Latest liner hanger Tenders | Government liner hanger Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

State Government

CTN :45703400

10 Jul, 2026 NA

Jharsuguda - Odisha

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - annual overhauling of c&i equipment’s for - box spanners (mm & inches), size up to 50-min. 4 sets, ring spanners (mm & inches), size up to 50-min. 4 sets, de spanners (mm & inches), size up to 50-min. 20 sets, slide wrench 6", 8"- min. 20 sets, slide wrench 12"-min. 10 sets, pipe wrench 300 mm min. 5 sets, pipe wrench 450 mm min. 5 sets, combination pliers - min. 20 sets, mini connector (taparia make) - min. 20 sets, 1. screwdriver sets-min. 20 sets, - champion set - min. 20 sets, . connector taparia (932) - min. 20 nos, . watchmaker set - min. 5 sets, . junior hacksaw with frame - min. 20 sets, 6. teflon hammer - min. 5 sets, 6. ss tube cutter-min. 5 sets, . slide cutting pliers-min. 20 sets, nose pliers-min. 20 sets, . soldering iron - min. 2 sets, multi meter with all function (fluke) - min. 20 sets, ma source-min. 2 nos, wire stripper-min. 20 sets, flat screwdrivers (small/medium/large) - min. 20 sets, led torch light (good quality)-min. 20 sets, allen key set (mm & inches), normal sizes-min. 20 sets (each), portable drilling machines with bits-min. 3 nos, portable grinding machines with wheels-min. 4 nos, general file set & needle file set-min. 5 sets, chisel set, hacksaw frame with sufficient blades-min. 5 sets, centre & hole punch set; letter & number punch set-min. 3 sets, tap set (6, 8, 10, 12 mm & ", 6", 1")-min, 4 sets each, flaring tool-min. 3 not, pointer puller-min. 3 nos, portable welding set with welding rods-min. 4 sets, hand lamp set (24 vdc)-min 5 sets, hand lamp set (240 vac)-min. 7 sets, power extension board with rccb-min. 7 nos, feeler gauge-min. 3 sets, thread gauge-min. 3 sets, ss tube benders (6, 8, 10, 12 mm)-min. 4 sets each, circlip plier (inner/outer)-min. 3 nos each, air blower-min. 4 nos, anti-spark spanner set & slide wrench (6", 8", 12")-min. i sets, spray painting machine-min. 3 sets, magnetic spanner-min. 2 sets2x660 mw unit # 4.

CTN :45416078

13 Jul, 2026 NA

Cuttack - Odisha

Tender For corrigendum : supply installation and commissioning of mechanical equipment for different govt itis and polytechnics of odisha - lathe s.s &s.c. (all geared type) , solid works , universal milling machine , powersaw machine , pipe bending machine , tool and cutter grinder , pillar type drilling machine , double ended pedestal grinder , air compressor , surface plate - granite , battery operated pallet truck , cylindrical grinding machine , radial drilling machine , absorption and stripping , equipment , shearing machine , surface grinding machine , hyadraulic surface grinding , machine , hand drill machine , horizontal milling machine , demarcation equipment , universal cylindrical grinding , machine , gear pump test rig , battery operated order picker , sensitive bench drill machine , shaping machine , hydraulic pressure testing , machine , plotter , vertical milling machine , power hacksaw machine , co-ordinate measuring machine , screw pump , breaker machine , battery operated fork lift , band saw machine , hdpe butt fusion welding machine , portable drilling machine , horizontal milling machine , turret ram milling machine , silicon carbide grinder , profile projector , slip gauge as johnson metric , set , vertical milling machine , slotter machine , hydraulic pipe bending machine , electric pressure , test pump machine

CTN :45688593

06 Jul, 2026 NA

Bikaner - Rajasthan

Tender For supply of torch rechargeable torch , chisels , circlip plier internal , measuring tape , psd 8 , socket set of all size 8 mm to 24 mm , tool kit , dip tray , brushes surface cleaning , tool box , measuring can 2 ltr , soldering iron 65 w , philips screw driver , tool bag , sleeve remover cum striper , punch , filler gauge metric , tool sleeve remover , hammer ball pen 1 lb , hammer b p , side cutting plier , adjustable spanner , philips screw driver 6 inch , csd 4 , strip cutter , screw driver line tester , long nose plier 6 inch , easy full fit body safety harness , pad lock 3 inch , lead seal , eyelet copper , drilling machine , locking wire 0.8 mm , hose connection , barrel 200 ltr , hand rotary pump , hygrometer , box spanner 5.5 mm , csd 6 , steel box

State Government

CTN :45686885

03 Jul, 2026 NA

Gondia - Maharashtra

Tender For call for all types of building materials - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

CTN :45332795

26 Jun, 2026 NA

Meerut - Uttar Pradesh

Tender For bid to ras supply of armature for wood cutting machine , carbon brush for wooden cutting machine , armature with bearing for hand grinder machine , carbon brush for hand grinding machine , vice for drilling sensitive piller , copper condenser for window ac , blower for window ac , bobbin case for sewing machine , needle organ for sewing machine , belt for sewing machine , electric motor for outer unit for split ac hp one by eight rpm one hundred thirty , hydraulic seal for hydraulic jack trolley

corporations/Associations/Others

CTN :45468521

29 Jun, 2026 19.51 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of oil filled outdoor pt 132kv , safety shoes with following specification , electrical safety hand gloves 5k amp current , electrical hand gloves 33 kv , discharge earthing rod with clamp and earthing cable for 400 kv , transformer pt 415v , portable digital megger , mcb 440 vac 4pole 16a , high mast light mcb 10a 240 , tp power contactor coil , thermal o l relay mn2 , thermal o l relay , dc clamp meter , mcb 125a 4 p 415vac , power contactor 415v , 3te7496 2aro star delta starter 15kw motor 415v , grinder cutter portable 4 , precision instrument radial drilling machine with standard bit set , motor o l relay range , filter paper pack , gear pump with oil seal , gear pump with oil seal 1ix2 , coumpound gauge 63mm , gaue thermo statice 30 , 500 lph oil centrifuging machine portable type , petroleum jelly for battery , mccbn 16r 150a 3p , ns type hrc fuse3na 7803 orc 10 a , ns type fuse 16 amp , ns type fuse 25 amp , ns type fuse 32 amp , transformer 415 230v ac 50hz 3kv , rect doide stud type mdk 240v , shunt ext 75 mv 0 to 200 amp std size , shunt ext 75 mv 0 to75 amp std size , tong tester including , battery specification 12v 25 plates , neoprene rubber plug , hylomer blue , condenser rubber cord 20x10 , rtv 736 100gm tube , anna bond 100 gm tube , hand operated hydraulic crimping tool , aluminium lugs 95 mm als 228 , aluminium lugs 16 sq mm , aluminium ferrule 150 mm , ring type short barrel copper lugs 95 sq mm with , aluminium ferrule 16 sq mm , ht csk nut bolt washer, size 24x140 mm , ht csk nut bolt washe, size 30x130 mm , ht csk nut bolt washe 30x370 mm , ht csk nut bolt washe size 38x130 mm , four digit lcd display vibration meter , infrared thermometer tktl 20

CTN :45648058

07 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of pneumatic torque wrench spec as per annexure a in atc of bid document , reciprocating air compressor electric motor driven 10.0 to 10.9 kg per cm2 single phase spec as per annexure b in atc of bid document , reciprocating air compressor electric motor driven 10.0 to 10.9 kg per cm2 three phase spec as per annexure c in atc of bid document , bench manual feed 20 mm capacity drilling machine bench type or pillar type spec as per annexure d in atc of bid document , cutoff wheel dia 105mm , rust remover solution 300 ml , m12 plain washer , emery sheet grit size 120 , emery sheet grit size 180 , ms welding electrode 4mm , soldering iron , 4 digit backlit hand held true rms clamp meter , hand held 100 khz digital multimeter , half inch chrome plated ratchet , insulated pliers , alloy steel center punch , line tester , round m 8 medium grip screwdrivers , round m 3 electricians screwdrivers , miniature screwdriver set , iec 60900 insulated wire stripper , stainless steel chrome universal bevel protector , plain electrical glove 11 kv , welder gloves or gauntlets type 3 , mild steel split or cotter pin 2.5 mm , mild steel split or cotter pin 3.2 mm , adhesive super joiner tubes or synthetic glue , welding helmet , pointer stick extendable , mild steel welding electrode 1.6 mm , e 17 covered electrode , e 19.9 l covered electrode , tool saw blades or hacksaw blades , rubber ht tape , plain washer type b m16 , plain washer type a m8 , plain washer type a m 6 , plain washer type a m 10 , aluminium oxide arbor flap wheel , enamel paint remover spray , lcd display calipers , dark glass for welders screen arc current 220 , single beam or pole manual na for vernier height guage , chipping strong hammer , heavy duty high conductivity earth clamp , stainless steel soldering clamp holder , digital level , cable lugs size 90 mm , cable lugs size 4 mm

State Government

CTN :45663345

02 Jul, 2026 NA

Gondia - Maharashtra

Tender For call for purchasing of all kind of road and building material under various types schemes in year 2026-27 - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

State Government

CTN :45663351

02 Jul, 2026 NA

Gondia - Maharashtra

Tender For call for purchasing of all kind of road and building material under various types schemes in year 2026-27 - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

Liner Hanger Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others

State Government

State Government