Web Analytics Made Easy - StatCounter

Light Fixture Tenders

Get complete information related to latest Light Fixture Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Light Fixture Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Light Fixture Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government And Public Sector

CTN :45716077 Due date: 21 Jul, 202621 Jul, 2026 NA
Tender For supply of water proof travel pouch 23x17x7 cm , modern cardboard with paper clip writing pad a4 size , pencil box , file folder, transparent poly-plastic a4foolscap documents file storage bag with snap button , transparent a4 size document presentation file 10 pcs , highlightermarker yellow , highlightermarker green , highlightermarker red , spiral notepads 4x6 lined writing pads of paperpack of 12 pcs , steel ruler 30cm , multicolor sticky notes vibrant colors 80 sheets neon sticky notes 3x3 pack of 5 colors , 4 compartments plastic document file tray , surgical spirit 250 ml bottle , bd plain vacutainer blood collection tube - 6ml red cappack of 100 , scalp vein no. 25 pack of 50 nos , scalp vein no. 24 pack of 50 nos , tarsons 2.0ml pp sterile amber screw cap tube self standing with knurl pack of 500 , clean-puncture proof sharp containers 2 ltr blue colour , fiber- reinforced taylor measurement tape non stretchable,3meters.

State Government

CTN :44231929 Due date: 13 Jul, 202613 Jul, 2026 NA
Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

corporations/Associations/Others

CTN :45728461 Due date: 03 Jul, 202603 Jul, 2026 NA
Tender For auction sale of pun_nxtra_iron_iron_97_263389,pun_nxtra_iron_fire extinguisher_31_263110&263389,pun_nxtra_led light fixtures_led light fixtures_18_263389,pun_nxtra_plastic_plastic_12_263389,pun_nxtra_printer_printer_2_263389,pun_nxtra_fire hydrant system _accessories, etc,pun_nxtra_dg_dg 125 kva_1_263389

corporations/Associations/Others

CTN :45728463 Due date: 03 Jul, 202603 Jul, 2026 NA
Tender For auction sale of nxtra_hazardous_plastic hoses_449.3_kg_262980,nxtra_e-waste_lcd monitor / screen_6.3_kg_262980,upe_nxtra-ino--up_devices_web camera_15_254937,upe_nxtra-ino--up_furniture_furniture_7_263261&263265,upe_nxtra-ino--up_led light fixtures_led light fixtures_128_263261&263265,upe_nxtra-ino--up_plastic_plastic_57_263265,nxtra_general_shelter - plastic fiber & iron material mixed, etc,nxtra_hazardous_power cable unarmoured (copper), etc,upe_nxtra-ino--up_aluminium_loose aluminium material only, etc,upe_nxtra-ino--up_installation material_installation material, etc,upe_nxtra-ino--up_iron_fire extinguisher_153_254937&263261&263265,upe_nxtra-ino--up_iron_iron_1284.5_254937&263261&263265

corporations/Associations/Others

CTN :45700822 Due date: 06 Jul, 202606 Jul, 2026 16.46 Lacs
Tender For regular operation and maintenance of street lights and high mast light with material for two years at different industrial areas of ajmer zone, amounting to rs. 16.46 lakh - street light repairing work and on/off main switch in industrial areas of ajmer including rewiring of fixtures, changes of ballast, clamp, stater, condenser, tube rods, stater sheet, tube holder, mercury & sodium vapour lamps, ignitor & refixing on poles and change of fixtures, change of main switch, kit kat fuse wherever necessary complete including joining of jumpers, complete repairing of tube light fixtures, mercury vapour and sodium vapour lamp fixture ( all required material will be arranged by the contractor except new fixture). led fixtures., contract for operation and maintenance of high mast light (led fixtures) with material as per enclosed terms and conditions. the scope of work includes operation and maintenance of high mast lights, on and off high mast light, electrical panel, repairs of light with all required materials, replacement of necessary electrical components, cable, timer, contractor etc including excavation for cable and maintaining the light in good condition as per enclosed terms and conditions.

corporations/Associations/Others

CTN :45702242 Due date: 07 Jul, 202607 Jul, 2026 17.03 Lacs
Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

Corporations And Associations And Others

CTN :45723486 Due date: 08 Jul, 202608 Jul, 2026 5.01 Lacs
Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 140 inderpuri under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity as required., supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", supply of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt

Corporations And Associations And Others

CTN :45723488 Due date: 08 Jul, 202608 Jul, 2026 5.08 Lacs
Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 87 ranjeet nagar under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity, fabrication, supplying and fixing class b galvanised single overhang arm bracket made out of 250 mm long galvanised top tube with cap and 1000 mm long 32 mm dia galvanised pipe with tightening bolts complete as required., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supply of following size of pvc insulated & pvc sheathed copper conductor 3 core submersible cable conforming to is . 694/210 etc. as rqd. 3 2.5 sqmm with voltage grade 1100 volts., supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (b) single phase 3.0 hp having discharge of 100 lpm approx. at 52 m head, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., supply, installation, testing and commissioning of cubical type control panel board for single phase & three phase submersible pumping set of following rating complete with contactor, relay , mcb ,condenser ,voltmeter, ammeter and indication lamp etc including connections etc as reqd. (c) 3 hp (three phase), providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", supply of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt

Corporations And Associations And Others

CTN :45723490 Due date: 08 Jul, 202608 Jul, 2026 5.04 Lacs
Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 139 narayana vihar under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity as required., fabrication, supplying and fixing class b galvanised single overhang arm bracket made out of 250 mm long galvanised top tube with cap and 1000 mm long 32 mm dia galvanised pipe with tightening bolts complete as required., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supply of following size of pvc insulated & pvc sheathed copper conductor 3 core submersible cable conforming to is . 694/210 etc. as rqd. 3 2.5 sqmm with voltage grade 1100 volts., supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", subppy of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt

CTN :45744304 Due date: 07 Jul, 202607 Jul, 2026 1.25 Lacs
Tender For providing &amp fixing of lighting fixtures for new 33 kv capacitor bank bay at 132 kv gss raithal, distt- bundi
 Loading, Please wait...

Connect us via What's Up