Lime Mortar Tenders

Get complete information related to latest Lime Mortar Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lime Mortar Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lime Mortar Tenders .

Filter

Loading....

Get Tender in Email

corporations/Associations/Others

CTN :45034145

20 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

CTN :44345613

30 Apr, 2026 3.5 Thousand

Bengaluru - Karnataka

Tender For corrigendum : procurement of machinery and equipment - inside caliper (divider)150, machine .brushes., bench. brushes., file,brushes., hacksaw .frame fixed 300mm., needle .file set., knurling .tool straight & diamond cut., hss .centre drill dia 8 mm., hss .centre drill dia 3.0 mm., hss .counter sink bit 120 degree., hss die .m4 - m12 with die stock., hss drill bit .straight shank dia 3 to 12 mm (step of 0.5 mm) (set)., goose neck .clamp set., strap .clamp set., machine .vice 150 mm (drilling)., self centering drill chuck 12 .mm., bench .grinder., dia .indicator - 0.01mm with styallus (needle type)., radius .gauge from 7.5 -15mm., thread .pitch gauge metric & inches., surface .plate granite 600 x 600 x 80 mm with stand., number .punch 5 mm set., pillar drilling. machine., cnc .simulators., outside .caliper (divider) 150, hammer .cross peen 0.75 kg with handle, flat .chisel, hss hand .hacksaw blade 18 tpi, magnetic .v block, rotary .table, sleeves .mt 3, sleeves .mt 2, sleeves .mt 1, materail .handling equipment, feeler .gauge 0.05 to 1.0 mm, radius .gauge upto 7mm, vernier .bevel protractor, universal .magnetic dial stand, outside .micrometre 25-50 mm, outside .micrometre 0-25 mm, dial .vernier 150 (0.02 lc), digital .vernier 0 - 150 mm, vernier .caliper 0 - 200 mm, vernier .caliper 0 -150 mm, vernier .height gauge 300 mm, center .punch, scriberr, try .square 4 inch blade, divider .spring type -150 mm, cnc cylindrical grinding machine., tool presetter , hydraulic vice - l- 525 x w- 108 x 135mm , opend 175mm, lathe dog carrier - bent tail 2 , lathe dog carrier - straight tail 2 , inserts type shell end mill dia 63mm with inserts (30nos.) 3 box., solid carbide end mill four flute dia 12mm , solid carbide end mill four flute dia 10mm , solid carbide end mill four flute dia 8mm , solid carbide end mill four flute dia 6mm , solid carbide end mill four flute dia 5mm , solid carbide end mill four flute dia 4mm , ball peen hammer 250 gms & 500 gms, warding file smooth 6 , knife edge file smooth 6 , knife edge file smooth 8 , knife edge file second cut 6 , knife edge file second cut 8 , knife edge file second cut 10 , half round file smooth 6 , half round file smooth 10 , half round file second cut 6 , half round file second cut 10 , half round file second cut 12 , half round file bastard 12 , round file smooth 6 , round file smooth 10 , round file second cut 6 , round file second cut 8 , round file second cut 10 , round file second cut 12 , round file bastard 12 , triangular file smooth 6 , triangular file smooth 8 , triangular file second cut 6 , triangular file second cut 8 , triangular file second cut 10 , triangular file bastard 10 , square file smooth 6 , square file smooth 8 , square file second cut 6 , square file second cut 8 , square file second cut 10 , square file bastard 12 , hand file second cut file 10 , flat file rough 12 , flat file smooth 8 , flat file smooth 10 , flat file second cut 8 , flat file second cut 10 , flat file second cut 12 , flat file bastard 12 , convex milling cutter dia 63 x 6 radius x bore size dia 27 mm., concave milling cutter dia 63 x 6 radius x bore size dia 27 mm., t slot cutter with parallel shank dia 17.5x8mm width shank dia 8mm, hss parallel shank end mill dia 16 four flute, hss parallel shank end mill dia 12, hss parallel shank end mill dia 10, hss parallel shank end mill dia 8, hss parallel shank end mill dia 6, hss tool bit 1 x 1 x 6 - 8% cobolt, hss tool bit 3/4 x 3/4 x 6 - 8% cobolt, hss tool bit 1/2 x 1/2 x 6 - 8% cobolt, hss tool bit 1/4 x 1/4 x 6 - 8% cobolt, flat slab oil stone 25 x 52 x 150 mm, hss centre drill dia 4.0 mm, hss machine reamer ( straight shank)dia 6 - 10 mm., hss hand reamer with wrench - dia 6 - 10 mm, power hacksaw machine with blade (10nos.)., hss tap set for size m4 - m12 with wrench (set) & core drills for the above tap set, taper shank hss drill dia 20mm, taper shank hss drill dia 16mm, taper shank hss drill dia 14mm, clamp c 10 , clamp c 5 , too

Central Government/Public Sector

CTN :45002749

16 May, 2026 1.22 Crore

Jaduguda - Jharkhand

Tender For annual civil maintenance and development works in ucil housing colony jaduguda for one year d d - earth work in excavation , filling available excavated earth , filling in plinth with sand , dismantling old plaster , demolishing cement concrete , cleaning jungle , demolishing brick work , plain cement concrete 1 isto 3 isto 6 , plain cement concrete 1 isto 2 isto 4 , reinforced cement concrete work 1 isto 1 5 isto 3 , steel reinforcement , brick work foundation and plinth , brick work in super structure , half brick masonry , 12 mm thick cement plaster 1 isto 6 , 15 mm thick cement plaster , 12 mm thick cement plaster 1 isto 4 , 25mm thick cement concrete flooring , the overhead tank , asbestos cement sheet , g i sheet in roofing , structural steel work , 35mm thick isi marked flush door , 24 mm thick factory made pvc door shutters , white washing , water proofing cement paint , premium acrlic smooth exterior paint , white cement based putty , acrylic emulsion paint , cleaning of overhead water tank , renewing glass panes , paver block , vitrified tiles , ceramic glazed wall tiles , orissa pattern w c pan , european type w c pan , white vitreous china wash basin , vitreous china wash basin , mirror of superior glass , flushing cistern , low level cistern , pedestal type w c pan , 15 mm bided or jet spray , c p brass shower rose , c p brass angle valve , brass stop cock , close hole wall mixer tap , 75 mmwaste and vent pipes , 100 mm waste and vent pipes , 75 mm plain bend , 100 mm plain bend , 15 mm g i pipes , 20 mm g i pipes , 15mm normal bore g i union , 20 mm normal bore g i union , c p brass extension nipple , p v c waste pipe 32 mm dia , c p brass bib cock , brass bib cock , brass extension nipple , ball valve , renewal of old putty , excavating trenches , surface dressing , transportation of excavated earth , foundations or footings or bases of column etc. for mass concrete , lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers , water proofing treatment , synthetic enamel paint , cement primer , chain link , 18 mm thick granite

CTN :44925811

08 May, 2026 NA

Nagpur - Maharashtra

Tender For supply of lpg work e e - sitc of lpg cylinder adaptors , sitc of gi lpg pipeline installation , sitc of suraksha lpg hose , sitc of gas pressure gauge , sitc of non return valve , sitc of gi ball valves , sitc of three burner stove , sitc of lpg regulator , sitc of cylinder manifold cage , sitc of flexible ss pigtails , sitc of sitc of manifold header pipe , sitc of sitc of cylinder connecting nipples , sitc of pilot line with isolation valve , sitc of gas flow meter optional , sitc of exhaust fan , sitc of auto-clean chimney , sitc of inline duct fan , sitc of exhaust fan louver , sitc of gi ducting , scaffolding , four number ms steel table top finished by granite stone ) /bid number : gem/2026/b/7447123 * /dated: 17-04-2026 & & / bid document 1 / 24

CTN :44690306

04 Apr, 2026 5.99 Lacs

Kurnool - Andhra Pradesh

Tender For providing and laying water proofing treatment for terrace by replacing old brick lime mortar treatment new plinth protection around the building external minor repairs and painting for walls in kendriya vidayalaya school at kurnool andhra pradesh sh painting of interior walls of class rooms in first floor of kv school kurnool ap

Loading, Please wait...

Lime Mortar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector