Get complete information related to latest Lime Quick Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lime Quick Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lime Quick Tenders.
Tender For supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by the contractor.
Tender For supply of pwd material others as per list for financial year 2026-27 - financial rates per unit for the financial year 2026-27: sand, gravel (10 mm), stone chips (6 mm), gravel (20 mm), gravel (40 mm), isi-grade cement (major brands), black sand, hard murram, banda, black soil, brown soil, corrugated sheets, coated sheets, iron reinforcement bars (6 mm isi), iron bars (8 mm), iron bars (10 mm), iron bars (12 mm), iron bars (16 mm), iron flat bars, wire mesh, lime wash, ochre wash, asian distemper, asian oil paint, bricks (class 1, 2, 4), cement sheets, ready-mix asphalt, turpentine, clay bricks, jcb machine, poclain machine, centering materials (rental), vibrator (rental), concrete mixer, lorry/truck, white cement, formwork, tiles, marble stone, 9-inch bricks, 12-inch bricks, 18-inch bricks, [pipe sizes] 1/2", 1", 3/2", 3/4", 2", 3", 4", pop (plaster of paris), granite, water tanker (3000 liters), water tanker (4000 liters), water tanker (6000 liters).,hume pipe np2 -100 mm, hume pipe np3-100 mm, hume pipe np4-100 mm, hume pipe np2-125 mm, hume pipe np3 np4-125 mm, hume pipe np4-125 mm, hume pipe np2 -150 mm, hume pipe np3 -150 mm, hume pipe np4-150 mm, hume pipe np2-300 mm, hume pipe np3 -300 mm, hume pipe np4-300 mm, hume pipe np2 -350 mm, hume pipe np3 -350 mm, hume pipe np4-350 mm, hume pipe np2 -400 mm, hume pipe np3 -400 mm, hume pipe np4-400 mm, hume pipe np2 -450 mm, hume pipe np3 -450 mm, hume pipe np4-450 mm, hume pipe np2 -500 mm, hume pipe np3-500 mm, hume pipe np4-500 mm, hume pipe np2-600 mm, hume pipe np3 -600 mm, hume pipe np4-600 mm, hume pipe np2-900 mm, hume pipe np3 -900 mm, hume pipe np4-900 mm, hume pipe np2 -1000 mm, hume pipe np3 -1000 mm, hume pipe np4-1000 mm, hume pipe np2-1200 mm, hume pipe np3 -1200 mm, hume pipe np4 -1200 mm, hume pipe np2-1400 mm, hume pipe np3 -1400 mm, hume pipe np4 -1400 mm, rcc 3 seater color cement bench, rcc 3 seater garden bench, multicolor wall painting work with primer & scrapping comlete as directed by eng. encharge, multicolor wall writing work, multicolor wall art work 3d/graphity/realistic with primer & scrapping comlete as directed by eng. encharge, multicolor wall art work traditional with primer & scrapping comlete as directed by eng. encharge, hige altittude wall painting work, murals 2d with material,painting and fixation as directed by eng. encharge, murals 3d with material,painting and fixation as directed by eng. encharge
Tender For corrigendum : supply of 3d printed continuous glass fiber reinforced concrete panels as per the ts , steel lintels for 2 openings above loopholes and 3 above door , box sections of size 100x100x5mm cut to length , 10mm and 12mm tmt bars , pcc solid block or class a bricks , stone patti slab each of size 600x300x50mm thick , paver block m 20 grade and 50mm thickness , flexible polyurethane foams sealant 750ml , eaterior weather proof paint , ms loop hole of size 900x400mm drawing duly painted with two coats , ms door of size 900x1850mm drawing duly painted , sand bag 18inchx34inch hdpe , pbs roll 20m x 1m , bitumen primer , well graded sand , all in one aggregate , 0 point 5mm thick cgi or metal deck or ppgi sheets for roof casting of size 20ft x 4ft , 12 mm and 20 mm tmt rebar fe 500 grade , binding wire , steel cutting blade 4 inch dia , opc oblique ppc 53 grade cement , distemper oil emulsion , three tier bunk bed , toilet accessories including ews and shower and hand wash and septic tank
Tender For corrigendum : supply of grade primer for roof treatment , synthetic enamel paint colour , turpentine oil , loop holes of size 600x500mm frame angel iron 50x506mm and 45x45x6 mm and flat iron 40x6 mm covered , steel door of size 900x1800 mm angle 50x50x6 mm ms sheet 2mm thick iron 25x4 mm opening 900mmx250mm , lightning conductor made of copper tube 150 cm long x 25mm dia prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick , shredded rubber 150 mm crumb rubber tiles size 500 x 500 x 50 mm , 75mm dia pvc pipe , pvc single core 1 point 5 sqmm , pvc single core 2 point 5 sqmm , cable pvc insulated and pvc 1100v , pvc conduit pipe round shape 50 mm dia and 3 point 00 mm , pvc l bend for 20 mm , pvc t 20 mm , pvc square box 4 inch x 4 inch , pvc elbow 20 mm dia , dry wall screw 50 mm , mcb single pole 230v ac and 50 hz and 6 ampc and 10 amp , switch piano flush type15 amp and socket multi purpose 5 or 15 amp piano type with gang box , pvc ceiling rose 2 or 3 terminal , insulation tape 25 mm width 9 mtr , distribution box mcb box 12 way , stainless steel u clamp for 20 mm pvc , isolator 63 amp dp , earthing of building provided using 3 mm dia of size 60cm x 60cm x 6mm of size 45cm x45cm over , pvc t 20 mm for conduit pipe , dry wall screw 50 mm long , mcb single pole 230v ac and 50 hz and 6 ampcand 10 amp , insulation tape 25 mm width 9 mtr long , distribution box 12 way , isolator 63 amp , earthing of building provided using 3 mm dia gi earth plate of size 60cm x60cm 6mm thick 25kg wood , generator set 15 kva silent diesel engine driven , armored pvc sheathed 16 sqmm , plastic dividing strip 3 mm thick , precast cement concrete hollow block masonry , hardcore broken stone boulder exc 40mm and n exc 63mm , fire extinguisher dry powder type , change over switch 4 pole and 415 volt and 100 amp , wiremesh for serving sand 8 feet x 5 feet with wooden frame , trowels as per isi mark , plumb bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr , measuring tape 30 mtr , drilling machine , tool kit for electrician
Tender For corrigendum : supply of supply of gravel granular gsb 250mm 125mm low grade aggregates , supply of geo textile of size 4 point 5mtr x 100rm over gsb with min 300mm stone aggregate as in drain , supply of geo grid of size 4 point 5mtr width x 100rm below gsb with min 300mm stone aggregate as in drain , opc 53 grade cement , sand for coping , aggregate 20mm , supply only fine sand , supply only water based prepolymer urethane , supply of paver block siz 225mm x112 point 5mm x100mm , rubber hammer , brick trawel , pan mortar std size , hand gloves rubber , digital compression testing machine , spacer clips , special mask for chemical laying , wire mess for seiving sand 8 feet x 5 feet , phawrah with handle make , measuring tape 5 m ai 16 , water level pipe 30mtr roll , mason thread 100 mtr long roll , sprit level 10 inch , broom sticks , concrete saw electric
Tender For supply of materials for mgnregs works in various wards of varapuzha grama panchayath - supply of materials, stone for masonry work, through and bond stone size 24 x 24 x 39cm, sundries, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wall form panel 1250x500 mm, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, double clip (bridge clip), single clip, m.s. tube 40 mm dia, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, water, well graded material for sub base grading i, 53 mm to 9.5 mm below @ 50 percent, well graded material for sub base grading i, 9.5 mm to 2.36 mm below @ 20 percent, well graded material for sub base grading i, 2.36 mm below @ 30 percent, interlocking c.c. paver block (80 mm thick, m-30), stone aggregate(single size): 06 mm nominal size, stone aggregate(single size): 40 mm nominal size, second class kail wood in planks, second class kail wood in scantling, twisted steel/deformed bars, solid blocks of size 30x20x15cm, fine sand (zone iv), mild steel tubes hot finished welded type, red oxide zinc chromate primer, welding by electric plant, synthetic enamel paint in black or chocolate shade, gi trafford profile sheet 0.35mm thick, bitumen washer, g.i limpet washer, galvanised steel j or l hooks 8 mm dia, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc bend 63 mm dia
Tender For bsly - material supply for various mgnregs works in bisonvalley grama panchayath - meterial supplay, stone aggregate (single size)20mm nominal size(m3), stone aggregate (single size)10mm(m3), coarse sand (zone iii)(m3), portland cement(tonne), hire charges of concrete mixer 0.25 to .40 cum with hopper(day), vibrator (needle type 40mm)(day) - meterial supplay, stone aggregate (single size)20mm nominal size(m3), stone aggregate (single size)10mm(m3), coarse sand (zone iii)(m3), portland cement(tonne), hire charges of concrete mixer 0.25 to .40 cum with hopper(day), vibrator (needle type 40mm)(day)
Tender For mgnrega road work - materials items, stone for masonry work, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wall form panel 1250x500 mm, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, quarry waste, stone for masonry work
Tender For supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, stone aggregate(single size): 10 mm nominal size, solid blocks of size 10x20x15cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, red oxide zinc chromate primer, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, fine sand (zone iv), galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, mild steel hot finished welded type, welding by electric plant, average rate of mild steel round bars for reinforcements, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick