Latest level controller Tenders | Government level controller Tenders

Central Government/Public Sector

CTN :45736156

07 Jul, 2026 NA

Kota - Rajasthan

Tender For supply of pressure gauge for d.a./lpg gas regulator, working pressure 0-2.5 kg/cm2, dial size 2 inch, with minimum 6 months warranty and valid calibration certificate from a government-approved/nabl- accredited laboratory. make: weldstar/esab/wika/ramco/techno or equivalent reputed brand. [ warranty period: 6 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45725358

20 Jul, 2026 NA

Katipala - Karnataka

Tender For tender for supply of laboratory consumables - bladder latex rubber-seamless, no-s, pinch cocks-hoffman's brass nickel plated, size: 18mm, aluminum foil,9mx30cmx10.smicron, ph indicator paper, universal, range:1-14, roll, vacuum grease, 50 gm tube, metroak 211, cotton roll 500 grm (packet), laboratory glass ware cleaning detergent neutral,5 ltr., whatman stnadard sheet,460 x 570mm, catno:1001918/sd f001wsso, merck: 10390013 in box of 500 sheet, whatman qunt.filter paper no.5 40, 11cm dia., cat.no.1540110, whatman qunt filter paper no.4 2, 15cm dia, cat.no.1442150, whatman qunt filter pape no.42, 11cm dia cat no 1442110, whatman qunt filter paper no1,15cm dia cat no 1441150, whatman qunt filter paper no.4 1,11cm dia, cat.nd 1441110, whatman qunt filter paper no4 0,15cm dia cat nd 1440150, whatman glass miro filter gf/y size 43mm, cat no 1825047 or equal pack of 100, whatman qualitative filter paper grace 2,120 mm dia, whatman glass micro filter 47mm catno 18218047,50 fofax c10,e-merex gf50/10428006,pkt. of 100 circles, whatman extr thimbles celluld se xsmmcat no.2800199, nylon membrane filter 0.22microns, 25mm dia, 100 nos/netcat no ny0225, membrane filter nylon 0.45microns 47mm dia, pack of 500 fisher no4sp 04700,cole farmer a02016-44, membrane filter millipore 45 microns, 25mm dia, haw p02500 (100 nos pet, cellulose nitrate filter, 5.0 micions 47 mm dia (pack of 1001, whatman 7195004 s&s or sartorious, cellinose nitrate membrane filtero 8mm 47mm dia in pack of 100 cmcles, cellulose acetate membrane fater paper, 0.2 um, 25 mm dia, cat no 1110 7025n, pit of 100, nylon membrane filter paper pour size o micron diameter:47 mmupack of 100, gridded surface membrane filtero 45mm white with blace gridded for microbiological analysis, p/n: 2355534 or equivalent, whatman g/c 1822-047 gmp 47mm 120m, syringe filter holder, 25mm p/n:16517-sortorius or equivalent, qualitative filter paper grade 4, dia 125mm whatman cat no:1004-125, glass fibre filter gf/a 13mm fit, whatman cat md 1820-8013, nitric acid 70%, 500 ml, hydrochloric acid-305,500 ml (trace metal grade) suprapure, merck cat no 1.00518-1000 equivalent

Central Government And Public Sector

CTN :45736604

13 Jul, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply, installation and demonstration of laboratory hot plate as per attached technical specification annexure-c. make- thermo fisher scientific, ika, velp scientifica, labtech or equivalent. [ warranty period: 24 months after the date of delivery ] ]

CTN :45622920

09 Jul, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : creda invites online bid for e-tender for standardization of rates (rate contract) for supply of “ac/dc universal submersible pump, ac/dc water level controller for maintenance of “solar dual pumping/drinking water system” with 05 years onsite warranty anywhere in the state of chhattisgarh from registered vendors (as per clause 9, page no. 10 section 01) of creda (manufacturer or dealer/distributor of concerned material’s manufacturer) with minimum 3 years track record in the field of manufacturing or supply of pumps, controllers.

corporations/Associations/Others

CTN :45700249

28 Jul, 2026 8.73 Lacs

Hoshangabad - Madhya Pradesh

Tender For procurement of different types of electronics and electrical spare parts for zld plant - cpu1214c dc/dc/relay,140/1000/2a, simatic s7-1200, digital i/o sm1233,1601/1600,160) 24vdc sink /source, sed relayza, sm1221 1601 24v dc sink/source, sm1221 bc,24v dc, janalog input sm 1230,4ai, analog input sm 1230, bai, hmi ktp700 basic 2nd genartion 7"tft, profini, miniature circuit breaker, miniature circuit breaker, switch mode power supply model-385), water level controller 7 liquid level controller sensor probe (cat no xmb10520000), tower lamp led, red, yellow, green with buzze, relay module, 8 channel, 10/0, 6 cooling fan (round), 6°fan filter pvc (round), door limit switch (ino-inc model 8ms-7, panel lamp 11w (white), terminal block (model:kut 2.5), end plate (model kpns), fuse terminal block model kudf 4ad), end clamp (model:scs), group marking carrier model sckn min), glass fuse (520), glass fuse (520), ilps green,led,22mm, push button red, 22mm, selector switch 2 position maintain type 22m, no element, miniature circuit breaker, water level controller 7 liquid level, controller sensor probe (cat no xmb10520000)

corporations/Associations/Others

CTN :45704657

28 Jul, 2026 NA

Hoshangabad - Madhya Pradesh

Tender For supply of cpu1214c dcdc relay 14di10do2ai , simatic s7 1200 digital , sm1221 16d1 24v dc sinksource , sm1221 8di 24v dc , analog input sm 1230 4ai , analog input sm 1230 8ai , hmi ktp700 basic 2nd genartion 7 tft , miniature circuit breaker , switch mode power supply model s8fs , water level controller 7 liquid , tower lamp led red yellow , relay module 8 channel 1c0 , 6 cooling fan round , 6 fan filter pvc round , door limit switch 1no 1nc model 8ms 7 , panel lamp 11w white , terminal block model kut 2 5 , end plate model kpns , fuse terminal block model kudf 4ad , end clamp model scs , group marking carrier model sckn mlh , glass fuse 5x20 , ilpb green led 22mm , push button red 22mm , selector switch 2 position , no element , water level controller 7 liquid level * /bid number : gem/2026/b/7659362 + /dated: 26-06-2026 ' ' / bid document 1 / 30

Central Government/Public Sector

CTN :45709701

06 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of led weather proof 40 w surface/pendant mounting led tube fitting complete with corrosion resistant dust and water proof unbreakable polycarbonate body off white finish, frosted pc diffuser for glare free uniform light, protection-ip65, constant current above isolated driver, input voltage range 140-270v ac 50hz single phase with higher voltage auto cut off, pf- 0.95, thd<10%, colour temp. 5700k-6500k, view angle ? 120 degree, output lumens- 100 lm/w, cri>75, mini. efficacy of driver 85%, short circuit and open circuit protection mini surge voltage - 1.5 kv, led lm80/is:16105 test report support the same, driver shall comply the performance and safety requirement as per iec:62384/is:16104 & iec/61347-2-/61347-2-13/is:15885-2-13 with test certificate of nabl accredited laboratory shall be submitted, light source- smd type, brand/make- engraved/embossed minimum rep. warranty 03 years. make- jaquar, surya, bajaj, havells or equivalent. [ warranty period: 36 months after the date of delivery ] ]

CTN :45676692

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of fire safety and fighting laboratory equipment for fts department - purchase of fire safety and fighting laboratory equipment for fts department, cleveland open cup (coc) apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hzsafety: overheat protection heat insulation, pensky-martens closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustableignition:pilot flame with automatic shutter mechanismtemperature measurement:thermometer or digital sensor (ip-28c or astm)digital temperature displaypower supply:230v ac, 50 hzsafety: over-temperature cut-off flame safety control

CTN :45676693

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For :purchase of chemistry laboratory equipment for basic engineering department - purchase of chemistry laboratory equipment for basic engineering department, hot plate: top plate material: cast iron ; plate size: minimum 8 inch diameter;power rating: 2000 w ; temperature range: ambient to 200 c minimumthermostatic temperature control: required; power supply: 220 240 v ac, 50 hz, ic regulated battery eliminator: ic regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., ammeter: dc (0 - 2 amp), voltmeter: dc voltmeter; range 10 v, analog, galvanometer: moving coil type, 30-0-30 scale, unbranded with bhel ; specification-sensitivity 0.143mm/v, water distillation unit: output capacity: 4 litres per hour (lph); ph value: 5.5 to 7.0 ; conductivity (raw water distillation):3.0 4.0 s/cm or less ; glassware material: borosilicate 3.3 glass (pyrex/duran equivalent); heating elements: silica-enclosed quartz heaters or chromium-plated element variants; power supply: 220 240 v ac,50 hz / 60 hz, single phase; automatic water level cut -off, electro analytical balance: load capacity: minimum 500 g; readability: 0.01 g; linearity: 0.02g; display: lcd/led; tare function: required; top pan type; power supply: 220 240 v; ac, 50 hz, electric bunsen burner: electrically operated, energy regulator/ control knob operating temperature 800 c ; body: stainless steel, power supply source: corded, electrically operated; energy regulator/ control knob, operating temperature 800 c ; body: stainless steel, power supply source: corded electric, supplied with a heavy-duty, heat-resistant, electric, supplied with a heavy-duty, heat -resistant, digital balance: weight 500g, accuracy 0.01g, top pan. tare function, caliberation- automatic external display type: led

CTN :45692458

15 Jul, 2026 75.91 Lacs

Panaji - Goa

Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosive coating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r

Level Controller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector