Latest leveling instrument Tenders | Government leveling instrument Tenders

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45675246

07 Jul, 2026 5.87 Lacs

Amreli - Gujarat

Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)

CTN :45666967

04 Jul, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of civil lab equipments - equipments for lab, direct shear machine:standard compliance:the equipment shall conform to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size:60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assemblyproving ring with calibration charttwo dial gaugesloading weights and hangerporous stones (2 nos.)specimen cuttertool kit, auger boring (or) any boring -soil sampling apparatus: engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit), flow table test apparatus: dimensions and specifications as per is 9103, table top made from flat metal plate ,minimum thickness 1.5 mm, table top size:700 mm*700 mm ,with flatness tolerance of 1.5 mm.table top marked with: scribed cross at centre,lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top:16+_ 1kg table top base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface. minimizing bounce stop watch-digital -2 nos scale 1 mtr-2 nos mounting wooden platform 300 mm height amc for 3 years inclusive., drying oven:temperature range: ambient (room) up to 250 temperature control: digital pid controller / thermostat for accurate heating. prestogroupaccuracy: typically 1 2 c. chamber material: stainless steel inner chamber for durability and easy cleaning. air circulation: forced convection fan for uniform temperature. shelves: usually 2 3 adjustable shelves. power supply: single phase 220 230 v ac, 50 hz.

CTN :45653813

30 Jun, 2026 NA

Multi City - Telangana

Tender For procurement and supply of medical equipment for various dept. to government hospitals / institutions in telangana state under rate contract for a period of 2 years - fibrillating machine, miraq transit time flow measurement ttfm instrument to access coronary graft flow, cardio thoracic surgical instrument, minimally invasive coronary mic equipment, hand held doppler, vat equipment, holter monitoring system, electro convulsive therapy ect machine, psychological tests - 20 tests, ultrasonic nebulizer, spirometry, rigid thoracoscope - vats, video polysomnography

State Government

CTN :45377341

06 Jul, 2026 NA

Multi City - Telangana

Tender For corrigendum : tggenco-nshes- supply of certain tools and plants material at nshes, nagarjuna sagar.- surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 yes, master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 yes, hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 yes, feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s yes, barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) yes, hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re yes, grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 yes, hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 yes, cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h yes, corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 yes, crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 yes, bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia yes, 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g yes, motorised barrel pump 0.5 hp, 350 watts / single phasein built on- off switchmaximum discharge flow: 60-70 lpm, discharge pressure: 10 m water columnsuitable for 200-210 ltr barrel /50 ltr cansmaterial: stainless steel 316, pump tube length: 1250 mmsuction tube size: 44 mm diasuction tube length: 1250 mm, outlet size: 1 inch dia motorised barrel pump 0.5 hp, 350 watts / single phase in built on- off switch maximum discharge flow: 60-70 lpm, discharge pressure: 10 m water column suitable for 200-210 ltr barrel /50 ltr cans material: stainless steel 316, pump tube length: 1250 mm suction tube size: 44 mm dia suct

CTN :45354796

17 Jun, 2026 NA

Shekhapura - Bihar

Tender For bid to ras supply of bench top meter for measurement , electronic balance , benkelmen beam , centrifuge extractor , radar gun , deval abrasion value , ultra sonic pulse velocity instrument , torsion testing machine , spring material test , core cutting machine with drill bit , beam deflection appratus , strain gauge indicator , weight hanger , wind tunnel , open channel flume , friction loss along a pipe , minor losses in pipe appratus , reynolds apparatus , universal milling machine , mechanical press , resistance spot welding , welding hand shield , welding helmet , welding helmet auto darkening helmet , tool and cutter grinder machine , hydraulic hacksaw machine , gas cylinder filled with argon gas for tig welding , gas cylinder filled , crucibles set , pouring ladles , crucible tongs , slag spoons and skimmers set , indoor ducted chimney with furnace , moulding box , bernoulli theorem demonstration module , energy losses in pipes , fluid friction measurement , orifice and mouthpiece flow apparatus , orifice and venturi meter demonstrator , pitot tube apparatus , determine meta centric height , notch tank apparatus , determine density and viscosity of oil , determine critical reynolds number of tube , free and force vortex flow apparatus , impact of jets on vanes , palton turbine test rig , francis turbine test rig , kaplan turbine test rig , centrifugal pump test rig , reciprocating pump test rig , performance of a two stage reciprocating air compressor , air blower apparatus , heat transfer coefficient of composite wall apparatus , natural convection heat transfer apparatus