Latest lineman tools Tenders | Government lineman tools Tenders

corporations/Associations/Others

CTN :45614597

30 Jun, 2026 1.99 Lacs

Kolkata - West Bengal

Tender For supply and fitting, fixing of new spindle, gm nut and other allied components of 700 mm dia. delivery sluice valve of pump no.-3 at rwps ph-i of grww. - disconnect the electric line from the motor andopen out the same from its position and keep it insafe position., dismantling the gear box part by part and store thecomponents in a safety place to avoid any damaged., open out the cover plate of the valve by using gascutter, electric welding etc., dismantling the valve by open out distance piecegland, top cover, lead nut valve , etc., mfg., supply, fitting fixing of lead screw as persample., mfg., supply, lead nut as per sample., machining the valve shutter after removing olddilapidated ring., mfg., supply, fitting, fixing of g.m ring for valvebody(02 nos.)., mfg., supply, fitting, fixing of g.m ring for valveshutter(02 nos.)., supply and delivery of skf make bearing no. 6317, supply and delivery of skf make bearing no. 51311, complete lapping and matching the valve and valveshutter by rubbing compound after necessarymachining to make the valve leak proof., re-assy. the valve by fitting, fixing, of shutter, topcover, gland cover, cover plate, etc., fitting, fixing of pedestal gear box, gear, gearspindle one by one and make the unit suitable foroperation., installation of valve in the delivery line with thehelp of special type of tools & tackles weldingmachine and gas cutter etc., fitting, fixing of motor with all accessories., sub total, gst 18%, cess 1%

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

Central Government/Public Sector

CTN :45338871

22 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of rubbing plate for bolster suspension drawing no: emu/m-0-5-017 alt g/6, item no 2. spec. no : rdso spec no c - 8401. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

Central Government/Public Sector

CTN :45255001

02 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of rubbing plate for bolster suspension to icf drg no:emu/m-0-5-017 alt g/6 (column ii). material conforming to rdso specn:c-8401 for use in conventional motor coaches. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45200598

22 May, 2026 4.20 Lacs

Mahabubnagar - Telangana

Tender For supply and delivery of garden and elctrical lineman tools in parks and in divisions nos: 1,2,3,4,5,17,18,19,20,39,41,42,43,57,58 in mahabubnagar municipal corporation

Central Government/Public Sector

CTN :45145857

19 May, 2026 NA

Harnaut - Bihar

Tender For auction sale of depot ferrous scrap - scrap steel casting ( drag boxes centre's castings stretcher casting pivot cbc components, knuckles axle boxes & buffer cases, rubbing blocks etc [our offer- scrap manual uncoupling device, spring loaded supporting device, knuckle, lock, double rotary lock lift assembly, wedge, knuckle pin, front & rear carrier plate, coupler head for muff coupling, restrictor, bdg with coupler head, bracket for muff coupling, scrap face plate for buffer plunger, buffer plunger with and without face plate & spindle, casing, destruction tube, spindle, bent link, screw, draw hook, screw coupling pin, straight link, draft key, draw bar & castle nut, rest beam, draft yoke, centre pivot pin, draw gear pin, end washer, cut rivet, parting plate, nut & bolt etc. ] i lot no.ea982605009 & ea982605011 location-near west & south side of hrs shop floor

Central Government/Public Sector

CTN :45083159

12 May, 2026 NA

Harnaut - Bihar

Tender For auction sale of depot ferrous scrap - scrap steel casting ( drag boxes centers castings stretcher casting pivot cbc components, knuckles axle boxes & buffer cases, rubbing blocks etc [our offer:- scrap compression spring, bracket, cbc main pin, front & rear carrier plate, wedge, spring loaded supporting device, rest plate assembly for four & three spring, base assembly of supporting device of four spring],i lot no. ea982604008, location-near west & north side of hrs shop floor

CTN :44911578

24 Apr, 2026 2.58 Lacs

Mahabubnagar - Telangana

Tender For supply and delivery of garden and electrical lineman tools in parks and in divisions nos: 1,2,3,4,5,17,18,19,20,39,41,42,43,57,58 in mahabubnagar municipal corporation

Central Government/Public Sector

CTN :44380340

10 Apr, 2026 2.51 Crore

Patna - Bihar

Tender For corrigendum : supply of strain pole- quadruple conductor suspension string , strain pole- quadruple conductor tension string , strain poletwin conductor suspension and tension string , quadruple conductor yoke assembly - tension string cold end , quadruple conductor yoke assembly - tension string hot end , quadruple conductor yoke assembly-suspension- i string cold end , quadruple conductor yoke assemblysuspension- i string hot end , adapter- twin conductor yoke assembly for tension string cold end , adapter- twin conductor yoke assembly for suspension- v string hot end , twin conductor yoke assembly- suspension- v and tension string cold end , twin conductor yoke assemblysuspension and tension string hot end , twin conductor yoke assembly- suspension-i string cold end , tongue type strain jack-24 , small trunnion , trunnion gauge , reversible ratchet wrench-prolonged , reversible ratchet wrench- regular , ehv through design insulator cradle , side opening insulator cradle with small hooks- 13 feet , side opening insulator cradle with large hooks- 16 feet , swivel boom- heavy duty , boom support pole , spliced top ladder section- 20 feet , spliced bottom ladder section- 12 feet , swivel stick- 12 feet , swivel stick- 10 feet , swivel stick- 8 feet , spreader bar , ladder clamp , ladder yoke , ladder vertical attachment , ladder horizontal attachment , platform ladder , universal stick- 1 , universal stick- 2 , universal stick- 3 , universal stick- 4 , spiral link stick , wire tong , locating pin , shepherd hook , spiral disconnect , ball socket adjuster regular , swivel boommedium duty , boom extension copper alloy clamp- 3 , boom adapter , capstan hoist- 1000 lbs with bracket and generator , snatch block support , rope separation sticksmall , tower type wire tong saddle , wire tong saddle with extension , bare hand working chair , bare hand stick ) /bid number: gem/2026/b/7188047 * /dated: 09-03-2026 & & / bid document1 / 72 & & ' ' /item categorywith attached clamp , pole clamps , two double and triple blocks with 45 m poly dacron rope , two double blocks with 38 m poly dacron rope , tools rack , swivel hook ladder- 20 feet , composite fiber rope- 1 , composite fiber rope-2 , poly dacron rope- 1 , poly dacron rope- 2 , polypropylene rope-1 , live line rope- 2 , hot clamp , snatch block with forged steel hook- 1250 lb , snatch block with steel meat hook- 1250 lb , snatch block with forged steel hook- 2500 lb , y shape lanyard with large hooks , adjustable work position lanyard , y shape climbing lanyards with small hooks , hand operated hoist with nylon strap- 1 ton , hand operated ratchet hoist- 1and half ton , single ply polyester webbing slings-1 , single ply polyester webbing slings-2 , double ply polyester webbing slings-1 , double ply polyester webbing slings-2 , conductive suit- medium , conductive suit- large , conductive gloves , conductive socks , conductive bootssize- 8 , conductive boots- size- 9 , conductive boots- size10 , bow type screw d-shackle- 1 ton , bow type screw dshackle- 3 ton , bow type screw d-shackle- 5 ton , cordless cutter cum grinder , cordless impact wrench , conductor cart or spacer cycle , handline hook , all purpose cleaner for insulated materials -1 gallon , rope storage containers or buckets- different sizes , lineman tools bag , wiping cloth for insulated sticks , deep metric sockets 12 mm to 32 mm with ratchet and hard case , regular metric sockets 12 mm to 34 mm with sliding tee and hard case , complete tools set includes open end or double ring adjustable wrenche screw drivers pliers etc , tool bucket- large , hot stick tester , ladder monitor kit , fall arrester , fall arrester rope- 12 mm with storage bag , rescue kit includes descender, special rope, webbing slings, karabiners and storage bag , full body harness , insulated static ground , insulated telescopic stick , tarpaulin 10 x 12 , tarpaulin 18 x 12 , hot line tools trailer

Lineman Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector