Latest lifting gear Tenders | Government lifting gear Tenders

State Government

CTN :40704756

27 Jun, 2025 NA

Rewari - Haryana

Tender For providing of customized amc/cmc for pre-owned products - --; --; comprehensive maintenance contract (cmc); 4; yes - water bath, lab refrigerator, blood donation couch, blood collection monitor, centrifuge, haematology analyzer, centrifuge, water bath, tube sealer, 3 part hemetology analyzer, bacteriological incubator, double pan weighing scale, cord warmer, binocluar microscope, air purifier, blood gas analyzer, cryoprecipitate bath, incubator, laboratory refrigerator, blood culture, esr analyzer, uv cabinet, 5 part hemetology analyzer, 3 part hemetology analyzer, vertical autoclave, oxygen concentrator, fetal monitor, single dome ot light, labour table, single dome ot light, oxygen concentrator, oxygen concentrator, patient monitor, horizontal autoclave, ot ught, ot light, ot monitor, oxygen concentrator, surgical scrub sink, electrosurgical unit, suction machine, infant warmer, infant weighing scale, patient beid, unicare pulse oximeter, 07 portable, nebulizer, suction machine, oxygen concentrator, horizontal autoclave, ogger machine, ot light, ot table manual, ot table electrice, suction machine, conmed power tools, oxygen concentrator, cautery machine, stationary cycle, shortwave diathermy, ultrasonic therapy machine, traction table, parafin wax, microwave diathermy with tracti, shoulder pulley exercise, vibrator machine, shoulder wheel, pulley exercise, hand exerciser, weighing scale, phototherapy, infant warmer, suction machine, observation light, delivery tatile, weighing scale, suction machine, oxygen concentrator, delivery table, patient monitor, single dome of light, observation light, infant warmer, vertical autoclave, billirubinmeter, infant warmer, infant warmer, infant bed

Central Government/Public Sector

CTN :40653638

20 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of vibrator assembly for chp stg_1 for ntpc talcher

CTN :40706467

24 Jun, 2025 7.29 Lacs

Honnali - Karnataka

Tender For construction of a compound around the government junior primary school of holemadhapura village - hom of welding and grinding machine wfdns01, add providing and removing scaffolding at 3 percent on labour wfdns01, painter class i wfdns01, granite/trap broken metal 100 mm and down size lavbd01, coarse sand zone iii lavbd01, add watering charges at 1 percent on material lavbd01, broken stone aggregate 40 mm size lavbd01, broken stone aggregate 20 mm size lavbd01, broken stone aggregate 12 mm to 10 mm size lavbd01, portland cement lavbd01, mixer concrete 1 cum capacity lavbd01, bond stone 20 x 20 x 45 cm lavbd01, tmt bars fe 500 lavbd01, binding wire lavbd01, jungle wood runners and planks lavbd01, silver oak or equivalent planks 38 mm thick lavbd01, mixer concrete small used in culvert wfdns01, casurina poles 100 to 150 mm wfdns01, add handling loading and unloading at 2 percent on material wfdns01, plasticizer super plasticizer wfdns01, add handling loading and unloading at 1 percent on material wfdns01, hom of vibrator 0.71 days wfdns01, welder grade i fdres01, ms flatc, bolts and nutsc, add over head charges 15 percent c, corbon electrodesc, wedler grade ic, hnl add cvc, gst- 5a, display board ciba, miscellaneouscontingencies chargesa, over head & other miscellaneouscharges-arak, add wire brush fine steel wool putty sand paper at 3 percent on cost, mechanic class ii/mechanic hmp grade i/eme grade h, hom of cutting and grinding machinec, ready mix primer paint (ready mix red lead paint) c, add sundries charges at1 % on material hk, ms flat 12x75mm, enamal metal paint nan, rubble stones gc, solid concrete blocks 40 x 15 x 20 cms-4.00 nsqmm matmar50, cast iron arrowsc, expansion boltc, add brush at on 1 percent cost of paint, water proofing cement painthka, add brash putty sand paper at 2 percent on cost of paint, m s square bright bars 20 mm, tools & plants and electrical charges at 2 percent hka, cast iron ornamental designhka

CTN :40706492

24 Jun, 2025 13.23 Lacs

Honnali - Karnataka

Tender For construction of nrlm shed for livelihood activities of kulagatte village self-groups under narega scheme 2023-24 - hnlmr9919-g.i. overflow pipe 20mm dia, hnlmr9930-m.s. holder bat clamp 32mm, hnlmr9932-mosquito proof coupling 25mm, hnlmr9941-orissa pattern of size 580x440mm with integral type foot rests, hnlmr9942-p.v.c automatic flushing cistern 7.5 litres with fittings, hnlmr9944-p.v.c. flushing cistern 10 lts low level with fitting, hnlmr9950-special for overflow pipe, hnlmr9953-vitrified tiles 600x600 mm, hnlmr9955-white vitreous china clay flat back lipped front urinal basin of 430x260x350mm size, hnlmr9957-white vitreous china clay flat back wash basin size 630x450mm, hnlmr9968-pvc pipe of 4kgcum,63 mm, mason and semiskilled, hnlmr9773-add watering charges at 1 % on material, hnlmr9779-add white cement for pointing at 2% on material, hnlmr9780-add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material, hnlmr9782-add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, hnlmr9787-add over head charges 10%, hnlmr9817-ms flat, hnlmr9883-licenced plumber with tools, hnlmr9893-100mm s or p trap, hnlmr9906-c.i. / m.s. brackets for flushing cistern, hnlmr9911-copper plated brass piller tap 15mm, hnlmr9917-g.i. 32mm dia telescopic flush pipes with fittings specials, hnlmr9918-g.i. flush pipe of standard size and c.p brass spreaders, brass unions and clamps including fittings, hnlmr9612-ms tube, hnlmr9615-solvent cement adhesive, hnlmr9616-white cement, hnlmr9674-hom of machinaries for planing, hnlmr9675-hom of vibrator 0.71 days, hnlmr9676-hom of welding and grinding machine, hnlmr9677-mixer (concrete small used in culvert), hnlmr9688-unit cost as per the specification, hnlmr9724-mason class ii (with tools), hnlmr9725-mason class i (with tools), hnlmr9727-add 15% wastage for glass, hnlmr9735-add brush at 1% on cost of paint, hnlmr9737-add brush, putty, glue at 5% on cost of paint, hnlmr9742-add brush, putty, sand paper, roller at 5% on cost of paint, hnlmr9749-add cutting and other wastage 5%, hnlmr9752-add handling , loading and unloading at 1% on material, hnlmr9753-add handling , loading and unloading at 2% on material, hnlmr9754-add hom of welding and grinding machine2% on materia, hnlmr9755-add hom of welding and grinding machine 4% on material, hnlmr9757-over head & other miscellaneous charges, hnlmr9759-add providing and removing scaffolding at 3% on labour, hnlmr9762-add sundries charges at 1 % on material, hnlmr9764-add sundries charges at 2 % on material, hnlmr9769-add tools transportation and machinaries 1% on material, hnlmr9772-add watering charges at 1 % on labour, hnlmr9449-ceramic tiles of size 30 x 30 cms, hnlmr9451-chrominum plated screws, hnlmr9452-cleat angles, hnlmr9455-corbon electrodes, hnlmr9463-enamel metal paint, hnlmr9465-gi coated expansion bolts, hnlmr9484-honne wood, hnlmr9485-honnewood planks for panels 20 mm thick, hnlmr9487-jungle wood runners and planks, hnlmr9488-lead or pvc connection pipe 32mm dia (for wash basin), hnlmr9498-mathi/nandi wood planks for panels 25 mm thick, hnlmr9508-nylon rollers, hnlmr9522-ready mix primer paint (ready mix red lead paint), hnlmr9527-rubber beading for shutters beading, hnlmr9534-silver oak or equivalent planks 38 mm thick, hnlmr9541-stainless steel hollow pipe 25 mm dia, hnlmr9542-stainless steel hollow pipes 16 gauge 50 mm dia, hnlmr9554-tmt bars fe 500, hnlmr9560-weilding rods, hnlmr9562-whitening, hnlmr9597-fabricator, hnlmr9598-fitter class i, hnlmr9607-welder grade i, hnlmr9609-add, hnlmr9611-c.i. / m.s. brackets for flushing cistern, hnl7318-plasticizer / super plasticizer, hnl7335-binding wire, hnlmr10012-pvc beading, hnlmr10013-colour glazed tiles 30x60 cms 6mm thick, hnlmr10014-border tiles 30 x 10 cms, hnlmr10015-m.s rods, hnlmr10017-polyenthylene water storage tank of specified capacity l, hnlmr10021-labour charges for lifting and placing in position and making connection at 7% on material,

State Government

CTN :40691595

24 Jun, 2025 17.31 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure threshing floor including pucca storage at thiruvettakudy vp in kottucherry commune - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheets for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charges of diesel road roller 8 to 10 tonne including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :40691596

24 Jun, 2025 6.67 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of providing and laying cement concrete road kundusamy koil theru at t.r.pattinam (north) vp in t.r.pattinam commune - hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., hire chargesflame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :40704079

04 Jul, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of air rowers , air bike , bike erg , hex bar , foam roller , wall ball , barbell , bumper plates , hex dumbells , kettlebells , battle rope 40ft , resistance band xl , resistance band xxl , vibrator machine , floor rubber mat 100x50ft

CTN :40695940

27 Jun, 2025 12.36 Lacs

Channapatna - Karnataka

Tender For cpt virupakshipura gp building - glazed tiles 300x450 v v, silver oak or equivalent planks 38 mm thick v v, border tiles 30, mason class ii (with tools).., fabricator.., cleat angles.., powder coated 60-70 micron.., mason class i (with tools).., welder grade i.., fitter class i.., ms flat.., m.s rods.., mathi/nandi wood scantling.., mathi/nandi wood planks for panels 25 mm thick.., mixer (concrete small used in culvert).., burnt bricks class 35 (non modular).., binding wire.., tmt bars fe 500.., water proofing materials., brick bats 25 to 100 mm., vitrified tiles 600x600 mm., mm thick plain glass 5.50., casurina poles 100 - 150 mm., mixer (concrete) - 1 cum capacity.., portland cement.., coarse sand (zone iii).., broken stone aggregate 12 mm to 10 mm size.., broken stone aggregate 20 mm size.., burnt bricks class 35 (non modular).,/, hom of vibrator 0.71 days.., plasticizer / super plasticizer.., unit cost as per the specification., ceramic tiles of size 30 x 30 cms..

CTN :40695935

01 Jul, 2025 4.54 Lacs

Khanapur - Karnataka

Tender For supply of materials for development of a public cemetery and construction of a crematorium in tirthakunde village of khanapur taluka. - gusset plates 6 mm thick., tmt bars fe 500,., ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre,., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at4.5 kg per metre, crane charges., tmt bars including 5 per cent or overlaps and wastage, fitter class i-02, a 12x12xgauge g.i.wire 100 mtr at ts.800/per m, mason class i (with tools).,.,, mason class ii (with tools).,., rcc pipes np2 600mm dia including collars.,, granite metal 20 mm.,, granite metal 40 mm.,, crushed stone course aggregate 53.,, vibratory roller 8 tonne,., water tanker,, motor grader 3.35 meter blade.,, wheeled dozer (d50 beml),., laboratory asst. (sslc passed)/mate/supervisor,, gravel 2.36 mm/murrum,, tractor - 40 hp.,, plastic emulision paint 01, unit cost as per the specification,, enamel metal paint.,, painter class i.,, ready mix primer paint (ready mix red lead paint).,, hom of cutting and grinding machine.,, add-01, hom of welding and grinding machine.,, welder grade i,, corbon electrodes.,, anchor bolts 750mm.,, base plate/ base plate, granite / trap broken metal 100 mm and down size, mixer (concrete small used in culvert.), solid concrete blocks (40x20x20cms) 4.00 n/sqmm, hom of vibrator 0.71 days.,, plasticizer / super plasticizer.,., bolts and nuts,, ms flat,., casurina poles 100 - 150 mm.,, jungle wood runners and plank.,, silver oak, or equivalent planks 38 mm thick.,, mixer (concrete) - 1 cum capacity.,, portland cement,., coarse sand (zone iii),, broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 40 mm size,, quarry spalls.,, rubble stones.

CTN :40695546

23 Jun, 2025 47.24 Lacs

Kannur - Kerala

Tender For supply of materials for various works in mgnrega - various works under mgnrega, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator(needle type 40 mm), twisted steel/deformed bars, stone aggregate(single size): 40 mm nominal size, m.s. tube 40 mm dia, average rate of mild steel round barsfor reinforcements, quarry waste, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3m (2.02-3.75m), wall form panel 1250x450 mm, corner angle 45x45x5 mm 2.50 m long, column clamp 450x1070 mm, prop 2m(2-3.5m), structural steel such as tees,angles,channels and r.s joists

Lifting Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government