Latest limestone Tenders | Government limestone Tenders

CTN :45742319

10 Jul, 2026 6.56 Lacs

Ghazipur - Uttar Pradesh

Tender For supply of limestone powder (ongc) (q3)

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45721059

01 Jul, 2026 50.00 Lacs

Bharatpur - Rajasthan

Tender For corrigendum : estimated cost of construction materials required for mgnrega and other schemes for the financial year 2026-27. - close graded gsb material as pert table\400.a, aggregates 45 mm to 2.8mm, aggregates 6 mm nominal size, stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve., cost of water, / / , - / , , , . . ., , fine , / , - /local, (fly ash), , ( , ), / (for other than road work), 40mm ( )( 1/11), 40mm ( )( 1/11), 20mm ( ), 12/10/6mm ( ), , (5 . ), 63-40 ( 1/11), 63-40 ( 1/11), 90-45 . ( 1/11), ( 1/6), ( 1/6), ( 1/6), (pi 4-6)( 1/6), (22.5 x 11 x 7.50 cm), (i st class), (ii class), / / , (rr), (cr), (15cm ), (23cm / ), / / ( 2-3, 10-12", 2.5-3.5"), (flaky material)(3-4" thick & length and width 1-2"), (dpc,sill,coping,lintel,tand,almirha etc), 25mm , 25-40mm , 40-50mm , 50-75mm , 75-100mm , 100-150mm , / , upto 35mm thick, min. 3 sqft or more area, 60-75mm , min. 3 sqft or more area, , 900 , 901 2300 , 2300 , ( ), 900 , 901 2300 , 2300 , ( 20mm ), 900 , 901 2300 , 2300 , , , ( ii quality/ 20mm ), 900 , 901 2300 , 2300 , , 100 x 75 ., 125 x 75 ., , up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4 m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles / blocks, glazed size-30x45 cm, mosaic size-40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, isi marked, 1.50 . ., 2.50 . ., 0.50 . ., 1.00 . ., 4.00 . ., 6.00 . ., ( , ), , , vu;, (30 mm , ), , ( fe 415/500 ), 18 , , / / / , (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , (24 , 14 ), 40 , , 3 . . , - , , (water bound), - ( / ), ( / ), , hsd, , (25 mm thick), ( ), . . 22 (0.80 mm), . . 24 (0.63 mm), . . 22 (0.80 mm), . . 24 (0.63 mm), , . . 1 . . , . . 22 (0.80 m.m.), 6mm(2.5/2.75x1m), , . . . 1 mm ( / ), (183x90), , . . 15 . . (b class), . . 20 . . (b class), . . 25 . . (b class), . . 75 , . . 100 , . . . 90 . . ( ), . . . 110 . . ( ), . . . 140 . . ( ), . . . 110 . .(2.5kg/sq.cm) , , indian w.c., orrisa w.c., european w.c., (foot rest), (urinal) 430*350*300mm , . . . , (wash-basin )450*300mm , . . . , (s.w.) 100 m.m. , 0.6 . , . . (dia 15 mm) (is mark), . . (dia 15 mm)(is mark), 125 . . . . (grating), . . . np3 , 1200mm , 1000mm , 750mm , 600mm , 450mm , 300mm , isi marked, 20 . . , 25 . . , , . . . ( (is:12701-1989 ), 13/0.20 . . , , 6 x 75 , isi marked, 25 . . , 20 . . , , 20 . . , 20 . ., , 25 . . , 20 . . ( ), , 3 , 2 , , 2 , 3 , , isi marked, 15/16 , 5/6 , , isi marked, 3 5/6 , 6 15/16 , , 2+2 , , , 2+4 , , , 2+6 , , , ( ), 15.00 . . , 40.00 . . , 8 swg (4.00 . . ) (0.117 / .), / , , 8 10 , , 9 , (25-40 hp), , 4000 , 5-7 , 15 . ., niddle/plate , / , ( , ), compressor, hydrolic excavater/jcb (bucket capacity 0.4cum), , , , , , , , , , , , , , , ( ), ( , ), ( 3 , 75 ) , , , , wet mix plant @ 75 tonne capacity per hour, generator 250 kva, water tanker 6 kl capacity 5 km lead with one trip per hour, front end loader 1 cum bucket capacity, tipper 10 tonne capacity, add 10% of cost of carriage to cover cost of loading and unloading, motor grader 110 hp, vibratory roller 8-10 tonne

CTN :45721075

01 Jul, 2026 50.00 Lacs

Bharatpur - Rajasthan

Tender For corrigendum : estimated cost of construction materials required for mgnrega and other schemes for the financial year 2026-27. - close graded gsb material as pert table\400.a, aggregates 45 mm to 2.8mm, aggregates 6 mm nominal size, stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve., cost of water, / / , - / , , , . . ., , fine , / , - /local, (fly ash), , ( , ), / (for other than road work), 40mm ( )( 1/11), 40mm ( )( 1/11), 20mm ( ), 12/10/6mm ( ), , (5 . ), 63-40 ( 1/11), 63-40 ( 1/11), 90-45 . ( 1/11), ( 1/6), ( 1/6), ( 1/6), (pi 4-6)( 1/6), (22.5 x 11 x 7.50 cm), (i st class), (ii class), / / , (rr), (cr), (15cm ), (23cm / ), / / ( 2-3, 10-12", 2.5-3.5"), (flaky material)(3-4" thick & length and width 1-2"), (dpc,sill,coping,lintel,tand,almirha etc), 25mm , 25-40mm , 40-50mm , 50-75mm , 75-100mm , 100-150mm , / , upto 35mm thick, min. 3 sqft or more area, 60-75mm , min. 3 sqft or more area, , 900 , 901 2300 , 2300 , ( ), 900 , 901 2300 , 2300 , ( 20mm ), 900 , 901 2300 , 2300 , , , ( ii quality/ 20mm ), 900 , 901 2300 , 2300 , , 100 x 75 ., 125 x 75 ., , up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4 m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles / blocks, glazed size-30x45 cm, mosaic size-40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, isi marked, 1.50 . ., 2.50 . ., 0.50 . ., 1.00 . ., 4.00 . ., 6.00 . ., ( , ), , , vu;, (30 mm , ), , ( fe 415/500 ), 18 , , / / / , (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , (24 , 14 ), 40 , , 3 . . , - , , (water bound), - ( / ), ( / ), , hsd, , (25 mm thick), ( ), . . 22 (0.80 mm), . . 24 (0.63 mm), . . 22 (0.80 mm), . . 24 (0.63 mm), , . . 1 . . , . . 22 (0.80 m.m.), 6mm(2.5/2.75x1m), , . . . 1 mm ( / ), (183x90), , . . 15 . . (b class), . . 20 . . (b class), . . 25 . . (b class), . . 75 , . . 100 , . . . 90 . . ( ), . . . 110 . . ( ), . . . 140 . . ( ), . . . 110 . .(2.5kg/sq.cm) , , indian w.c., orrisa w.c., european w.c., (foot rest), (urinal) 430*350*300mm , . . . , (wash-basin )450*300mm , . . . , (s.w.) 100 m.m. , 0.6 . , . . (dia 15 mm) (is mark), . . (dia 15 mm)(is mark), 125 . . . . (grating), . . . np3 , 1200mm , 1000mm , 750mm , 600mm , 450mm , 300mm , isi marked, 20 . . , 25 . . , , . . . ( (is:12701-1989 ), 13/0.20 . . , , 6 x 75 , isi marked, 25 . . , 20 . . , , 20 . . , 20 . ., , 25 . . , 20 . . ( ), , 3 , 2 , , 2 , 3 , , isi marked, 15/16 , 5/6 , , isi marked, 3 5/6 , 6 15/16 , , 2+2 , , , 2+4 , , , 2+6 , , , ( ), 15.00 . . , 40.00 . . , 8 swg (4.00 . . ) (0.117 / .), / , , 8 10 , , 9 , (25-40 hp), , 4000 , 5-7 , 15 . ., niddle/plate , / , ( , ), compressor, hydrolic excavater/jcb (bucket capacity 0.4cum), , , , , , , , , , , , , , , ( ), ( , ), ( 3 , 75 ) , , , , wet mix plant @ 75 tonne capacity per hour, generator 250 kva, water tanker 6 kl capacity 5 km lead with one trip per hour, front end loader 1 cum bucket capacity, tipper 10 tonne capacity, add 10% of cost of carriage to cover cost of loading and unloading, motor grader 110 hp, vibratory roller 8-10 tonne

Central Government/Public Sector

CTN :45244663

10 Jul, 2026 NA

Delhi - Delhi

Tender For corrigendum : expression of interest for selection of technology partner qfgdm associate for upcoming wet limestone based flue gas desulphurisation system

Central Government/Public Sector

CTN :45519085

07 Jul, 2026 NA

Jharsuguda - Odisha

Tender For corrigendum : bhel/cpc/ctan/epc-chp-lhp/27/021- epc package for coal handling plant and limestone handling plant for bcgcl

Central Government/Public Sector

CTN :45563196

01 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : procurement of spares of limestone and gypsum slurry handling pumps forfgd area for bmd, ntpc lara.. - as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet, as per long text in technical datasheet