Latest lid handle Tenders | Government lid handle Tenders

CTN :40977917

16 Jul, 2025 NA

Multi City - Multi State

Tender For supply of dual brake valve , rep kit unloader valve , oil seal crank , part kit pressure regulator valve , banjo bolt , handle door inside catch , exhaust brake switch , kit master cyl assy , selector lever , wind shield glass

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

Central Government / Public Sector

CTN :40964728

18 Jul, 2025 NA

Panipat - Haryana

Tender For supply of bid schedule 1 9355250794 utensils , bid schedule 2 9355250804 canteen utensils list 7 , bid schedule 3 9355255624 canteen utensils list 1 , bid schedule 4 9355255644 canteen utensils list 2 , bid schedule 5 9355256084 canteen utensils list 3 , bid schedule 6 9355256934 canteen utensils list 4 , bid schedule 7 9355257604 canteen utensils list 5 , bid schedule 8 9355252204 water glass , bid schedule 9 9355254654 water jug steel w lid handle 2 lt

CTN :40704392

07 Jul, 2025 NA

Srinagar - Jammu And Kashmir

Tender For bid to ras supply of bowl oil filter element , oil seal (id 155.73.od 182.86 w 15.87 , hydraulic jack with handle 12 ton cap , seal front , horn assy low tone , spanner deac 19x22 , sash door rear rh , unloader valve , cover boot , screw set idle adjust , regulating glass rh , nut , rear protector bumper corner lh , gasket cyl head , assy hose , o ring distributor case , boot , o ring , assy of turn signal rh , nylon nut m8 , bearing angular (drive shaft) , selector shaft , door lock rear gate , assy engine lamp , wheel nut spanner , wooden scotches/block , crank shaft oil seal guide , universal joint assembler , spring brake actuator type 24 lh , yoke reverse shaft , rear axle remover , door operating handle mech right , valve intake , s/a of vane coolant pump , rectifier , bracket (battery cable)

CTN :40703166

07 Jul, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of commercial or mr plywood is 303 grade 8ft x 4ft x 4 mm , commercial mr plywood is 303 grade plywood 8ft x 4ft x 6 mm , commercial mr plywood is 303 grade 8ft x 4ft x 12 mm , commercial or mr plywood is 303 grade 8ft x 4ft x 18 mm , commercial or mr plywood is 303 grade 9ft x 6ft x 12 mm , waterproof or bwr plywood is 303 grade 7ft x3ftx12mm , commercial or bwr plywood is 303 grade 7ft x4ftx12mm , sunmica size 4ftx8ftx 1mm wood colour , sunmica size 4ftx8ftx 1mm black colour , sunmica size 4ftx8ft x 1mm white colour , 2nd class well seasoned hard wood scanting of size 1.5inch x 4inch x 7ft long , 2nd class well seasoned hard wood scanting of size 3inch x 2inch x 7ft long , 2nd class well seasoned hard wood scanting of size 2inchx3inch x12ft long , 2nd class well seasoned hard wood scanting of size 3inchx3inch x12ft long , 2nd class well seasoned hard wood planks of size 12inch x 1.5inch x 12ft long , 2nd class well seasoned hard wood planks of size 12inch x 1inch x 12ft long , 2nd class well seasoned hard wood scantling of size 4inchx3inchx12ft long , 2nd class well seasoned hard wood scantling of size 1.5inchx3inchx12ft long , 2nd class well seasoned hard wood scantling of size 1.5inchx4inchx12ft long , pre laminated particle board 8ft x 4ft x12 mm , pre laminated particle board 8ft x4ft x18mm , hard wood beeding 1.5inch x 0.50inch , moulded wood beeding 20 mm x 8 mm , pvc edge band tape 0.5 inch thick , pvc edge band tape 0.75 inch thick , countersunk flat head screw 0.50 length for acp panelling , countersunk flat head screw 1inch length for acp panelling , 3 m double sided tape , pvc gitti white 25 nos per box , silicone sealant for acp sheets , alumunium groove cutting blade 10 cm dia , masking tape 1inch width , drill bit 2mm for iron , drill bit 3mm for iron , drill bit 4mm for iron , drill bit 5mm for iron , drill bit 6mm for iron , screw driver 12inch , screw driver set star type , half chizel , hammer ball pin 400 gm , claw hammer 510 gm , iron wood planner 18inch , bosch 4inch 670 w angular grinder , carpenter edge 1.25 kg , bench vice 4inchx 8inch , wood work vice 7ft long , g clamp , hammering concrete bit 4 mm , hammering concrete bit 5 mm , hammering concrete bit 6 mm , hammering concrete bit 8 mm , hammering concrete bit 10 mm , hammering concrete bit 12 mm , blade 7inch for bosch eco circular saw blade gks 190 , blade tct circular 7inch dia circular saw blade for acrylic sheet cutting , 10inch dia circular saw blade , star screw driver kit , steel allen key set , hex driver power drill socket for self driven screw , check nut for sd screw , ibell gasoline chainsaw 56 cc magnesium alloy crank case 18inch guide bar length with chain , blade grinders essential machine , grinding wheel for blade grinder , bh2 screw dirver plus and minus bit , triangular file 4inch , half round file 12inch , right angle 12inch , steel measuring tape 3 m length , steel measuring tape 5 m length , steel measuring tape 15 m length , ft30 fiberglass top line measuring tape 30mtr , heatex , vacum handle for glass , bush for table dsize //bid details 2 / 50

Central Government And Public Sector

CTN :40922516

14 Jul, 2025 NA

Thane - Maharashtra

Tender For supply of spent fuel bundle lifting tool assembly for sfsb as per sketch-1 , spent fuel bundle lifting tool assembly for sfib-sfrb as per sketch-20 , frame as per sketch-3 , washer as per sketch-5 , adjusting spacer- 1 , locking handle as per sketch-9 , link-1 as per sketch-10 , bell crank-a as per sketch-11 , bell crank-b as per sketch-12 , link-2 as per sketch-13 , lifting claw as per sketch-14 , clevis pin-1 as per sketch-15 , clevis pin-2 as per sketch-16 , clevis pin-3 as per sketch-17 , operating link as per sketch-18 , adjusting spacer-1 as per sketch-19 , split pin 2.5 , hex nut m10 , hex nut m6 , hex hd screw , machined washer , split pin 1.6 , hex hd screw m8 , grub screw m4

CTN :40540968

09 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of flexible hose , pilot lamp red xb7ev04bpn , memory card 6es79548le030aa0 , backpane for plc 6es75901ab600aa0 , ai module 6e575317kf000ab0 , front connector 6es75921amoo0xb0 , di module , plate door interlock , terminal shroud , terminal block 283901 , terminal block 281901 , terminal block 280519 , terminal block 20023201 , multipin connector ms3102r2214s , multipin connector ms3106f2214p , panel light mtl2835150 , door limit switch 3se5122oya003se5000ae01 , terminal fuse with indication 281611281541 24v dc , fuse glass , teflon tape , vent valve , spacer seal housing , o ring 3912 , filter drier replacement core , bearing spacer , relay , shaft seal sea water pump , thrust bearing kit , gear set 64 33 xjf151n , valve 43 way , flex metal hose 113 , sea water pressure switch typ , oil temperature relay , delivery pressure gauge , thermostat rt 11 , flow switch , safety high and low pressure cutout , load break switch & fus , inset for valve with ratchet , auxiliary switch , auxiliary switchover , switch , auxiliary contactor block 2s 2o 1sov 1oov , auxiliary switch , starter , air contactor , motor protector , attachment adaptor , air contactor , safety relieve switch , measuring transducer 24vdc , fuse 500v , fuse 500v , fuse insert , fuse 500v , oil protection control diff pres cntr with bntime de swi , timing relay , timing relay , relay , transformer , sight glass set , fuse switch , fuse switch , fuse switch , freeze protection thermostat , switch , thermoregulating valve , nipple with coupling , press key , pilot lamp , pilot lamp , selector switch , expansion valve unit , pilot lamp , pilot lamp , selector switch key , lamp holder , pilot lamt white , slide valve indicating mechanism microprocessor , lock nut , o ring kit , pilot tube fitting , bleed valves , co2 cylinder interconnection pilot hoses , co2 cylinder head valves , main control panel , mimic panel , junction box type 1 , junction box type 2 , poddcv 25mm , mannual lever box assembly , zonal valve cabinet , push button epbs , pilot release cabinet , time delay unit , ss 304 tubing , capacity control solenoid valves tag nosv1 & sv2 , motor starter , fourpoint contact ball bearing , motor starter , thermometer , shaft seal chilled water pump , motor starter , crank shaft , valve plate set , bearing cap , bearing cap , shaft seal end bearing , seal lip , crankcase heater , schrader connection , oil pump complete , set of gaskets , shaft seal complete , solenoid valve oil return line , defrosting control sensor , discharge line thermometer 0120 c , fuse socket nh00 , contact auxiliary1no+1nc , contactor3p 440 vac 50 amp , spring compression , pin dowel , pin spring , key square 12x12x312 , valve check , spring compression , rotor pair , retainer check valve , spacer outboard bearing , spacer inboard bearing , shim , ring retaining , spring compression , bearing cylindrical roller , bearing cylindrical roller , bearing cylindrical roller , bearing cylindrical roller , slydring , pin dowel special , rod indicator , locknut , locknut , cover slide stop , plug pipe1214 nptf w375 orifice , plug 1827 nptf w062 orifice , bearing angular contact ball , cover cylinder , seal gas , retainer check valve , stop slide , assembly rotor casing , housingseal , o ring & gasket kit , kit for shaft packing , switch isolator63 amp , motor protection , lamp 24vdc white , push button 1 noblue , relay 4co 24vdc , switch selector 230 vac2 amp , programmable logic control , thermister relay , selector switch key , relay insulation 24240 acdc 1no , power supply ip380vacop24vdc 10 amp , temp converter , signal isolator 1 in 1 out , mcb 2 polec curve 6 amp , mcb 2 pole c curve 10 amp , mcb 2 pole c curve 02 amp , mcb 3 pole c curve 02 amp , mcb 1 pole c curve 04 amp , mcb 2 pole c curve 04 amp , lamp 24vdc green , relay base , relay 4co 110v ac , power indicator ip420 m a , handle rotary , contact block , transformer 380115vac630va , hmi , din connector w

CTN :40870146

18 Jul, 2025 72.1 Thousand

Jammu - Jammu And Kashmir

Tender For custom bid for services - repair of vegetation clearance equipment-01 packing kit 10 qty, 02 insulator 01 qty, 03 clutch bell complete 01 qty, 04 spark plug 11 qty, 05 fuel filter 02 qty, 06 oil seal 05 qty, 07 clutch 16 qty, 08 filter body 09 qty, 09 trimmer head 05 qty, 10 fuel pipe set 10 qty, 11 air filter 01 qty, 12 cylinder kit 11 qty, 13 gear case 07 qty, 14 ignition coil 07 qty, 15 carburetor 07 qty, 16 crank 04 qty, 17 fuel tank 03 qty, 18 clutch nut 03 qty, 19 safety guard 01 qty, 20 fly wheel 01 qty, 21 drive shaft 05 qty, 22 accelerator handle 03 qty, 23 recoil starter 02 qty, 24 ratchet 02 qty.

Central Government/Public Sector

CTN :40842678

17 Jul, 2025 NA

Bangalore - Karnataka

Tender For supply of top machined bracket , bottom machined bracket , o/b angle fwd -lh , o/b angle fwd -rh , o/b angle aft-lh , o/b angle aft-rh , sealing fitting rear floor-lh , sealing fitting rear floor-rh , fwd tee control bracket-lhs , c clamp armour stn #1 , l angle armoue stn #1 , c clamp iii armour stn #1 , hat section iii armour stn #1 , cbkt i armour stn # i , c bkt ii armour stn# i , c clamp ii armour station i lh , c clamp ii armour station 1 rh , locking plate aft door top-lh , locking plate aft door top-rh , bell crank lever-lh , bell crank lever-rh , bell crank lever lh , bell crank lever rh , locking bkt front door aft bot.-lh , locking bkt front door aft bot.-rh , locking bkt front door aft mid-lh , locking bkt front door aft mid-rh , locking bkt aft door side bottom , locking bkt aft door side bottom , locking bkt aft door side mid-lh , locking bkt aft door side mid-rh , locking bkt aft door top lh , locking bkt aft door top rh , locking lever lh , locking lever rh , locking lever-top , locking lever top , locking lever bottom lh , locking lever bottom rh , locking lever bracket-lh , locking lever bracket-rh , locking lever bottom lh , locking lever bottom lh , operating handle lever , operating handle lever rh , locking lever bracket lh , locking lever bracket rh , top hinge bkt front door , top hinge bkt front door , bottom hinge bkt front door , bottom hinge bkt front door , hinge bkt top rear door , hinge bkt top rear door , hinge bkt(bot)rear door-lh , hinge bkt bot rear door , nylon strap-pilot lh aft side , nylon handle assembly , catch fwd door-lhs , catch fwd door-rhs , catch bracket- fwd door-lh , catch bracket- fwd door-rh , spacer fwd(windscreen armour assy) , spacer aft , spring holder , threaded sleeve , knob , jettison handle , bush handle braket lhs , bush , fork end threaded , threaded rod end , fork end , fork end , hexogonal nut , spring washer , slide , end cap , slide housing , fork end , plain cable end , spring-door lock , operating handle shaft , fork end , fork end , operating handle shaft rear door , operating handle shaft , washer , threaded ferrule , shaft (handle) , fork end , taper pin , cone bkt (top) front door-lh , cone bkt (top) front door-rh , jettison shaft aft door , fork end , bush-levelling , front door-top aft link rod , cone , front door top link rod , front door mid link rod , front door bot link rod , aft door link rod (top) , aft door link rod(mid) , aft door link rod (bot) , tube , tube , tube-bot.aft (aft door) , tube-side mid (aft door) , tube-side top (aft door) , rod-aft top (aft door) , bush , fork end threaded , cone-lhs , cone-rhs , spring-catch assembly , pin , pin , pin , pin , pin , pin , pin , pin , hs pin , taper pin

Lid Handle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government And Public Sector

Central Government/Public Sector