Tender For tender for supply of brake valves and repair kit for wds 6 and wdg 3a locomotives - a 9 automatic brake valve , repair kit for a 9 auto brake valve , c 2 relay valve with 6mm choke , repair kit for c2 relay valve , sa 9 independent brake valve , repair kit sa 9 independent brake v v
Tender For supply of electrical materials for the repair and maintenance of street light as per the boq - details, t-5 power/energy saver 2x24w choke, t-5 power/energy saver 24w ftl tuberod, 2x24 t5-holder, t5 power saver 2x24 fixture acrylic transparent cover, t5 power saver 4x24 fixture acrylic transparent cover, 150w hpsv choke, 150w hpsv lamp, capacitor 33mfd 250vac 50 hz, electronic ignitor suitable for 150w hpsv lamps, 150w holder (porcelain), led driver 50w bis certified, led mcpcb plate 60w, led mcpcb plate 50w, led mcpcb plate 150w, supplyingof isi marked and approved make of moulded case circuit breaker(mccb) suitable for 3phase,3pole,50hz,415 volts, ac supply with respective interrupting capacity(ka) at 415 volts cited against their range standard conforming to is - 8828: 8.1mccb with breaking capacity 25 ka at 415 v: current rating -125 amps & 70% -100% adjustable, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light sub feeder panels - type 2 pluggable spd 3+1, rating l-n/n-pe uc 255/320 v in 30/60ka ka, lmax 30ka/60 ka, up 1.5kv, supplying of isi marked and accepted standard of miniature circuit breaker(mcb)ofcseries suitable for 240/415volts,50cycle,10ka value ac supply confirming to is:8828:1996,iec:60898 :2002 but without enclosures: single pole 63 amp., astronomical timer with dst feature, contactor 3 pole 90 amp 50hz 415volts with no-nc contacts, tpn connector 150a, supply of approved make powder coated sheet steel encloser spn mcb db inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator): 8 way double door, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light - type 2 pluggable spd 1+1, rating l-n/n- pe uc 230/400 v in 5 ka, imax 10 ka, up 1.2kv, led batten tubelight 20w, supplying of approved make tpn mcbdb metal double door with provision for fpmcb/isolator/rccb/rcbo as incomer and sp mcbs as outgoing inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator ): 8 way (8+24), 8 sq.mm multistrand pvc insulated copper wire bundle 90mtr, 1.sq.mm aluminium single core wire bundle of 100mtr. isi marked, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 2-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 4-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 1-core isi marked with alu. stranded/solid conductor: 25sq.mm unarmoured, wooden ladder 21ft, toolkit set consisting of different sizes l-keys, screw drivers, testers and plier set., taperoll box consisting of 30pcs (conforms to is: 7809 (part 3, sec 1),self extinguishing,protects from electrolytic corrosion,excellent water resistance,suitable for primary ins
Tender For repairs/replacement of light system including light fitting and lightingprotectionsystem in bldg. no. 254, 244, 460, 429 and 529 u-viii inside filling area at o. f. chanda.
Tender For tender for supply of solar pv panel topcon - 15 kw , grid connected inverter/ power conditioning unit (pcu) alongwith built-in meter , module mounting structure (mms) , structure accessories , net meter and solar meter , array junction box , dcdb , acdb , string and jumper , earthing and cable , lighting arrestors , lightingprotectionsystem (lps) , surge protection device (spds)- surge arrestor , connectors , conduits and pipes. , dc cable for string and jumper , power cable from inverter to acdb , power cable for earthing - 15 kw , ac armored aluminum cable - 15 kw , installation , testing and commissioning - 15 kw , grid islanding protection as per nit , danger boards & signages as per nit , fire extinguishers as per nit
Tender For supply of electric samagri for f.y. 2026-27 -multi-wire copper 1 mm (actual size) | multi-wire copper 1.5 mm (actual size) | multi-wire copper 2 mm (actual size) | multi-wire copper 2.5 mm (actual size) | aluminum single-core wire 10 mm actual size aluminum cable (2-core, 10 sq. mm), aluminum cable (4-core, 10 sq. mm), armored aluminum cable (4-core, 10 sq. mm), standard incandescent bulb (40 watt), standard bulb holder, bulb holder (24 watt), led bulb (11 watt), led bulb (15 watt), led bulb (40 watt), led bulb (50 watt), led street light set (60 watt), led street light repair kit (driver & plate - 60 watt), led street light set (72 watt), led street light repair kit (driver & plate - 72 watt), led street light set (90 watt), led street light repair kit (driver & plate - 90 watt), led street light set (120 watt), led street light repair kit (driver & plate - 120 watt), led street light set (135 watt), led street light repair kit (driver & plate - 135 watt), led street light set (150 watt), led street light repair kit (driver & plate - 150 watt), led field light set (120 watt), led field light set (150 watt), led field light set (250 watt), led field light set (400 watt), cfl tube light rod (24 watt), cfl tube light rod (36 watt, 4-pin), tube light bracket (1-unit, including nuts & bolts), sodium lamp bracket (1-unit, including nuts & bolts), acrylic cover (2x36 watt), acrylic cover (96 watt), fixture set. 4-pin holder (24w/36w, heavy-duty), porcelain holder (85w, heavy-duty), electronic choke (24w), electronic choke (36w), pvc tape, taparia pliers, taparia screwdriver, taparia voltage tester, branded safety gloves, allen key set (sizes 1 to 25), t-handle wrench set (sizes 1 to 50), tricolor rope light (15m), waterfall string lights (10ft), led street light (30w), led street light (45w), led bulb (9w), led bulb (6w), led bulb (20w), led street light repair components (30w/45w), mcb (6a, 12a, 20a, 25a, 32a), mcb box (6-way), mcb box (8-way), mcb box (10-way), mcb box (12-way), led tube light (24w), single-core copper wire (12mm), single-core copper wire (14mm), multi-core copper wire (4mm), multi-core aluminum wire (6mm), multi-core aluminum wire (8mm), ceiling fan (copper winding - bajaj/havells), ceiling fan (aluminum winding), multi-core aluminum wire (1.5mm - actual size), multi-core aluminum wire (2mm - actual size), multi-core aluminum wire (2.5mm - actual size), open-end spanner set (sizes 1 to 50), rechargeable led bulb (9w), rechargeable led bulb (6w), rechargeable led bulb (20w).
Tender For supply and installation of lightingprotectionsystem for tm5 at tnpl unit ii - supply and installation of lightning protectionsystem for tm#5 at tnpl unit ii