Get complete information related to latest Lighting Equipment Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lighting Equipment Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lighting Equipment Tenders.
Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh
Tender For regular operation and maintenance of street lights and high mast light with material for two years at different industrial areas of ajmer zone, amounting to rs. 16.46 lakh - street light repairing work and on/off main switch in industrial areas of ajmer including rewiring of fixtures, changes of ballast, clamp, stater, condenser, tube rods, stater sheet, tube holder, mercury & sodium vapour lamps, ignitor & refixing on poles and change of fixtures, change of main switch, kit kat fuse wherever necessary complete including joining of jumpers, complete repairing of tube light fixtures, mercury vapour and sodium vapour lamp fixture ( all required material will be arranged by the contractor except new fixture). led fixtures., contract for operation and maintenance of high mast light (led fixtures) with material as per enclosed terms and conditions. the scope of work includes operation and maintenance of high mast lights, on and off high mast light, electrical panel, repairs of light with all required materials, replacement of necessary electrical components, cable, timer, contractor etc including excavation for cable and maintaining the light in good condition as per enclosed terms and conditions.
Tender For supply of fab and sply of high mast 30mt , sup led flood light 500w , flp feeder pillar , foundation bolt stl , sply of double dome aviation lamp , instl of mast feeder pillar , i t c of flood light fixture for high mast , inst testing e and c of high mast 30mt
Tender For supply of portable emergency lightingequipment box suitable for 110 v dc tl system with all accessories conforming to rdso's specn. no. rdso/pe/spec/tl/0012-2000 (rev.-0) with amdt. no. 1. [ warranty period: 30 months after the date of delivery ] ]
Tender For purchase of following materials related to chapakal/solar water tower/urban water supply pipe line repair and street light repair installed-di split collar isi mark ,di jointer isi mark nut (7suta) , bolt(suta) , coupling bolt (4 sutta) , esr nut bolt (5 suta ,4inch long) , chain kuppi isi mark , grinder machine good quality , tool set , water testing lab equipments , alum , bleaching powder , lime , grease oil , hydraulic oil , engine oil , breaker (16 kg) , generator (10kva) , pipe wrench (24 n0) , pipe wrench (18 n0) , pipe wrench (14no) , 18/19 ring wrench , 16/17 ring wrench , 16/17 dial wrench , pipe lifter(1.25inch) , rod die , blade (aary patti) , 30/32 ring wrench , 30/32 dal wrench , 36 n0 ring wrench , 36no. dal wrench , plash , 20 no ring wrench , aary frame , electrode rod , pecking all dia(100mm to 600mm) , hrc fuse-100a , kit kat fuse-100a , 250 watt ballast, copper winded, make-cropmpton, phillips etc. , 400 watt ballast, copper winded, make-cropmpton, phillips etc. , 250 watt mh lamp, make-cropmpton, phillips etc. , 400 watt mh lamp, make-cropmpton, phillips etc. , ignitor, make-crompton, bajaj etc. , 33mfd capcitor , 42 mfd capcitor , gi d-clamp (size: l-13', b-2') set with 3 nut bolt (m6x16) for street light, 2mm thickness, d-clamp to fix in pole and round clamp to fix light with pipe. , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1.5 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-2 inch, pipe thichness-1.5mm , meggar, make-fluke,waco etc. , multimeter, make-fluke etc. , tester, make-fluke etc. , 3p, 16-32a, power contactor, make-l&t, abb, siemens, , extension board with 5mtr cable , combination plier, make- taparia etc. , nose plier, make- taparia etc. , wire stipper, make- taparia etc. , screw driver set, make- taparia etc. , hammer(bal pin), 500 g, make-taparia etc. , drill machine ,800-1200 watt, make-bosch,dewalt etc. , analog timer for high mast , gi wire for binding purpose(18 gauge ) , ldr(light dependent resistor) sensor for high mast , soldering iron, power-65 watt with complete set , d-spanner set upton-32mm , ring-spanner set upton-32mm , allen key set , pvc tape , bamboo ladder , industrial socket , industrial plug top , old tyep vintage bakelite switch for street light , insulation piercing connector upton-50mmsq. , surface mounted led pcb plate for 35 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 45 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 50 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 70 watt street light,make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 110 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 120 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 190 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 200 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 35 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 45 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 50 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 70 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 110 watt street light,make-crompton, havells, orient, bajaj etc. , driver for 120 watt street light,make-crompton, havells, orient, bajaj etc. , 3-phase motor starter upto-20 kilowatt motor , 1-phase motor starter upto-5hp motor , electric air blower with dust extraction, 800-1000 watt, make-bosch, buildskill etc. , electrical adjustable pole climbing shoe
Tender For regarding inviting tenders through e-procurement for the supply of drinking water and street lightingequipment for the year 2026-27 to bogadi gram panchayat of nagamangala taluk - submersible motor pump12.50 hp 90 lpm 264 m 24 stg outlet dia 2.00, submersible motor pump12.50 hp 120 lpm 220 m 20 stg outlet dia 2.00, submersible motor pump 10.00 hp 90 lpm 220 m 20 stg outlet dia 2.00, submersible motor pump7.50 hp 90 lpm 165 m 15 stg outlet dia 2.00, gm copper alloy globe valves65 mm dia, gm copper alloy globe valves50 mm dia, gm copper alloy globe valves20 mm dia, gm copper alloy globe valves 15 mm dia, gm copper alloy gate valves 65 mm dia, gm copper alloy gate valves 50 mm dia, gm copper alloy gate valves 15 mm dia, gi union 65 mm dia, gi union 50 mm dia, gi socket 65 mm dia, gi socket 50 mm dia, gi socket 15 mm dia, gi tee 65mm dia, gi tee 50 mm dia, gi tee 25 mm dia, gi tee20 mm dia, gi bend 65 mm dia, gi bend 50 mm dia, gi elbow 65 mm dia, gi elbow 50 mm dia, gi elbow 20 mm dia, pvc pipe 50mm and 6 kg/sqc, pvc pipe - 63mm and 6 kg/sqcm, pvc tee 63 mm dia, pvc tee 50 mm dia, pvc elbows 63 mm dia, pvc elbows 50 mm dia, pvc coupler 63mm dia, pvc coupler 50mm, pvc pipe - 75mm and 6 kg/sqcm, gi elbow 15 mm dia, gi collar 65 mm dia, gi collar 50 mm dia, gi collar 40 mm dia, gi collar 20 mm dia, gi collar 15 mm dia, pvc reducer 63 mm dia, pvc reducer 50 mm dia, pvc service saddles 63 mm dia, pvc service saddles 50 mm dia, pvc bend 63 mm dia, pvc bend 50 mm dia, outdoor led fitting120w 5700k ., outdoor led fitting. 40w 5700k, outdoor led fitting 25w 5700k, gp led streetlight 200 w, led streetlight 120 w, led streetlight 40w, led bulb 18w 6500k, led bulb 12w 6500k, gp heavy duty gi pipe of 65mm dia, gp heavy duty gi pipe of 50mm dia, gp first aid box metal with all accessories, aprons gp, mask gp, hand gloves gp, hand wash cleaner jak, jak bleaching powder, supply and delivery at site delivery of best indigenous brand new mcb miniature circuit breakers of required capacity as per is 88228/1978and its latest amendments and with isi mark of 6/10/16/20/25/40 ampswith scalable box, out door starter6 to 15 hp pumps, out door starter upto 6 hp pumps, size 80 mm non return valve, size 65 mm non return valve, size 50 mm non return valve, size 80 mm gate valve, size 65 mm gate valve, gate valve size 50 mm, led streetlight 200 w gp, gp led streetlight 150 w, led streetlight 70w, porcelain fuse channel 63 a, porcelain fuse channel 32 a, porcelain fuse channel 16 a, gp double arm bracket with 2000 mm standard 40/50 mm dia, gp single arm bracket with 2000 mm standard 40/50 mm dia, ms long polygon high mast with single/multiple telescopic sections 16 m - top 150 mm and bottom 410 mm dia, ms long polygon high mast with single/multiple telescopic sections12 m/12.5 m - top 100 mm and bottom 310 mm dia, galvanized conical hot dip pole 10 m - top 75 mm and bottom 165 mm dia, galvanized conical hot dip pole 9 m - top 75 mm and bottom 165 mm dia, galvanized conical hot dip pole 6 m - top 75 mm and bottom 135 mm dia, galvanized conical hot dip pole 5 m - top 75 mm and bottom 125 mm dia, galvanized conical hot dip pole 3 m - top 77 mm and bottom 105 mm dia, pvc wire - 16 sqmm al wt 4.2 kg total wt 7.5 kg/100 mtr coil, pvc wire - 10 sqmm weight per 100 mtr coil 5.3 kg, pvc wire - 6 sqmm weight per 100 mtr coil 3.5 kg, pvc wire - 2.5 sqmm weight per 100 mtr coil 1.8 kg, miniature circuit breakers 50-63 a dp, miniature circuit breakers 40 a dp, miniature circuit breakers 6-32 a dp, automatic star-delta starter upto 12.5 hp, outdoor led fitting 240w 5700k, outdoor led fitting 200w 5700k
Tender For supply of electrical goods in the year 2026-27 in sawyerpuram town panchayat - insluation gum tape roll - isi , 1/18 vir copper wire [1/44] [90mtr], 3/20 cts copper wire [3/36] [90mtr] , 7/20 cts copper wire [7/34] [90mtr] , 1.5 sq.mm 3 core copper cable , 2.5 sq.mm 3 core copper cable , 36w 4pin lamp holder, 36w lamp clip, led fitting top protection glass - street light, led fitting top protection glass - flood light, 20 / 25 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 32 / 40 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 6amps to 32 amps sp mcb, fuse unit 32 amps 415v , fuse unit 63 amps 415v , main switches spn 32 amps 2 pole , main switches tpn 32 amps , main switches tpn 63 amps , automatic on/off street light timer switch with 24hrs 7 days programable digital timer clock, 40 amps 4 pole contactor with coil, mcb switch and connector fully wired with all accessories, street light meter/main box with wooden board, main switch, fuse carrier fully wired with all accessories, electronic 7 days 24 hrs programable ditial timer clock, 63 amps 4 pole contact with coil, 9w led bulb, 36w 4 pin non retrofit type cfl power saver lamp, 36w 4 pin non retrofit type cfl power saver choke, 20w high bright led 4 feet light, 20w led power saver street light fitting, 25w led power saver street light fitting, 30w led power saver street light fitting, 36w led power saver street light fitting, 50w led power saver street light fitting, 150w led power saver flood light fittings, 200w led power saver flood light fittings, 40w all-in-one solar led street light fittings, 60w all-in-one solar led street light fittings, 80w all-in-one solar led street light fittings, 18w to 25w led chip board, 30w to 36w led chip board, 45w to 60w led chip board, 72w to 90w led chip board, 120w to 200w led chip board, 18w to 25w led heavy duty electronic driver, 30w to 36w led heavy duty electronic driver, 45w to 60w led heavy duty electronic driver, 72w to 90w led heavy duty electronic driver, 120w to 200w led heavy duty electronic driver, 10 kv surge protector, 48` ceiling fan with all accessories, 10metre hot dip galvanised octogonal pole with round ring arm and 4nos of strong 5feet anchor bolts, templates, and nuts etc.. complete set, 16 amp mcb, service charges automatic on/off street light timer switch box , service charges for mini mast lighting system, service charges for high mast lighting system, ec mcb 40 amp, 7/16 wire coil (copper)
Tender For supply of portable emergency lightingequipment box (peleb) complete with all accessories and conforming to rdso specification no. rdso/pe/spec/tl/0012-2000 (rev-0) june 2000 to amndt. no.1. the list of accessories are as below :- (i) portable emergency lightingequipment box drg. no. skel-2356 alt.6 (ii) telescopic tri-pod stands drg. no. skel-2395 alt.1. (iii) flood light assembly complete with two lamps drg, no. rdso/pe/sk/tl/0010-2000 (rev. 2). (iv) inspection lamp and holder complete drg. no. skel- 4271 alt.3. (v) crocodile clip drg.no. skel-2695 alt. 1. (vi) terminal board drg.no. skel-3551. (vii) a set of screw driver and spare screw shall be kept inside the pele box [ warranty period: 30 months after the date of delivery ] ]