Latest lever spring Tenders | Government lever spring Tenders

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

corporations/Associations/Others

CTN :45737996

10 Jul, 2026 5.73 Lacs

Bardhaman - West Bengal

Tender For supply of iwg 1002 sa 100e 125 , limit switch drive assembly , torque switch drive assembly , top bevel gear box , worm gear , clutch fork assy , warm shaft assy , red gear assembly , hollow drive shaft assembly , o ring set , ball bearing , oil seal set , hand wheel retainer , worm gear spares , spur gear spares , clutch fork assembly , circlip set , ball bearing spares for actuators , oil seal kit spares for actuator , limit switch counter gear , push button assembly , torque switch , return spring , declutch lever for actuator typesa60a90 , declutch tripping arm , compression spring auma * /bid number : gem/2026/b/7725109 + /dated: 30-06-2026 ' ' / bid document 1 / 28

CTN :45700286

15 Jul, 2026 NA

Ernakulam - Kerala

Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

CTN :43830945

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of brush , speed indicator , toothed belt , knob , carbon brush , commutator , screw lp type resi thermo w/o neck , carbon brush , sealing for cover , carbon brush , direct current contractor , ring oil guyidance , aux.contactor , switch yaxely type , toggle , push hood red , push hood white , torsion spring , push hood yellow (pressure hood) , lamp pilot , fuse link , plate indicating , copper segment (contact piece) , toothed belt pulley , clutch electromagnetic , cam circuit element , switch position , terminal strip , conductor rail connector , handle (toggle) , dc contractor 2 pole , al capacitor 10000uf 63v , resistor , magnetic coupling , main contact complete , solenoid valve , side wall compl.(right) , bearing , emergency hand lever , circuit breaker (2000 amp)

CTN :45739191

10 Jul, 2026 NA

Gurdaspur - Punjab

Tender For supply of air filter , oil filter , clutch plate assy , wiper blade assy , relay , ignition switch , brush set , pinion assy , rr wheel brg , brake shoe assy rear , brake returning spring , cushion rubber seal rr wheel , transistor regulator , assy propeller shaft , brake shoe spring , gear lever kit , crank key , oil seal gear axle , gasket oil pump , front oil seal , hub oil seal , flasher unit

CTN :45737626

30 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of gas spring lever as per drg. no. c/lhb-80/c without gas spring (item no-4). material-ss202 [ warranty period: 30 months after the date of delivery ] ]

CTN :45733158

08 Jul, 2026 NA

Multi City - Odisha

Tender For auction sale of others - lot no.- sse/cs/2026-27/15 desc. - (1) wag-9 lipped racer of wag9 loco - 20 nos. wt..=97.600kgs (2) hanger lever( kbil/ftil make)of wag-9 loco -72 nos. wt..= 907.200 kgs (3) wheel set guide of wag-9loco -15 nos. wt..= 361.500 kgs (4) wag -9 plain racer of wag9loco -20 nos.wt.. 76.200kgs (5) sets of cover of axle box of wag-9loco - 05 sets wt.. 657.500 kgs (6) gear case assembly of wag-9loco -10 nos. wt.. = 2097 kgs (7) torque arm of wag-9 loco - 10 nos. wt.. 241 kgs (8) axle box of wag-9 loco -20 nos. wt.. =2160 kgs (9) miscellaneous (pins ,bushes ,link, friction arm,fasteners, brake equalizers plate ,washers, cotter pins ,turnion,clevis,arm spring ,adjusting equipment ,spacer & tie bar ,equalizer, hanger inside & outside ,nut bolts , safety sling, threaded bolt ... etc) wt..= 1000 kgs total ferrous wt..= 7.598 mt

CTN :45589234

01 Jul, 2026 NA

Thiruvarur - Tamil Nadu

Tender For bid to ras providing of repair and overhauling service - spares for specialist vehicles against 23; spares for specialist vehicles against 23; yes; buyer premises - flow conrtol valve, pipe for lever, dog chain, butterfly valve, ball valve, hose nipple, nipple hex, valve, nipple, elbow, coupling, monitor seal kit, nozzle al, bonnet lock, u bolt, leak off pipe, tapper roller bearing, tapper roller bearing, banjo bolt, u bolt, thrust washer, olive clutch pipe, ball valve, hose, shock absorber, assy spring brake chamber, hand brake valve, assy clutch master, clutch slave clinder, assy mufler, rubber hose, rubber hose cooling water, washer, adaptor, adaptor, control valve

CTN :45419217

01 Jul, 2026 NA

Gwalior - Madhya Pradesh

Tender For bid to ras tender for supply of pvc bib cock , cp angle cock , pvc angle cock , pvc stop cock , cp pillar cock , pvc pillar cock , cp 2 way angle cock , pvc 2 way bib cock , cp waste coupling , pvc waste coupling , pvc shower rose , grating stainless steel , grating stainless steel , pvc connection , pvc connection , pvc waste pipe , float valve , plastic seat cover , pvc flushing kit , pvc lid , gi socket , gi socket , gi elbow , gi tee 15 mm , gi nipple 15x100mm , gi nipple 20x150mm , gi union 15mm , gi plug 20mm , gi socket reducer 15x20mm , gate valve 15mm , gate valve 20mm , plumber thread jute , glass pane plain , glass pane plain , glass pane black , putty oil for glass pane , floor spring , stainless steel tower bolt , ply wood 8x4x5mm , stainless steel door handle , butt hinges ms 75 mm , lock for aluminum door 4 lever , glass corner shelf , pvc corner shelf , toilet mirror , steel star screw , steel star screw , cp soap dish , cp toilet paper holder , cp spindle , rubber plug , nails , pcv self , bracket for curtain rod , aluminum glazing beading , floor paint , door stopper , cistern washer , switch socket combination , mccb , mcb , offload changeover switch , mcb , mcb , socket , fr pvc insulated unsheathed flexible wire copper conductor , ug cable armored , gland packing , aluminum lugs , aluminum lugs , lubricating grease , gi nipple , gt tee reducer , gi plug , gi socket reducer

CTN :45399878

06 Jul, 2026 45.56 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos., plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg., no. t-696-699 (1 set = 2 pair (4 fish plate, 8, nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso, no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg, for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:-, t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box, railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06, nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-, 090)(one setcomprise of 2 nos. fish plate & 4, nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt, with flat&spring washer size(16x50x38 )mm as, per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52, 60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06, nos.) railway drawing no.- t-4885- 86, t-4887-88, t-, 4889-90, rail dolly bg attachment for transportation of, prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-, 4902) and with psc sleepers (rt-4149) for max., gap =80 mm(in single gap), (fittings- plate screw,washer,nut bolt,m.s., bracket,c.i. chair,check rails,tongue, rails,stock rails,gap avoid rails,split pin etc., as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01, rh and 01 lh tounge rail length 12356 mm and s

Lever Spring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others