Latest level control valve Tenders | Government level control valve Tenders

Central Government/Public Sector

CTN :45545399

24 Jun, 2026 NA

Samastipur - Bihar

Tender For supply of stop valve hand wheel for tank wagons to irs drg. no. w/tf-2066, alt-1, & material cast iron conforming to is: 210-2009, grade: fg.200 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45532362

03 Jul, 2026 45.00 Lacs

Bhuj - Gujarat

Tender For certain repair to water supply distribution lines and other connected items at mil stn bhuj and gandhidham under ge (a) bhuj - taking up u/s ci /di/ac water main (incl all fitting) with spigot & socket /ms pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 400 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as specified and as directed., all as per item 1 above but 250 mm dia bore complete all as specified and as directed., all as per item 1 above but 200 mm dia bore complete all as specified and as directed., all as per item 1 above but 150 mm dia bore complete all as specified and as directed., all as per item 1 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 400 mm bore with spigot and socket end centrifugally cast class "k- 9" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 6 above but 250 mm dia bore complete all as specified and as directed., all as per item 6 above but 200 mm dia bore complete all as specified and as directed., all as per item 6 above but 150 mm dia bore complete all as specified and as directed., all as per item 6 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 200 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 11 above but 150 mm dia bore complete all as specified and as directed., all as per item 11 above but 100 mm dia bore complete all as specified and as directed., m&l di bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of the following size 250 upto 400 mm dia complete all as specified and as directed., all as per item 13 above but upto 80 to 200 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 100 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 150/200 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 250 to 400 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 80 to 200 mm bore complete all as specified and as directed., taking down carefully cast iron sluice valve of size 250 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 200 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 150 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 100 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass s

Central Government/Public Sector

CTN :45563112

20 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of cast iron gate valve

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45476810

22 Jun, 2026 NA

Hoigebazar - West Bengal

Tender For corrigendum : procurement of different types of galvanised iron pipe- elbow-galvanised iron pipe socket- ball valve -pvc foot valve for works contract as sub contract basis at howrah works

CTN :45541990

20 Jun, 2026 NA

Thanjavur - Tamil Nadu

Tender For procurement of kirloskar make cast iron gate valve

CTN :45503920

24 Jun, 2026 1.20 Lacs

Kota - Rajasthan

Tender For supply of gas item - safety pital/hose pipe 5 feet , regulator brass 1.5 inch , buffet jali 11x13 , rv burner three foot heavy , steel roti baking pan , steel spoons big/small , tea canoe steel , tea strainer big plastic/steel , tikdi , vasar big size , joint brass 01, 2.5, 3, 5 foot clip , isi marked big lighter , grinding wheel 24 inch black , topaz in churi , millet shoes 18 inch black , topaz in churi , millet shoes 14 inch black , topaz in churi , three feet burner drain , including wall drain , wall , bread grill , gas supply hose bundle , isi mark , regulator plastic small and big , 20 ft gas pipe ismarka , jointer , chakki patta 4 inch 24 feet , nut bolts number 10 to 30 , deal beat no. 4 to 20 iron and stone , mill shaft and pulley , 5 hp, 8 hp motor petal , hexa fame funner frame , hexa blade funner , tawa cable or roti maker , 24 invi chakki suraksha chaddar 10 feet , 24 inch chakki repeat 1/2 inch , pana spanner number 16 to 20 , nut bolts 20 nos. 6 inch , nut bolts 24 nos. 4 inch , sieve for cleaning wheat , electronic spice grinder sieve , fine, medium, coarse , mill rubber seal round , grinder strap clip , gas socket single pin with small nut , gas socket 3 pin , gas valve , long for furnace- , 90,110,150,180,185 , vasar of the big furnace , gas tape , furnace rubber seal , 4 hp electric masala grinder blade , vegetable cutting machine square blade 10 mm , vegetable cutting spare blade, spare cutter with plastic plate

CTN :45516488

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45516720

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45517078

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

Level Control Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector