Latest line shaft Tenders | Government line shaft Tenders

State Government

CTN :41249845

13 Aug, 2025 84.52 Lacs

Banaskantha - Gujarat

Tender For supplying and providing spare parts for pumps(no 1,2 and 3) and induction motors at bhadath pumping station included in changa dantiwada pipeline project. - providing spares for horizontal split case pump make: wpil, rpm-750, discharge - 5100 cum/hr, head - 42 m no of stages – two and induction motor make-jyoti ltd. capacity- 750 kw at bhadath pumping station for changa dantiwada pipeline project, providing and supplying pump shaft including loading, unloading, freight unit approved rates, providing and supplying sleeve( line shaft) including loading, unloading, freight unit approved rates, providing and supplying bearing 6222 c3 including loading, unloading, freight unit approved rates, providing and supplying pump bearing housing loading, unloading, freight rates as per rate analysis no. 1, providing and supplying wear ring (impeller) loading, unloading, freight unit approved rates, providing and supplying wear ring (casing) loading, unloading, freight unit approved rates, providing and supplying pump impeller including loading, unloading, freight rates as per rate analysis no. 1, providing and supplying bearing nu 324 c3 including loading, unloading, freight unit approved rates, providing and supplying bearing nu 326 c3 including loading, unloading, freight unit approved rates, providing and supplying bearing 6324 c3 including loading, unloading, freight unit approved rates, providing and supplying isi mark di d/f sluice valves as per is:14846 (latest edition) of following class and diameter including all taxes, insurance; transportation, freight charges, octroi, inspection charges, loading, unloading.conveyance to departmental stores, stacking etc. complete. (pn-1.6 with manually operated through gear box, non rising valve) dia 1000 mm rates as per rate analysis no. 2, providing and supplying battery set with float cum boost charger 200 ah, 2 v dc, model- upst including all taxes, insurance; transportation, freight charges, octroi, inspection charges, loading, unloading.conveyance to departmental stores, stacking etc. complete. rates as per rate analysis no. 2

CTN :41242658

19 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of servo motor control valve, running time meter, 1-4 mxpu4 elbow, frp filter od 137, solenoid valve, sampling cock, seal ring, filter and permeate pump casing, o ring, shaft seal, casing p-1, i b bearing p-16, o.b. bearing p-18a, circlip internal p-18b, oil level viewer p-19d, bearing lock out p-22, o-ring bearing housing p-33b, deflector p-40, breather p-45, lip seal i.b. p-47, lip seal o.b. p-49, mech seal p-60, bearing lock washer p-69, cover gasket p-73, bolts p-171d, foot bolt p-171g, flexible hose h.p.feed inlet, chi 2-40 shaft seal, pressure tube 1000l, pressure switch, bearing ring p- 47a, spacing pipe -p - 64.c, slotted nut p - 67, pump head for pump p-2, stay bolt for pump p - 26, chamber complete p - 4, neck ring p - 45, neck ring retainer, chamber with bearing ring p - 4a, spacing pipe - p - 64.a, wear part kit - repair kit, ball bearing d244 p153, ball bearing p- 154, shaft pin p-10, chamber, o-ring 16.3 od x 2.4 thk, o-ring 137.5 od x 3.3 thk, chamber complete, chamber, neck ring, neck ring retainer, bearing ring, spacing pipe 17.52l, spacing pipe 4.50l, washer, 8.20id x 13.50od, shaft seal, impeller, shaftseal p-105, ball bearing p-153, anode plug, rod connecting assy, plug for priming, spacer v-packing p-157, o ring over hauling kit, piston set, retainer set, seal kit, seal ring, charging screw, charging plug screw, head distributor 3-4 air connection, o ring for head distributor assembly, cartridge filter housing, cartridge filter head, o ring hydraulic disc, solenoide valve actuator, 3 way ball valve, hp straight conn .3-4 for smcv, connector 1 1-4 bsp f x 1 1-4 vivt, vict end connector 1 , module bypass nozzle, victaulic couplings 1 1-4, victualic coupling 1. 1-2, coupler for vict. coup.1, victualic couplers 1. 1-2, permeate male elbow, smcv spindle seat, smcv valve unit for 3-4 valve, smcv valve spindle unit, servo motor control valve, solenoid valve 3-8 f 2-way ve83, solenoid valve actuator, ball v/v brass 1-4 bspf chrome plated, compressed air regulator, control cabinet ro 1530, door stay for cabinet, circuit breaker 1.6-2.5amp, circuit breaker 1.6-2.5 amp, thermister over load relay, single phase protector, hrc fuse 2 amp, hrc fuse 25 a, hrc fuse-bs-3nw 415vac 32 amp, main control switch 63a, potention meter, running hour meter, pressure gauge 0-10 bar, pressure transmitter, hand conductivity meter, flow meter feed, flow switch, sand filetr bracket, lp hose 32mm, hp line pressure gauge pi 61 hp pump discharge, hp hose 3-8id 1 2unfmx1 2unffx800l, high pressure hose module outlet, hp hose of module in, hp hose 1 idx1-vicx1500l saf 2507, lp hose hp pump inlet, pulley for motor 2 groove, pulley for pump 2 groove, seal kit, ho pump seat kit, taper bush 1610 20 mm bore, taper bush for motor pulley, wedge belt, av mount akcc 85m, av-mount between main frame and hp pumpbase frame, hp pump crank case oil, allen key set, socket dt module, belt spanner, jubilee clips for d 25, membrane cleaner 22, membrane cleaner 55, h.p connection - feed-brine, high pressure transmitter 4 to 20 ma pt60, high pressure manifold 6 x 1, rubber hose from c-f outlet to hp pump inlet 20-30tpd, abs service kit ro 200-102, abs service kit - 40 tpd, e-spare kit ro 0510-510, filter pump motor bearing pump end , hp pump seal kit, hop pump valve kit, hose for pk-20 pump in-out, level switch

CTN :41284649

08 Aug, 2025 NA

Durgapur - West Bengal

Tender For repair of line shaft for roller screen

CTN :41259167

06 Aug, 2025 NA

Multi City - Multi State

Tender For procurement of spares for wpil ltd make waste service water transfer pump and potable water pump for offsite maintenance at munpl 2x660 mw - suction bell pump ,part no.2, brg suction bell pump ,part no.3, intr. bowl brg pump ,part no.9, discharge case pump ,part no.11, brg discharge case pump ,part no.12, screw brg discharge case p/p,part no.13, tubing adoptor pump ,part no.14, screw brg discharge case p/p,part no.15, pump shaft pump ,part no.17, pump shaft coupling pump ,part no.18, line shaft tube bott part 20, tube stabilzer pump ,part no.22, screw brg line shaft pump ,part no.23, line shaft sleeve pump ,part no.24, line shaft coupling pump ,part no.25, line shaft tube inter pump ,part no.28, tube tension nipple of pump ,part no.35, head shaft with key of pump ,part no.36, tt nut com.plate of pump ,part no.37, brg tt nut of pump ,part no.38, adjusting nut of pump ,part no.46, bottom line shaft part no 21, discharge /case pump m:em12tc/06 stg, packing box pump m: em12tc/06 stg,., packing gland pump m: em12tc/06 stg,.

CTN :41232551

06 Aug, 2025 NA

Purnia - Bihar

Tender For supply of toggle joint gd and pt , deadman switch for telescopic boom , centering arm 108680 carousel , 14 teeth sprocket , anteena valve 5-2 type spring return valve , 8 teeth sprocket , shaft size60mm x 650 mm en-8 , shaft size40mm x 380 mm en-8 , ss pressure guage 6 inch dial gycerine filled 0-100 kg per cm2 , pneumatic cylinder size 50mmx80 smc , display for mark iv kosan cuc card , lpg hose of length for gas stop valve of kosan make carousel parker make , lpg hose of length for filling scale of kosan make carousel parker make , lpg hose of length 1.5 m parker make , lpg hose of length 1 m parker make , lcn -m5-pk-3 festo , key pad for markiv ss plate , rivet type conveyor chain , portable hot air seal machine gun head , hot air sealing unit head hose length 1 m , ejection unit positioning arm left side , load cell 200kg flintec , l bend for filling gun , plummer block ucp 212 ntn , wt 24-2x400 diffuse sensor sick , portable hot air seal machine hose 3m length , ss plate for telescopic boom 1 m length , pneumatic cylinder 32 x 250 mm smc , center section gd-pt , double stopper arms kosan type set , ejection arms head , introduction uhm pad , pneumatic fitting lck 1-4 pk 8 , pneumatic fitting lck 1-4 pk 6 , pneumatic fitting lck 1-8 pk 4 , pneumatic fitting lck 1-8 pk 6 , pneumatic fitting lck 3-8 pk 8 , pneumatic fitting lck 1-2 pk 12 , manual filling gun siraga , ss hex nut bolt 10 x 40 mm , ss hex nut bolt 10 x 50 mm , ss hex nut bolt 12 x 50 mm , counter sunk nut bolt 8 x 25 mm , 5-2 pull push type valve janatics , 3-2 pull push type valve janatics , spm 10x15 pneumatic small cylinder , guide rod for gdpt base , brass bracket block for gd-pt base , pneumatic cylinder 63-25 for check scale , sensor cable length 1 m ) /bid number : gem/2025/b/6502220 * /dated: 27-07-2025 & & / bid document 1 / 34

State Government

CTN :41234048

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.

State Government

CTN :41234051

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234052

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of vt pump (raw water) and accessories at gumuria rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-7.5 hp approx as per is 1710, capable of discharging 24.5 m3/hr against a head of 30 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, foot valve, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -24.5 m3/hr and head - 30m (1w + 1s) 7.5 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 7.5 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards jointing newly installed pump motor set to the existing header., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63 a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, phase indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 6 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234055

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of c/f pump(clear water) and its accessories at gumuria rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-40hp as per is:5120, capable for discharging 30 m3/hr against a head of 101 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, ms delivery & suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -30 m3/hr and head - 101 m (1w + 1s) 40 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 40 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 200 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100 a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 25 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

Central Government And Public Sector

CTN :41194292

14 Aug, 2025 NA

Surat - Gujarat

Tender For supply of line shaft muff coupling (sleeve type) including keys and split rings, part no: 15 , pump and motor coupling pin (with nut and washer) , part no: 31, material: 40c8, make: m/s jyoti ltd , pump and motor coupling rubber bush, part no: 32, material: rubber+ 40c8, m/s jyoti ltd, model: 800vm , line shaft sleeve, part no: 13, material: ss410h, model: 800 vm, make: m/s jyoti ltd

Line Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government And Public Sector