Latest level gauge scrap Tenders | Government level gauge scrap Tenders

Corporations/Associations/Others

CTN :45532288

30 Jun, 2026 15.30 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements ,eb board, play materials and name board works in rajagopal nagar park at ward no.51 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page no.105)

Corporations/Associations/Others

CTN :45532318

30 Jun, 2026 19.50 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements,eb board,play materials and name board works in tnhb p-iii park at ward no.33 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener 5 days 6 nos, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page n

State Government

CTN :45143851

25 Jun, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various precision measuring instruments for tmd at sikka tps. - insize-1118-150b digital vernier calipers, digital vernier calipers size - 0-300 mm mitutoyo make, vernier caliper "mitutoyo" make, size- 0- 300 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 180 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 280 mm, vernier dial 0.00 to 200 mm, dial vernier caliper: size: 300mm (l.c: 0.02mm/0.001) suitable to take inside, outside, depth and step precision measurements. dual reading scale (metric and inch). mfg. from hardened ss and satin finish., dial gauge: 0-5mm model no: 1044a, dial indicator plunger type with back lug suitable for magnetic base, height gauge etc. graduation: 0.01 mm, range: 0 mm - 5 mm, dial reading: 0-100, accuracy: 0.013 mm., extension rod, length 150 mm suitable for mitutoyo make dial indicator plunger, mitutoyo dial indicator 0.01mm to 10mm, dial gauge: 0-30 mm model no: 3052a-19, mitutoyo make dial gauge with magnetic stand: 0-10mm, magnetic stand order 70115, mitutoyo make magnetic stand,701, magnetic stand with flexible column, model:7012-10, magnetic stand model 7033 - 10, make mitutoyo, long stem 1 for mitutoyo make magnetic stand 7010, dia 12 mm bottom connector m8x1.25 length 300 mm, long stem 2for mitutoyo make magnetic stand 7010, dia 10 mm length 500 mm, insize telescopic inspection mirror size 32 mm, 360d rotation 500 mm long, adjustable ss handle, feeler guage 0.03 to 0.5mm (184-302s), make; - mitutoyo, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, feeler gauge: 0.01 - 1 mm, length - 300 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., feeler gauge: 0.01 - 1 mm, length - 600 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., measure tape 3 mtr long, measure tape 5 meter, measure tape 30 meter, freemans make measure tape 15 metre long, digital outside micrometer with large digital display. size: 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size: 25 - 50mm, resolution: 0.0001 mm., mitutoyo make outside micrometer, 0 to 25 mm, 102/217, outside micrometer size - 50-75 mm mitutoya make, outside micrometer size 75-100 mm, outside micrometer 0-150 model 104-135a, mitutoyo make insidemicrometer, range-25 to 50mm, model:141-105, inside micrometer range 50-500 mm lc-0.01mm, mitutoyo make depth micrometer, 00 to 150 mm, 129/116, mitutoyo make depth gauge, range 300 mm,530/119, bore guage 18-35 mm (511 - 701) make: - mitutoyo., bore guage 35-60 mm (511 - 701) make: - mitutoyo., digital bevel protector 150 mm (187-501), make: - mitutoyo, mitutoyo make thread pitch gauge up to 100mm, surface plate, granite as per is 8512-2:1990 size 600x600 mm with stand 755 mm

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

CTN :45543826

23 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of digital distometer make skadioo or bosch , speedo or odo meter for measuring of road distance , road depth gauge 6 inch 150mm dia , long probe heavy multipurpose temperature thermometer for road work make labart , electric bench griding wheel green silicon 150mm 80 grit , mortise chisel half inch make anant , smooth plane 04 inch make anant , smooth plane 10 inch make anant , cross pein hammer 300gm make taparia , firmer chisel 25mm make anant , chisel for carpenter 25mm make anant , glass cutter , screw driver both side make taparia , wiremesh cutter make taparia , center wall punch make taparia , mini hack saw frame with blade , cross pein hammer 100gm , carborunum stone 8 inch make universal , measuring tape 3mtr make hi speed , pincer 8 inch , hammer 300gm , hammer 400gm , box wrench heavy duty 14 inch make taparia , teflon tape , screw driver 12 inch plus make taparia , screw driver 12 inch minus make taparia , monkey wrench make taparia , adjustable wrench make taparia , nose plier make stanley or taparia , plier make stanley , pipe extractor , pipe wrench 10 inch make taparia , aluminium drill bit set 4mm to 10mm , hammer drill bit set 4mm to 5mm , spanner set 4mm to 20mm make taparia , nail punch make bosch * /bid number : gem/2026/b/7661755 + /dated: 13-06-2026 ' ' / bid document 1 / 30

State Government

CTN :45516075

22 Jun, 2026 6.90 Lacs

Ferozepur - Punjab

Tender For providing and supplying furniture in integrated public health lab at district hospital ferozepur civil works furniture - almirah 20 gauge sheet heavy duty made with ms sheet size 36x78x18 duly powder coated with multipurpose shelves, heavy lock superior quality, table size 6x3 made with 19 mm thick ply + 1mm sunmica with 1 side drawer and cabinet duly polished heavy locks with footrests, counter size 8x2 operate for 2 persons made with19 mm ply + 1mm sunmica with footrests and shelves for documents with one drawer for each person, waiting area chair 3 seater- supplying & placing three seater bench. the seat and back shall be made up of high quality cold rolled ms perforated sheet of 1.2mm thick, pressed and welded to form the shape. the seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. the armrest shall be made up of mild steel powder coated tube with 1.2mm thick. the base structure shall be supported by ms powder coated with 40-60 (dft). there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 440 10 mm(d) x 405 10 mm(h) from ground. overall height shall be = 775 10 mm, overall depth = 710 10 mm & overall width = 1765 10 mm., revolving chairs long back with tilt mechanism with arm rest(leather finished, hydraulic, with five castors, nickle polish base)

State Government

CTN :45524885

18 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For procurement of various precision measuring instruments. - materials - w/s shaper tools shaping tool, end mill cutter, accessory tool end mill cutter, carbide tips end mill cutter size , drill bit meteric taper shank , metric taper shank , hand tool drill bit with tapered shank , drill bit metric taper shank twist , meastool caliper inner , callipers/inner/outer inner, mitutoyo 12" digital vernier caliper, vernier , micro mtr outr , meastool micromtr outer , measuring tool stand magnetic mitutoyo, inside micrometers , flr gaug , measuring tool depth gauge range size, thread gauge metric ,dial gauge

Central Government / Public Sector

CTN :45527295

26 Jun, 2026 NA

Haldia - West Bengal

Tender For supply of 9040m26e28 depth gauge micrometer, make mitutyo 0-300mm , vernier depth gauge 0-300mm , vernier depth gauge 0-150mm,resolution 0.01mm base dim- 100 x 16mm , filler gauge,set,300mm,long , digital vernier caliper 0-300 mm, make mitutoyo , digital vernier caliper 0-150 mm, make mitutoyo , micrometer,outside,digital,0 - 150mm , digimatic outside micrometer 340-102, 150-300mm make mitutoyo , stand, dial, magnetic type 7010 , micrometer,depth gauge,0-300mm,resolution 0.001mm base dim- 101.6 x 16mm , compl. bearing puller kit , plier,vice grip , 40 piece tool set - taps, dies set

Central Government/Public Sector

CTN :44949153

13 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of engineering instrument box , vernier caliper digital 0- 200mm , vernier caliper digital 0-500mm , vernier caliper digital 0-600mm , measurement tape 5 meter- metal , measurement tape 10 meter- metal , digital outside micrometer 0-150 mm , digital outside micrometer 150-300 mm , pitch gauge m2 to m20 , digital height gauge 0- 600mm , digital inclinometer , stainless steel protractor 0- 180 degree , universal bevel protractor -stainless steel , digital depth gauge 12inch 0-300mm , digital depth gauge 24inch 0-500mm , spring caliper set 2 pieces - inside and outside 0-400mm , sprit level -30 cm

corporations/Associations/Others

CTN :45499128

01 Jul, 2026 NA

Gulbarga - Karnataka

Tender For supply of material addition silicon light body , impression trays- dentulous perforated , impression trays-dentulous rimlock perforated , impression trays-edentulous perforated , impression trays-edentulous rimlock perforated , inlay wax box , instrument tray plastic , instrument tray sheets , intraoral photographic mirror , investment liquid , investment material-packets , korsolex disinfectant 2 percent glutaraldehyde , lacron carver , lignocaine spray , local anaesthesia lignocaine hcl 2 percent with adrenaline 1 ratio 80000 , macintosh sheet , metal gauge , metal polishing cake , metallic suction tip , mixing gun for temporary crown material 10 ratio 1 ratio , modelling wax , monophase addition silicone impression material , mouth mask , mouth mirror with head and handle , mouth prop adult , needle holder , non eugenol zinc oxide impression paste , peeso reamer assorted , periosteal elevator , pkt carving set , plaster spatula-straight , plastic filling instrument , polishing buff , porcelain mixing jar , probe , protective eye glass , protemp - temporary crown and bridge material , pumice , ring liner , round condenser , rpd pattern wax , sandpaper , sandpaper mandrel , self cure resin pink liquid , self cure resin pink powder , separating media , shade guide vita , silane coupling agent , spatula - agate , spirit , sprue wax 2mm , steel hammer , sterilization indicator tape , sticky wax , straight artery forceps , surgical gown disposable , surgical scissors curved , surgical scissors straight , tissue paper , tooth coloured acrylic resin powder shade b , tooth coloured inlay wax , tooth moulding powder heat cure shade b , tooth moulding powder heat cure shade c , tooth preparation burs s0-21 , tooth preparation burs sf 13 , tooth preparation burs tf 12 , tooth preparation burs tr 13ef , tooth preparation burs tr13 , universal plier , universal tray adhesive , vaseline , vita gingival ceramic powder , wax knife , wax spatula , wire cutter , zinc oxide eugenol cement liquid , zinc oxide eugenol impression paste 3-o vicryl suture with reverse cutting needle, absorbable sterile fibrillar collagen wound filler hemostatic agent (2.5ml), acrylic polishing cake, agar agar, agar duplication flask, airortor lubricant spray, alginate, alloy - all metal, aluminium oxide powder , aluminium oxide powder , applicator tips (sticks), articulators hinge type, articulators mean value (three point), autoclavable self sealing sterilization pouches (90x260mm), beading wax, bone graft putty, boxing wax, bp blades no.15, bp handle number 3, bur holder box, ceramic building brush size 6, ceramic building brush size 8, ceramic buildup liquid, ceramic laminate depth orientation tooth preparation burs, ceramic opaque liquid, ceramic powder dentin[a2], chair side ceramic polishing kit, chair side metal polishing kit, cheatle forceps, cheek retractor large, cheek retractor small, clinical patient drapes (disposable), cotton roll 500gm, crucible, curved artery forceps, debubblizer , dental floss, dental plaster, dental stone, dental varsity flask no.9, denture adhesive powder, die cutting blades, die cutting saw, die hardener, die lubricant , die pins with sleeve, die seperator, die stone, disposable glass, disposable gloves[m], disposable gloves[s], enamel tray, fiber post assorted, flowable composite, fox plane, gates glidden assorted, gauze, pattern resin, gingival cord packer, gingival retraction cord 00 size, gingival retraction cord 000 size, glass slab, green cloth surgical gown (universal), green stone burs (torpedo shaped), greenstick compound, handwash, heat cure acrylic resin liquid, heat cure acrylic //bid details 2 / 110

Level Gauge Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors