Latest limiting valve spares Tenders | Government limiting valve spares Tenders

CTN :44882125

22 Apr, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, bobrmn1, boxnm1 & bcnm1 wagons no as following: [1] ser 25079617706 boxnr [2] er 72029660404 bobrnm1 [3] ser 10079666960 boxnm1 [4] nr 30038961066 bcnm1 [5] cr 30019060320 bcnm1 [6] er 30029020147 bcnm1 [7] cr 30019160457 bcnm1 [8] ser 30079160251 bcnm1 [9] er 30029125682 bcnm1 [10] ser 10079646511 boxnm1 [11] ser 10079662764 boxnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (132.180 mt) is the lot quantity (132.180 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowedinside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnm1 & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :44882287

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.

Central Government / Public Sector

CTN :44815691

15 Apr, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 31326030120 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, bcn m1 boxnr , bobrn m1 .available on rails. 1) er bcn m1 30029060266,2) scr bcn m1 30099082380 ,3) er bcn m1 30028860355 ,4) ser boxnr 25079662164 ,5) er bobrn m1 72029681010 . location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. casnub bogies with all fittings, 9. distributor valve,, 10 .sab 11.yoke pin support (1st plate),12. safety plate with anchor plate (2n d plate 13. yoke support plate(3rdplate),14.cut of angle cock,15.yoke pin,16)draft gear followers,17.knuckle pin.18.knuckle thrower.19.back stopper.20.bcn flap,21.bronze buishes ds8no:0999603120. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 64.728 .mt (m.s -60.542, ss-4.186) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :44720002

09 Apr, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- lying at bg-6 in scrap yard judw. remarks- [1]loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery

Central Government/Public Sector

CTN :44719984

09 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting, ms and gi nut bolt revet, signal lever, head stock assembly,rail screw, ms angle below 1 feet,draft gear,foot step,punji,end cover, screw coupling,buffer plunger,bridle bar,coupler yoke, and all type of signal melting,signal rod piece below 3 feet, screw rod,joggle fish plate,switch fittings,switches,slide chair bearing plate,gauge tie plate, stretcher bar,gilmet,air brake cylinder complete and loose,axle cover,knuckle,dv,cp top, and bottom, shackle,empty box iron,boxes,ms round,ms pipe ms bar,ms pully, coupler rod,lashing chain,signal lever,beater, buffer socket, phawrah,coupling shaft ,iron strips,d valve,empty rru and similar box,brake beam, shocker , truss bar, striker casting,ms jali,ms small angle, shocker crow bar,axle box housing,shackle, pu pad cover,pull and push rod,side bearer housing, hand brake wheel, equailising lever,sab part, lever, erc all type jack,brake beam, isolating cock ,drain cock,bp/fp angle cock,bend plate,wiper arm safety shoe,clamp bracket,operating handle flange,sand injactor body, band plate,all type of heavy melting category similar items with or without undetachable nf attachment .note-while delivery if any other non ferrous or non similar items found in the lot will not be delivered.qty.on approx basis.

Central Government/Public Sector

CTN :44670951

31 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 95.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolster spring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only

Central Government/Public Sector

CTN :44670956

31 Mar, 2026 NA

Multi City - Gujarat

Tender For corrigendum : auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 45.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolster spring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only

Central Government/Public Sector

CTN :44670903

06 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - 98200070: cond. & u/s. brass scrap consisting of brass direct clamp,brass large catenary bracket parts, water mixture tap, standard catenary bracket, bolt, nut, brass cuttings,bearing cage, electric loco parts,fuel valve,different type of valve,bush, ring,contact splice,brass rods, brass cuttings,brass shunt,safety value,brass reverser bit parts ,prv plunger,phgr dummy,arching horn, binding nut/plain nut, impellers, lever assembly,ss rope ending cone,suspension bracket large,catenary suspension clamp,swivel clip,catenary ending cone,catenary splice,contact wire dropper clip,different types of pg clamps,catenary wire dropper clip, spring bit holder, bracket, lever assembly and such other similar items with or without ferrous, nonferrous and other attachments as is where is condition. note: pick and choose not allowed. location:in tub no.5,6,17,18 of ward 04/ssd/ptj.

Limiting Valve Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector