Latest level control valve Tenders | Government level control valve Tenders

State Government

CTN :45475453

10 Jun, 2026 3.00 Lacs

Kota - Rajasthan

Tender For supply of sanitary and joinery items to government quarters located in civil lines. - wire nails, coarse sand (zone iii), fine sand (zone iv), portland cement, oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges75x47x1.70 mm, chromium plated brass handles 125 mm with plate 175 x32 mm, chromium plated brass handles 100 mm with plate 150 x 32 mm, stainless steel butt hinges 125x64x1.9 mm is : 12817 marked, stainless steel butt hinges 100x58x1.9 mm is : 12817 marked, stainless steel butt hinges 75x47x1.8 mm is : 12817 marked, stainless steel butt hinges 50x37x1.5 mm is : 12817 marked, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel door latch 300x20x6 mm, oxidised mild steel door latch 250x20x6 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, glue, ms hold fast, white cement based putty, g.i. limpet washer, bitumen washer, g.i. plain washer thick, c.i. grating 100x100 mm, indian type white glazed vitreous china ist quality w.c. orissa pan size 580x440mm., brackets, low level flushing cistern of 10 litres capacity : pvc with pvc bend as per is : 7231, m.s. clamps, european type white glazed vitreous china ist quality w.c. pan, wvc (10 litres) low level flushing cistern cover only., g.i. tees (equal) 25 mm, g.i. union 15 mm nominal bore, vitreous china flat back wash basin size 510 mm x 440 mm, c.p. brass waste coupling 32 mm, magenatic catcher double strip horizontal type., mortice lock of approved make godrej or equivalent with pair of cp handles, almirah lock of approved make godrej or equivalent, ss waste coupling 125 mm, p.v.c waste pipe with c.p nut 32 mm, p.v.c waste pipe with pvc nut 32 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm)., hydraulic door closer bottle type m.s. body with necessary accessories and screws complete, 6 mm thick commercial ply, 9 mm thick commercial ply, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, flexible (coil shaped) pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 75 mm dia., u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 110 mm dia., upvc coupler for upvc drainage pipes 75 mm, upvc coupler for upvc drainage pipes 110 mm, upvc bend 87.5o 75 mm bend, upvc bend 87.5o 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass angle valve 15 mm, 15 mm ptmt bib cock, p.t.m.t. bib cock with nozzle 15mm, 15 mm ptmt bib cock long body with flange, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt ball cock 15mm complete with epoxy coated aluminium road & h.d. ball, ist qulality mat and glossy finished ceramic tiles size : 300mm x 450mm, ist quality heavy duty vitrified polished digital tile size:600mmx600 mm, ceramic mat finished tiles ist quality size 300 mm x 300 mm in white, gray, ivory, fume red brown, light green, light blue and other light shades, 15 mm nominal bore and 30 cm length pvc connection pipe with p.t.m.t. nuts, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, stainless steel screws 50 mm, stainless steel screws 40 mm, stainless steel screws 30 mm, stainless steel screws 20 mm, premium quality water closet seat cover solid pvc (isi marked) grade-i white for ewc, premium quality low level flushing cistern of 10 litres capacity pvc with pvc bend as per is : 7231, hydraulic seat cover for europeon wc, premium quality two way bib cock with wall flange, tooth paste & brush holder c.p. brass (heavy and superior quality.), stainless steel kitchen s

State Government

CTN :45478262

13 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate(including gst and cess) for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026-27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

CTN :45483287

19 Jun, 2026 NA

Lalitpur - Uttar Pradesh

Tender For supply of oil seal , bulb 12v 55w , pvc pipe dia 40 7401g , pipe assy , repair kit spring brake actuator t 20 24 , bearing ball annualar , chain silent , propeller sprocket hub , part kit brake chamber , t d poston , cam plate , nozzle , filter element , wiper gear , screen oil filter , valve comp float , gasket cylinder head , brake shoe front , brake shoe assy , tank water reserve , spring pad , rubber hose aux w tank to fill pipe

CTN :45223856

11 Jun, 2026 NA

Dhemaji - Assam

Tender For bid to ras corrigendum : supply of colon polycab , led bulb 9w open bracket make colon crompton , insulation tape open bracket make colon polycab , tc wire 10 sq mm open bracket make colon polycab , tc wire 16 sq mm open bracket make colon polycab , flexible pipe open bracket make colon polycab slash havells , magnetic screw 2 inch as approved sample , tank stand top plate for sintex as approved sample , tank nipple 25 mm open bracket make colon smfcslash apollo , float valve open bracket make colon smfcslash apollo , t socket 20 mm open bracket make colon smfcslash apollo , t socket 25 mm open bracket make colon smfcslash apollo , plain socket 20 mm open bracket make colon smfc slash apollo , elbow 20 mm open bracket make colon smfc slash apollo , elbow 25 mm open bracket make colon smfcslash apollo , union 20 mm open bracket make colon smfcslash apollo , union 25 mm open bracket make colon smfc slash apollo , ball valve 25 mm open bracket make colon smfc slash apollo , ball valve 20 mm open bracket make colon smfc slash apollo , flexible connector pipe 15 mm open bracket make colon smfc slash apollo , reducer 25 slash 20 mm open bracket make colon smfc slash apollo , water pipe clamp 25 mm open bracket make colon smfc slash apollo , flush tank open bracket make colon cera , wall tape plastic open bracket make colon smfc slash apollo , cpvc pipe 25 mm open bracket make colon smfc slash apollo , cpvc pipe 20 mm open bracket make colon smfcslash apollo slash supremeslash ashirvad close bracket , cpvc solvent cement open bracket make colon smfc , taflon tape open bracket make colon smfc slash apollo , shower open bracket make colon smfc slash apollo , floor drain cover 5 inch open bracket make colon smfc , pvc pipe 6 inch open bracket make colon smfc , pvc pipe 4 inch open bracket make colon smfc , pvc t socket 6 inch open bracket make colon smfc slash apollo slash supreme slash ashirvad close bracket , pvc t socket 4 inch open bracket make colon smfc , pvc l bend 6 inch open bracket make colon smfc , elbow brass 20 mm x 15 mm open bracket make colon smfc , fta open bracket make colon smfc , distember off white open bracket make colon nerolac , white paint open bracket make colon nerolac , og paint open bracket make colon nerolac , false ceiling 600 x 600 as approved sample , acrylic sheet 6 ft x 4 ft as approved sample , acrylic sheet 8 ft x 4 ft as approved sample , window jali 4 ft wiidth as approved sample , window tower bolt as approved sample , ms pipe 3 inch as approved sample , m seal as approved sample , silicon as approved sample , tripal 30 x 36 as appproved sample 230 gsm , cement open bracket open bracket make colon ambuja , sand as approved sample , agg 20 mm as approved sample , tmt bar 10 mm open bracket make colon tataslash steel , pcc block 600 x 200 200 as approved sample , putty as approved sample , thinner as approved sample , putty blade as approved sample , brush 2 inch as approved sample , brush 3 inch as approved sample , brush 4 inch as approved sample , roller as approved sample

CTN :45478360

29 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For tender for supply of misc em and br items - led flood light , led flood light , led 22 watt tube light , led slim panel , lt ug armoured cable xlpe , xlpe insulated with aluminum conductor , cable pvc aluminum conductor , pvc flexible copper conductor , mccb , mccb , mccb , mcb , mcb , mcb , mcb , gi pipe , heat shrinkable straight through joints kit , pvc flexible twin twisted copper conductor , butter fly valve , cp brass ball valve , gi plug , spun yarn , tape teflon , rawal plug pvc type , aluminium ferrule , cp bib cock , cp stop cock , pvc angle stop cock , wash basin , cp centre hole mixer , cp shower rose , cp sink cupling , float valve , gi socket , gi elbow , gi tee , gi nipple , gi nipple , gi union , pvc plug , gi socket reducer , glass pane , stainless steel tower bolt , stainless steel sliding door bolt , stainless steel door handle , lock for aluminium door , thiner , wire mesh , cp towel rail , rubber plug , soap case , hasps & staple , epdm rubber beading , pvc float valve , gi nipple , self screw

CTN :45472206

16 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of bathroom or toilet mirror (v3) (q4) , floor drain traps (v2) (q3) , towel rail (q3) , towel ring (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , gi elbow 25mm , gi elbow 40mm , gi elbow 50mm , gi elbow 80mm , gi elbow reducer 40x15mm , gi elbow reducer 40x25mm , gi nipple barrel 25x100mm long , gi nipple barrel 25x200mm long , gi pipe 25mm , gi pipe 40mm , gi plug 50mm , gi plug 80mm , gi socket 25mm , gi socket 40mm , gi socket 50mm , gi tee 25mm , gi union 25mm , gi union 40mm , gi union 50mm , gi union 80mm , non return valve 50mm , stainless steel connection pipe 450mm , stainless steel connection pipe 750mm , bathroom shelf chromium plated of sheet glass with bracket corner , bathroom shelf of ptmt with bracket rectangular , bombay nails 2 inch , bombay nails 3 inch , gi elbow 15mm , gi elbow 20mm , gi elbow reducer 20x15mm , gi elbow reducer 25x20mm , gi nipple barrel 15x100mm long , gi nipple for water tank 20mm , gi pipe 15mm , gi pipe 20mm , gi socket 15mm , gi socket 20mm , gi socket reducing 20x15mm , gi socket reducing 25x15mm , gi tee 15mm , gi tee 20mm , gi tee reducer 20x15mm , gi tee reducer 25x15mm , gi union 15mm , gi union 20mm , gi wiremesh of standard width each roll 15 mtrs , glass 3mm , handle 100mm long 8mm dia chrome plated , handles 100mm aluminium alloy, fabricated d type, anodised with base plate , handles 125mm aluminium alloy, fabricated d type, anodised with base plate , hasp and stapples 75mm , hydraulic door closer , iwc orissa pattern , kitchen plate rack rectangular stainless steel of size 24inchx24inchx10inch , kitchen sinks stainless steel 1mm thick overall size 915mm x 460 mm , kitchen sinks stainless steel 1mm thick overall size 495mm x 420mm , looking mirror 5.5 mm thickness of size 1220x457mm , looking mirror 5.5 mm thickness of size 760x380mm , m seal , mild steel wood screws 15mm, with slotted countersunk head , mild steel wood screws 20mm, with slotted countersunk head , mild steel wood screws 25mm, with slotted countersunk head , mild steel wood screws 35mm, with slotted countersunk head , nails 1inch , nails 1point5inch , nails 2inch , nails 3inch , oil putty for window glass fitting , peg set of six , plywood bwr grade 12mm thick 6feetx 3feet , plywood bwr grade 6mm thick 8feetx4feet , pvc connections 15mm size with ptmt nuts of length 450mm , pvc connections 15mm size with ptmt nuts of length 600mm , siphon kit for pvc flush tank , sliding door bolt 250mm aluminium alloy anodised with hasp staple bolt type , soap dish chromium plated , ss gratings for wash hand basin oblique sink 100mm , teflon tape , toilet seat open rim type european pattern 1 p trap , towel rack stainless steel , tower bolt 100mm aluminium anodised barrel , tower bolt 125mm aluminium anodised barrel , tower bolt 150mm aluminium anodised barrel , wash basin, vitreous china flat back or angle back type , waste pipe 32x750mm pvc , waste pipe 32x900mm pvc , waste pipe 40x750mm pvc , white cement , ball cock with rod and ball 15mm float valve , ball cock with rod and ball 20mm float valve , door seal , cpvc nipple for hdpe water tank 25mm , curtain rod 3 mtr length 25mm dia , curtain rod bracket and end caps , ewc seat cover plastic with fitting , floor door stopper 75mm, aluminium alloy body, anodised , flush pipe for pvc low level cistern , flushing cistem 10 ltrs low level pvc //bid details 2 / 81

CTN :45472524

17 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom or toilet mirror (v3) (q4) , main switch 100 amps tpn complete with hrc fuse , main switch 200 amps tpn complete with hrc fuse , mcb dp 10 amp , mcb sp 10 amp , mcb sp 16 amp , mcb dp 20 amp , mcb sp 20 amp , mcb fp 32 amp , mcb dp 32 amp , mcb spn 32 amp , mcb sp 32 amp , mcb tpn 32 amp , mcb tp 40 amp , mcb dp 40 amp , mcb sp 40 amp , mcb sp 6 amp , mcb fp 63 amp , mcb spn 63 amp , mcb tpn 63 amp , mccb 125 amp 3 pole 16ka , mccb 125 amp 4 pole 16ka , mccb 100 amp 4 pole 25ka , mccb 100 amp 3 pole 35ka , mccb 100 amp 4 pole 35ka , mccb 160 amp 3 pole 36ka , mccb 63 amp 3 pole 25ka , mccb 63 amp 4 pole 25ka , modular pvc box cover plate for 3 module cat no 30238wh , modular pvc box cover plate for 8 module cat no 30260wh , modular pvc box cover plate for 12 module cat no 20347 and 30271wh , modular pvc box cover plate for 4 module cat no 21292and 30249wh , modular pvc box cover plate for 6 module cat no 30511 and 30250wh , modular socket 5 pin 6 amp roma classic , modular socket 5 pin 16 amp roma classic , modular switch 6 amp one way roma classic , pin top 3 pin for 16 amp part no 38397 , pvc copper cable 1 core x 6 sqmm , pvc float valve 15mm ball cock with rod complete set , pvc float valve 20mm ball cock with rod complete set , pvc connection pipe 450mm with nut , pvc connection pipe 600mm with nut , pvc connection pipe 750mm with nut , pvc braided pipe 15mm x 660mm , float valve brass 15mm with complete set , mccb 125 amp 4 pole 25ka , mcb tp 63 amp , urinal waste pipe 900mm , pvc float valve 25mm with complete set , pvc float valve 40mm with complete set , gate valve 15mm , gate valve 20mm , gate valve 25mm , gate valve 40mm , gate valve 50mm , gi bend with socket 20mm , gi fitting bend gi scd with socket 15mm , gi fitting bend gi scd with socket 25mm , gi fitting elbow gi scd 15mm , gi fitting elbow gi scd 20mm , gi fitting elbow gi scd 25mm , gi fitting elbow gi scd 40mm , gi fitting elbow gi scd 50mm , gi fitting nipple barrel 15mm x 180mm , gi fitting nipple barrel 15mm x 200mm with socket , gi fitting nipple barrel 15mm x 300mm , gi fitting nipple barrel 25mm x 100mm , gi fitting nipple barrel 25mm x 15mm , gi fitting nipple barrel 25mm x 75mm , gi fitting nipple barrel gi scd 15 x 100mm , gi fitting nipple barrel gi scd 15 x 150mm , gi fitting nipple barrel gi scd 15 x 225mm , gi fitting nipple barrel gi scd 15 x 300mm , gi fitting nipple barrel gi scd 15 x 75mm , gi fitting nipple barrel gi scd 20 x 100mm , gi fitting nipple barrel gi scd 20 x 150mm , gi fitting nipple barrel gi scd 20 x 75mm , gi fitting nipple hexagonal gi 15mm , gi fitting nipple hexagonal gi 20mm , gi fitting nipple hexagonal gi 25mm , gi fitting plug gi scd 15mm , gi fitting plug gi scd 20mm , gi fitting plug gi scd 25mm , gi fitting plug gi scd 50mm , gi fitting socket gi 15mm , gi fitting socket gi 25mm , gi fitting socket gi 40mm , gi fitting socket gi 50mm , gi fitting socket gi reducing 15 x 20mm , gi fitting socket gi reducing 15 x 25mm , gi fitting socket gi reducing 20 x 25mm , gi fitting tee equal gi 15mm , gi fitting tee equal gi 20mm , gi fitting tee equal gi 25mm , gi fitting tee reducing 20 x 15 x 20mm , gi fitting tee reducing 25 x 15 x 25mm , gi fitting tee reducing 25 x 20 x 25mm , gi fitting union socket gi 15mm , gi fitting union socket gi 20mm , gi fitting union socket gi 25mm , gi fitting union socket gi 40mm , gi fitting //bid details 2 / 66 union socket gi 50mm , kitchen sink wo drain ss size 610x460mm bowl depth 20mm

Central Government And Public Sector

CTN :45224746

13 Jun, 2026 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : supply of inlet lcf pre filter for pall make oil purifier ,model no- hnp075r3zcpenb, partno-hca082eos8z , inlet filter seal kit for pall make oil purifier, model no-hnp075r3zcpenb - part no. ur319skz , sentry final filter 12 micron for pall make oil sentry modelno-xpft55cpznbsp8300, partno- ue610as40z , outlet filter element 5 micron- part no. ue610ap40z , outlet filter element 25 micron for pall make oil purifier, model no-hnp075r3zcpenb,part no- ue610at40z , oil mist filter element. make- pall, part no- pfs1001zmh, for oil purification unit. , hnp075vacuum pump1 year service kit along with vacuum pump oil. pall partno-cg00517 plus hs82002. , vacuum pump coalescer element for pall make oil purifier, modelno- hnp075r3zcpenb, part no-cg00516 , outlet dp indicator- part no. rc861cz090zyt , fluid pump kit- part no. cg01778 , kit valve bypass- part no. cg01019 , air filter block indicator of pall make hnp022 oil purification machine, part no- hc0293d004 , 415v 50hz u5.70 motor- part no. cg02814 , fluid pump service kit- part no. cg01664 , vacuum gage for pall make oil purifier model no- hnp022r3zcpenbx167, partno-hs80115 , float switch assembly for pall make oil purifier, model no- hnp075r3zcpenb,part no-cg01668 , inlet lcf- part no. hc9600eos8z , outlet filter element 12 micron- part no. ue310as20z , outlet filter element 5 micron- part no. ue310ap20z , oil mist filter element of pall make hnp022 purification machine,fl04, part no-cg00791. , vaccum pump coalescer element , part no - hs80482 , make - pall , for oil purifier , vacuum pump service kit -1 year- part no. hs80492 , vaccum pump lubricating oil, part no- hs82002, make - pall, for fryquel oil purifier , fluid pump- part no. cg01012 , inlet relief valve- part no. cg01019 , vacuum pump- part no. cg01034 , fluid pump service kit of pall make hnp022 oil purification machine, part no-cg01025 , auxiliry conduct- part no. cg00888 , relay 01 02 for pall make oil purifier,model no- hnp022r3zcpenbx167, partno-cg01016 , vacuum vessel gasket for ms. pall make vacuum dehydration machine,model-hnp022,part number-hs72039 , filter seal kit- part no. h8304skz , vessel gasket- part no. cc40300 , inlet starainer- part no. hs76463 , check valve- part no. hs75018 , sentry pre filter 22 micron for pall make oil sentry, model no-xpft55cpznbsp8300,part no-hc8300fct16z , pre filter 25 micron- part no. hcy8300eoj16z , motorised ball valve -recirculation valve - part no. skr14456 , motor pump set oil transfer pump - part no. hs76459 , mechanical seal- part no. cg11001

CTN :45472551

16 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of 20 watt and 4 feet led emergency batten with battery , sofa cushion 22 inch x21 inch x4 inch with 32 density with cover , 80 watt led flood light rgb colour changing , gi pipe 15 mm medium grade 6mtr long , 40w led flood light rgb colour changing , plywood commercial 2400x1200x9mm thick mr grade , pvc internal flush kit with float and handle for low level flushing cistern , plywood one side teakface 2400x1200x9mm thick bwr grade , gi pipe 20 mm medium grade 6 mtr long , gi pipe 25mm dia, medium grade 6 mtr , wooden beading 2400mm x 18mm x 5 mm , decorative wall light 18 watt with threaded bulb , plywood one side teakface 2400x1200x4mm thick bwr grade , brass half round spindle for bib cock 15 mm , 25w led focus light , glass shelf assembly glass sheet, 450 x 125 mm size with chromium plated railing , pvc toilet seat cover white color , plywood commercial 2400x1200x6mm thick bwr grade , gi pipe 50mm dia, medium grade 6 mtr , gi pipe 40mm dia, medium grade 6 mtr , pvc pipe for sink or urinal 38 or 40 mm x 800 mm , partcial board one side teakface sheet 8 feet x4 feet x12mm , brass spindle for bib cock 15 mm , 75mm pvc pipe 6mtr long , plywood commercial 2400x1200x4mm thick mr grade , ptmt ball valve , 20 mm dia, isi marked , brass spindle for concealed stop cock 15 mm , 30w led flood light rgb colour chnaging , brass spindle for pillar cock 15 mm , ptmt ball valve, 15 mm dia, isi marked. , ms ordinary rat tail rod pattern springs of size 300mm incl roller and roller plate , copper sulphate crystal best quality , gi tank nipple 25 mm , lt line spacer 4 wire , synthetic enamel paint white , synthetic enamel paint black , pvc flush bend pipe 600mm for high level flushing cistern , gi union 25mm isi marked , ss 100mm long sliding door bolt with hasp and staple type , urinal waste pipe 40mm , door seal 1.2mtr long , varnish , washer pvc flushing cistern , ss 304 curtain pipe 6 mtr length , cp bracket for curtain rod 25mm , gi union 20mm isi marked , m-seal adhesive in 250 gm pack , ptmt floor grating, 125 mm dia. , pvc flush bend pipe for low level flushing cistern , mortice lock vertical type 200mm size, 6 lever for aluminium door , gi union 15mm isi marked , ptmt floor grating with hole for pvc waste pipe, 125 mm dia. , lt line spacer 2 wire , gi union 50mm isi marked , ss handles 150 mm long, fabricated type. , pvc swr bend suitable for 110 mm pipe , fevicol marine 1 kg pack , fully automatic star delta starter for 25 hp motor, 3 ph, 415 v , teflone tape 12 mm x 4 metre , synthetic enamel paint og , lt line spacer 3 wire , ready mix cement 25kg bag , pvc hard shoe suitable for charpoy ms tubing 38x38 mm , bakelite lamp holder 6 amps, angle or batten type , fasd starter for 12.5 hp motor, 3 ph, 415 v , gi elbow 15mm isi marked , gi socket 40mm isi marked , gi socket 15mm isi marked , ss 150mm long sliding door bolt with hasp and staple type 16 mm thick , paint red oxide , fan capacitor 2.5 mfd , 110mm pvc elbow , butt hinges with ms hinge pin, 100 mm size, aluminium anodised, b-21 type , tarpentine oil , gi tank nipple 20 mm , gi nipple 15x150mm made of medium grade gi pipe , gi tank nipple 15 mm made of medium grade gi pipe , gi socket 50mm isi marked , mirror for table dressing gents 380mmx760mmx4mm , ss screw 30mm packet of 100 screw , ss floor door stopper 140 mm long , ss barrel tower bolts 200 mm long of extruded section. , gi nipple 15x200mm made of medium grade gi pipe , butt hinges, 100 mm size, medium weight, cold rolled mild steel , grease for general purpose in 1 ltr pack , aluminum //bid details 2 / 152 anodised handles 150 mm long, fabricated type. , aluminium electrical terminal lugs 400sqmm , ss barrel tower bolts 150 mm long of extruded section bolt dia 12 mm , aluminium anodised sliding door bolts 300mm long, plate type 16 mm dia , ptmt floor grating, 100 mm dia. , aluminium anodised barrel tower bolts 150 mm long of extruded section bolt dia 12 mm , ss handles 200 mm long, fabricated type. , 40mm pvc el

Co-operative

CTN :45444048

20 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin

Level Control Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector

Co-operative