Latest lifting tackle Tenders | Government lifting tackle Tenders

Central Government/Public Sector

CTN :45731254

09 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of lifting tackle for bg locomotive wheel set assembly with bull gear, as per rdso drg. no. skdl- 4511 alt-1 or latest. set consisting of (1) base plate, qty- 01 no. (2) gusset plate, qty- 04 nos. (3) ms flat (30 x 10 mm thick), qty- 02 nos. (4) strengthening plate, qty- 02 nos. each set consists of 04 items 09 nos only. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45724142

21 Jul, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply, installation, testing & commissioning of lifting tackle assembly to suit 65 ton for lifting of 3-phase loco bodies as per els/vijayawada/scr drg. no. b/els/bza/07 dt: 10-09-2020 or latest if any.[ warranty period: 30 months after the date of delivery ] ]

CTN :45693900

10 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation of automobile trainers and equipment at consignee locations. (tender ref no.26008/2026-27) - light motor vehicle driving simulator, injector -multi hole type, pintle type, petrol engine - 2 stroke, motor cycle/ scooter, injector cleaning unit, injector testing set (hand tester), fuel feed pump for diesel, fuel injection pump - diesel - inline, fuel injection pump - dismantling tool kit, fuel injection pump - distributor fuel rotary pump with standard accessories, fuel injection pump - ve pump with standard accessories, cylinder liner- dry & wet liner, cylinder liner - press fit & slide fit, steering assembly - rack and pinion, air brake trainer assembly, alternator assembly - lmv, engine bearing model set, piston model set, front axle assembly, rzeeppa joint with stand for dismantling and assembly, full floating axle and semi floating axle assembly, wiper motor assembly, cut section model - 4 cylinder diesel engine, cut section model - automatic transmission gear box, cut section model - centrifugal clutch assembly, cut section model - diaphragm clutch assembly, cut section model - radiator - cross flow, cut section model - radiator - down flow, cut section model - shock absorbers, cut section model - single plate clutch assembly, cut section model - turbocharger, demonstration board - anti theft device car, automotive safety air bag simulator, car air conditioner trainer, demonstration board - crdi system, demonstration board - electronic ignition system and ignition coil, disk brake trainer, drum brake trainer, working model - power windows, working model - torque converter, denting kit set, engine compression tester (diesel), two post car lift- capacity 4 ton, electric operated, radiator pressure tester, tyre changer machine, tyre air pressure gauge with holding nipple, wheel alignment machince computerized 3d, wheel balancing machine (for wheel balancing of lmv), air conditioning service unit - car, automotive battery charger, automotive battery tester/ analyser, battery terminal cleaner tool, air blow gun, air impact wrench with impact sockets, engineers stethoscope, grease gun - 500 grams, oil can 500 ml, oil filter wrench - upto 500 mm, piston ring compressor - 50 - 100 mm, piston ring expander and remover - 50 - 100 mm, piston ring groove cleaner, belt tensioner gauge, car jet washer with standard accessories, auto electrical work bench, gloves: rubber, gloves: cotton, industrial/ safety shoes, industrial helmet, blow lamp: 0.5 liter, magnifying glass: 75 mm, lifting tackle/ sling: 1 ton, 2 meters, laser distance measuring instrument, demonstration board: electric vehicle cooling system, engine and transmission system for electric vehicle, cut section of electric vehicle motors, hvac trainer, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, lighting and wiring system for electric vehicle, electric vehicle diagnostic scanner, solar based charging system, electric vehicle tool kit, electrically insulating blanket, clamps for insulating blanket, insulated rubber mats, gloves: electrically insulated, industrial/ safety shoes: electrically insulated, glove inflator kit, goggle: white glass, ac current digital clamp meter, digital continuity tester, soldering iron set: mechanic electric vehicle

Central Government/Public Sector

CTN :45702701

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of rolling stock - condemned and unserviceable bg demu coach no. special repair dpc 008073 with available items [refer enclosure for the material composition]. location: coach care centre tpj/diesel loco shed goc. custodian: sse/demu/diesel shed/goc. re-claimable items - [1] wheel sets with bull gear-04 sets [2] 8v 450ah lead acid battery-03 nos [3] 6v batteries-18 nos [4] truck assembly-02 sets [5] axle box with bearings-08 nos [6] buffer complete-02 nos [7] schaku coupler assembly[draw bar with hook, draft gear assembly]-01 set [8] brake cylinders-04 nos [9] wear pieces(brass)-04 nos [10] dpc main doors-02 nos. advice note no.073817-25-08698, dt: 11.12.25. note-[1] delivery to be made on as is where is and lot basis.[2]the location indicated is only tentative. railway reserves the right to change the location of sold coach, based on the availability of track, cutting and loading space and other administrative reason, as deemed fit by the auction conducting officer.[3]gas/chisel cutting is permitted only to sizes that are loadable with a crane, only after ensuring sufficient safety measures against fire hazards etc. to avoid any mishap to any person, railway material etc. and the same should be ensured by the witnessing officials.[4]in case purchasers require usage of any railway assets/materials such as electricity/forklift truck etc. during the process of delivery, they are required to pay the prescribed amount to railways, as directed by the respective custodian of the lot. special condition- [1] reclaimable item as said above in description of the lot, should be returned to the custodian before commencing delivery. [2] in order to make the assessment, the purchaser may visit the coach offered for condemnation and the site conditions before quoting the offer.[3] the purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment. [4] the weight and quantities were taken into consideration as advised by the custodian [5] the purchaser may note that reclaimable items of coach are to be stripped instead of gas cutting to avoid damage to rc items and the purchaser should make such arrangements, especially traction motors should be removed by using proper tools and equipments without causing damage to truck assembly [6] the purchaser is strictly instructed to transport/stack all the reclaimable items at one location well away from the cut off parts of the coach as directed by the custodian. [7] the purchaser will be held responsible for any damage/fire accident caused to the railway property. [8] railway is not responsible for any shortage.[9] after completion of delivery, purchaser has to keep the cutting and loading spot neat and clean, free of any left over coach scrap. [10] railways does not guarantee for quality, quantity description etc.[11] delivery should commence immediately after cutting without any delay. [12] the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. [13] bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. [14] part delivery is not permitted against part payment. [15] if any hsd oil/lube oil available in fuel tank/oil sump of the said coach, the same may be returned to the custodian.(location: coach care centre tpj / diesel loco shed goc)

Central Government And Public Sector

CTN :45486950

30 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : (1) design, manufacturing, supply, erection, testing and commissioning of 5 ton eot crane with remote for demounting bay of assembly shop as per rwf technical specification no.rwf/m/m&p/2025-26/5-2 t eotc d/m bay enclosed. (2) maintenance spares as per schedule-iv and additional spares and items viz. slings / lifting tackles as per schedule-i of specification. (3) any other essential spares for two years normal maintenance to cover the complete range of mechanical, hydraulic and electrical equipment as per clause 1.3 ofspecification. (4) maintenance tools as per schedule v of specification. (5) any other accessory treated as concomitant accessory. ]

Central Government And Public Sector

CTN :45663716

23 Jul, 2026 NA

Bongaigaon - Assam

Tender For supply, installation, commissioning & testing of eot crane 25/5 ton and dsl (type and length of dsl as specified in schedule-i) along with spares as per schedule-iv and additional spares and items viz slings/lifting tackles as specified in schedule-i, maintenance tools as per schedule-v and any other accessory treated as concomitant accessory. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45644598

10 Jul, 2026 NA

Bangalore - Karnataka

Tender For (1) design, manufacturing, supply, erection, testing and commissioning of 5 ton eot crane with remote for demounting bay of assembly shop as per rwf technical specification no.rwf/m/m&p/2025-26/5-2 t eotc d/m bay enclosed. (2) maintenance spares as per schedule-iv and additional spares and items viz. slings / lifting tackles as per schedule-i of specification. (3) any other essential spares for two years normal maintenance to cover the complete range of mechanical, hydraulic and electrical equipment as per clause 1.3 ofspecification. (4) maintenance tools as per schedule v of specification. (5) any other accessory treated as concomitant accessory. ]

Central Government/Public Sector

CTN :45098425

25 Jun, 2026 NA

Koraput - Odisha

Tender For bid to ras corrigendum : tender for supply of supply of tools from hal provided technology d d m - screw jack lifting device , device for lifting , fixture for lifting , fixture for lifting , device for lifting , fixture for lifting , fixture for hoisting , fixture for lifting , engine lifting tackle , technological hook , fixture for lifting

State Government

CTN :45474980

01 Jul, 2026 NA

Rewa - Madhya Pradesh

Tender For corrigendum : enquiry for work contract for testing of pressure vessels and lifting tackles of ph-i/ii/iii/iv sirmour/silpara/deolond/jhinna dist rewa/maihar/shahdol m.p

Central Government/Public Sector

CTN :45561372

25 Jun, 2026 NA

Erode - Tamil Nadu

Tender For set of pins and links for lifting tackle assembly consisting of 2 (two) items as per drawing (detailed drawing in drawing. no. sk.dl-2671). 1) supply of link item no. c to drawing no. sk.dl-2670 qty : 1 no./set 2) supply of pin item no. f to drawing no. sk.dl-2670 qty : 1 no./set note: 1) material safety and test certificate to be supplied with approved nabl or government approved test lab . [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Lifting Tackle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors