid document 1 / 38 & & ' ' /item category cure acrylic liquid 110 ml , saw piercing blade for die cutting size 0 point 25 mm into 3 mm into 75 mm packet of 12 , wheel lathe white acrylic round edge coarse 76 point 2 into 6 point 3 mm , spray anaesthetic surface bott of 100 ml , arch wire ss preformed lower 0 point 016 round , niti close coil spring with eyelat pkt of 10 , arch wire niti copper preformed ideal uppper 0 point 016 roud , arch wire niti copper preformed ideal uppper 0 point 016into 0 point 016 square , arch wire niti copper preformed ideal uppper 0 point 016into0 point 022 rectangular , arch wire niti copper preformed ideal uppper 0 point 017into0 point 025 rectangular , arch wire niti copper preformed ideal uppper 0 point 019into0 point 025 rectangular , arch wire niti copper preformed ideal uppper 0 point 021into0 point 025 rectangular , universal self etch and bond bonding system sixth generation 1 to 2 bottles of 4 to 6 ml each with corresponding applicator tip , tma or cna straight length wire pkt of 10 pieces to 14 inches rectangular cross section 0 point 016 into 0 point 016 inches 0 pont 016 into 0 pont 022 inch , ss orthopedic expansion screw hyrax upper 9 mm , orthopedic expansion screw hyrax upper 11 mm , preformed molar bands upper l sizes from 34 to 40 in increments of 0 point 5 kit of 200 bands , pre adjusted bracket system set mbt with fdi numbering with bondable upper double and lower double first molar tube non convertible size 0 point 018 into 0 point 025 inches , preformed loop arch wire for retraction tma 24 to 42 , crimpable hook cross section 0 point 016 into 0 point 02 cross section 0 point 021 into 0 point 025 inch , niti expander size 32 mm or 34 mm or 36 mm or 38 mm or 40 mm or 42 mm , cotton wool absorbant pkt 500 gm , rolls absorbent cotton dental assorted sizes in box of 500 , sodium chloride solution isotonic in nontoxic dispoable plastic bottle of 500 ml //bid details 2 / 38

Leukoreduction Filter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

Central Government / Public Sector

Central Government And Public Sector