Tender For rendering of service for providing of structural drawing and design duly vetted by nit and preparation of detailed estimate/boq/survey of site, soil testing (03 nos minimum) complete job for establishment of pre-fab structure at sanasar
Tender For providing of design installation and maintenance of educational lab/centre - vocational lab; furniture; buyer - bed for female students: size 6'x3'x1.5'; angle iron frame (35x35x5 mm, isi marked); 10 mm plywood base (isi marked); front (1 ft) and back (4") supports; finished with black/grey paint; two additional supports fitted with nuts and bolts on the middle frame. desk for female students: size 3'x2'x2.5'; 18-gauge 1"x1" square pipe frame; footrests provided in the middle and on the sides; finished with black/grey paint; edges fitted with polished wooden beading. chair with armrests for female students: seating height 18", backrest height 34", seat size 18"x18"; 12 mm plywood (isi marked) with 8 mm laminate finish; sheesham wood armrests. dining table: size 8'x3'x2.5'; steel angle iron frame (35x35x5 mm, isi marked); 19 mm commercial board with 8 mm laminate finish; sheesham wood edge beading; 6-leg support structure; polished finish. armless dining chair: 25x25 mm square pipe (18-gauge); steel sheet seat and backrest; size 33" (height) x 16" x 18".
Tender For corrigendum : investigation, design and construction of civil structure (sub structure and super structure) works for spire , parking ring, roof, approach bridges over palavagu, shallow water body around the legislative assembly building including earthwork, pile or raft foundations, rcc framed structure consisting of retaining wall, shear/core wall, slabs, beam, pt slab and beam inclined/flared shear walls, columns, using modular/system / fair finish/express formwork,, reinforcement works, waterproofing and miscellaneous works for legislative assembly building in super block e of amaravati government complex area in amaravati capital city, andhra pradesh on lump sum contract (percentage tender) system
Tender For design, fabricate, supply, testing and commissioning of industrial type multipurpose step ladder with platform having rigid & fixed structure with wheel locking arrangement as per drawing no wr-cwm/pl-sketch 213. alt nil specifications as per annexure-1 [ warranty period: 12 months after the date of delivery ] ]
Tender For design, supply, construct, erection and commissioning of modular structure through 3d monolithic precast technology for awcs (anganwadi centers) at various locations in the gujarat state (package-2 ) banaskantha & patan districts (forth try)
Tender For rate contract for design, supply, installation, testing and commissioning of chain link fencing, fabrication of m.s structure, chequered plate, weather shed, bird screen, shutter etc miscellaneous works at ranip,vadaj,sabarmati & chandkheda ward water distribution stations of west zone of water operation department of amc.
Tender For rate contract for design, supply, installation, testing and commissioning of chain link fencing, fabrication of m.s structure, chequered plate, weather shed, bird screen, shutter etc miscellaneous works at different water distribution stations of south west zone of water operation department of amc.
Tender For consultancy for preparation, submission and approval of hydraulic design for construction of outfall drain phase-ii from the junction of sectors 31, 32, 26, and 24 to the supplementary drain, including design of outfall structure at the drain, rohini - construction of outfall drain from the junction of sectors 31, 32, 26, and 24 to the supplementary drain, rohini (phase-i) sub- head : consultancy for preparation, submission and approval of hydraulic design for construction of outfall drain phase-ii from the junction of sectors 31, 32, 26, and 24 to the supplementary drain, including design of outfall structure at the supplementary drain, rohini (phase-ii).
Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to civil hospital jawalamukhi by providing 11/0.4 kv, 400 kva dtr a/w 11 kv ht line in electrical section amb under esd hpsebl no-i jawalamukhi, ed jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.065 km), steel tubular poles 11 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm x2 no., x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, eye hook for earth wire, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, 11 kv g.o. switch, d.o fuse unit, aluminium paint, red oxide point, supply part of 11/0.4 kv 400 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble 300 sq mm, copper thimble 95 sq mm, danger plate, barbed wire, lt cable 3.5 core 400 sq. mm, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, ct pt combined unit, energy meter (3-ph, 4-wire) dlms compliant 1000/5 a ct type for 400 kva dtr, pvc multistrand 2.5 sq mm copper wire, ms angle iron (50x50x6 mm) length 2800 mm x 4 nos., ms angle iron (50x50x6 mm) length 450 mm x 2 nos., erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 400 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 400 kva dtr