Latest lever arm Tenders | Government lever arm Tenders

Central Government/Public Sector

CTN :45743779

03 Jul, 2026 NA

Jhajha - Bihar

Tender For supply of connecting lever assly. to m/s. escorts drg. no. 3kb 4325( consisting of 07 items) of m/s escorts make parking brake system of emus/memus, m/s escorts drg./pt.no. and qty. required per set are mentioned as follows;- (1) desc.- lever-m/s escorts drg./pt. no.-3 kb 4322-qty./set 1 no. (2) lever arm- 4 kb 4323-2 nos. (3) pin-4 kb 4324- 1 no. (4) link- 4 kb 4321-2 nos. (5) split pin 5x 32- is:549 -4 nos. (6) plain washer 22 is: 2016-6 nos. (7) pin -4 kb 4374-1 no. escorts drg. no. 3kb4325 spec:escorts drg.no. 3kb4325. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45717001

13 Jul, 2026 5.61 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for satisfactory trial. , carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial. , to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial. , removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. , to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. , to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials. , work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory trial run , dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate reassembling the unit fitting it onto the mill , fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run , removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial. , manufacturing the bed for the s.r.c. and i.r.c. motor gear and conducting a satisfactory trial. , remove the worn out trpf headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. , fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. , a dismantling old columns beam channels etc. b manufacturing and installing new columns beam channels etc. , removing the old corroded platform and replacing it with a new one. , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 hp. , dismantling fabricating and erecting weak corroded pipe lines up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 inch and providing a satisfactory leak proof trial.

corporations/Associations/Others

CTN :45696580

08 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply, delivery, installation of one number dismantling joint along with replacement of worn out spare parts, testing and commissioning of 750 mm dia. pdv and other allied works of pump unit no. 5 at cwps-ii, grww. - supply, delivery, installation, testing andcommissioning of 700 mm dia ms dismantling joints., dismantling counter weight, lever, arm, hydraulic unit etc. and all other components of the hydraulic system one by one of 750 mm dia. pump discharge valve parts by parts sequentially and cautiously as per direction of the engineer-in-charge (eic) at grww., dismantling the 750 mm dia. pdv from the existing pipe-bay, installatio/fitting-fixing of barrel-piece/flange and lifting & keeping the same on the working platform sequentially and cautiously as per diretion of the eic at grww., to and fro transportation charges of 750 mm dia. pdv from grww to workshop including loading and unloading.., dismantling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of the eic at grww/workshop., supply, delivery and fitting-fixing of drive shaft of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of valve seal of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (ss 410) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (epdm rubber) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of stub bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of drive bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of clamping ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of end cover of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of o ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft pin of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of allen screw of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply,delivery and fitting-fixing of gland plate of 750 mm dia. pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft key of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., repairing the damaged portion of the hole for holding the bearing of 750 mm dia. pdv by deposting metal, boring, machining, grinding etc., all complete, as per original shape and size and direction of eic at grww.., re-aasembling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of eic at grww., performing of necessary hydro-testing of the disc and body of 750 mm dia. pdv as per direction of eic at grww., lowering from the working-bay, installation, fitting-fixing of 750 mm dia. pdv in the existing pipe-bay removing the existing barrel-piece/flanges as per direction of the eic at grww., re-assembling and re-fitting all the components of the hydraulic system like counter weight, lever, arm, hydraulic unit etc. with the existing 750 mm dia. pdv installed in the pipe-bay parts by parts sequentially and cautiously as per direction of the eic at grww., test run, operation and commissioning of the entire system of 750 mm dia. pdv as per direction of the eic at grww.

Central Government/Public Sector

CTN :45506167

25 Jun, 2026 NA

Sundergarh - Odisha

Tender For corrigendum : providing of custom bid for services - repair of cooler chute, fabrication & erection of z-beam, canopy

CTN :45631517

10 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For mechanical maintenance of equipments in converter shop, hmdp, lp bay,scrap yard and slag yard in sms-2- preventive maintenance of oxygen lance system in sms #2, preventive maintenance of tilt drive system charging and taping doors of converter in sms #2, preventive maintenance of slag cut off dev in sms #2, preventive maintenance of relining car and allied lining equipment, periodic inspection and testing of oxygen lance mechanism of converter in sms #2, periodic inspection of converter tilt drive sms#2 and attending minor points, preventive maintenance of hmdp equipment, preventive maintenance of equipment in aro rinsing station in converter shop of sms #2, preventive maintenance of slag pot transfi car in sms #2, preventive maintenance of scrap box trans car in sms 2, , preventive maintenance of ladle tilter, replacement of lance body, repair of lance body, shifting jam cutting, patch pipe welding and other minor repairs of lance assemblies in sms 2., replacement of oxygen/water hose of lance, replacement of carriage gear box, rope drum pulleys etc in lance drive mechanism slag cut off device of sms #2., repair and replacement of slag skirt segments in converters of sms #2, repair and replacement of radial heat shields on drive side and non drive side of converter in sms #2, repair and replacement brick retainer plates, tap hole dummy flanges providing anchors etc in converters of sms#2, repair of bottom rinsing system pipes tuers, hoses supporting structure etc in converters of sms #2, replacement of converter shell tap hole barrel shells of scrap chutes, ladle shells etc in sms #2, repair of slag pots in sms #2 by welding, replacement of gear boxes up to 350 kg weight in bulk material charging system of sms, replacement of gear boxes of 351 kg to 850 kg weight in bulk material charging system of sms #2, replacement of damaged parts and alignment of fluid coupling co 62a/co 67 a/co65a conveyors, replacement of pulley assemblies of sizes up to 500 mm in belt conveyors in sms #2, replacement of pulley assemblies of sizes 600 mm and above in belt conveyors in sms #2, repair of chutes replacement of steel chute liners etc in conveyor system, replacement of rubber or poly profane liners, replacement of pneumatic cylinders of clam shell gates.gas flaps.compensators and diversion gates etc of bulk material charging system of sms 2, replacement of damaged chutes (other than conveyor chutes) of bulk material and ferro alloy charging system of sms #2, replacement of assemblies like, pneumatically operated diversion gate/gas flap gas lock valve etc ein bulk material charging system of sms#2", replacement of gear boxes in sptchmdp car in sms #2, replacement of wheel assembly in sptc/hmdp car of sms #2, replacement of gear boxes in stc/platform car/hot metal ladle transfer cars of sms #2, replacement of wheel assemblies in stc-platform car hot metal ladle transfer cars of sms #2, replacement of rails in converter section of sms#2, repair of steel teeming ladle hot metal ladle in sms #2 before relining, carrying out miscellaneous mechanical maintennace jobs of type lin converter section of sms #2, carrying out miscellaneous mechanical maintennace jobs of type z in converter section of sms #2, carrying out miscellaneous mechanikal maintennace jobs of type 3 in converter section of sms #2, perkidic inspection of equipments in converter shop, isbh, slag yard, scrap yard and lp bay in sms#2, repair and replacement of technological structures in converter section of sms #2, requir and replacement of auto coupler fixing bracket in steel terming ladles, carrying out steam parging in ladle driers/heaters of sms 2

CTN :45601733

03 Jul, 2026 NA

Bagpat - Uttar Pradesh

Tender For tender for supply of lift sensor make- banner model no -s18uia , make banner , mill house battery for ups , 12v , 42ah , make amaron , donally chute sensor , model-k15002 k1-3015-bpkg/ni , make-efector , size-15mm , i-250ma , 36vdc , make efector , current transducer , double output , make sepi , donally chute sensor fiber plate- size- 1800mm x 250mm , make energy ventures , donally chute sensor fiber plate- size- 1800mm x 250mm make energy ventures , fibrizor vibration probe , model no.-hs420f0505001 , sr no.-401362 , make hansford sensor , lift indiactor , make-massibus , lc5296 , make massibus , pressure switch rang-0.2 bar to 6 bar make- switzer procss instrument pvt ltd , make switzer , temprature controller , make-selec , model- tc 544 , ssr drive-12vdc supply- 85 to 270vac make selec , profibus connector make - phoenix contact subcon-plus-profib/sc2-2708232-ce_000620 make phoenix contact subcon plus , battery for dcs c300 controller part no - cc-scmb02 make honeywell , dcs model ai / analog input 24 vdc module , part no - 51454472-175 , model no - 8c-paina1 , temp 0 to 60 c make honeywell , fuse- 2a , length , fuse- 100ma , length , fuse- 1a , fuse- 5a , fuse- 0.5a , solonide valve with coil -220 vac modal no -51404-10-sb , make rotex , solonide valve repair kit modal no -51404-10-sb boiling house cuntifugal machine , make rotex , solonide valve repair kit modal no - 3013-6-2g boiling house cuntifugal machine , make rotex , solonide valve with coil modal no - 3013-6-2g boiling house cuntifugal machine , make rotex , solonide valve with coil modal no - 3012-6-2g boiling house cuntifugal machine , make rotex , solonide valve repair kit modal no -3012-6-2g boiling house cuntifugal machine , make rotex , seal kit for sov , model no.svsn-300-4e1 , pressure-(2-8)bar , 3-120psi , make delvel , sov , model no.svsn-300-4e1 , pressure-(2-8)bar , 3-120psi , make delvel , vaccum gauge tester seal kit , model no.dt55 , range-710mmhg , make ravika , dead weight tester seal kit , model no.dw32 , range-400kgf/cf2 , make ravika , spare kit afr for control valves , max. pressure-1.0pa , max.temprature-60c , connector size-1/4 , npt , model-114sn-200m-m6ka-nb , make , shavo , spare kit for afr for condensor , max. pressure-1.0pa , max.temprature-60c , connector size-1/4 , model no.-ac20a-02g1b , make smc , solenoid vavle make- janatics , modal no-ds255sr61 pr , rang-2-10 bar , power supply- 220 vac , make janatics , clamp , model no. he1090828 , stitching machine solenoid valve repairing kit , make - smc modal no- sy5120-5l-01 , max pr.-0-7mpa , power supply - 24 vdc , make smc , stitching machine solenoid valve , make - smc modal no- sy5120-5l-01 , max pr.-0-7mpa , power supply - 24 vdc , make smc , load bucket bagging m/c cylinder repairing seal kit ( dai 40 a 12) modal no-a1204160 o-m , make janatics , bag clampbagging m/c cylinder repairing seal kit (9a63040) modal no-64050050 o-m , make janatics , bagging m/c cylinder repairing seal kit (a63050) modal no-64040050 o-m , make janatics , shutter assembly , sugar bagging m/c limit switch , model no - idca12-2-q , make ideal , sugar bagging machine load cell , make-sensortronics , cap -110kg 3.004mvn , make sensortronics , stitching machine proximity sensor datalogic , tfsa , model no.- tsp 18-300 pn , pnp , npn no , make datalogic , sugar bagging machine load bucket proximity sensor , pumn-188n1-80 , supply-6 to 40vdc npn , make autonix , smps output -24 vdc ( 2 a ) make- mean well , bag clamp rubber pad size - 260mmx40mmx20mm make hi-tech , rubber packing for load bucket , make hi-tech , load bucket bagging m/c cylinder ( dai 40 a 12) , model no.-a1204160 o-m , make janatics , bag clamp bagging m/c cylinder (9a63040) , model no.-64050050 o-m , make janatics , bagging m/c cylinder (a63050) , model no.-64040050 o-m , make janatics , stitching m/c cylinder , model no.-mbl 25x25v-jz950a , 17-a-w , make airtai , vacuum condenser jet & spray line pressure sensor , make - honeywell , model

CTN :45587858

02 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For providing of repair and overhauling service - repair of hydraulic press for packing brake chute; repair of hydraulic press for packing brake chute; yes; buyer premises

CTN :45570169

07 Jul, 2026 46.74 Lacs

Tehri Garhwal - Uttarakhand

Tender For civil repair work at various locations of chute spillway structures of tehri hpp

CTN :45587462

27 Jun, 2026 NA

Agra - Uttar Pradesh

Tender For supply of arm lock hinge lever , arm lock stoppers , rpav chasis , cf arm , vio dome , motor pod , led lens , gimabl arm stablizing mount , omni directional antenne assembly with housing set , 32 pin nav cam cable