Latest liner kit Tenders | Government liner kit Tenders

CTN :40962936

08 Jul, 2025 2.00 Lacs

West Kameng - Arunachal Pradesh

Tender For supply of stationery and vehicle accessories and parts : : - epson l6570 printer , epson l8180 printer , broter hlt4000dw printer , impact pen , pocker , calculator , hard disk 1tb , karbon , hood , battery , tyre

State Government

CTN :40938556

18 Jul, 2025 NA

Nagpur - Maharashtra

Tender For supply of providing of customised utility vehicle 1 at dcf office zero miles civil lines nagpur , providing of customised utility vehicle 2 at dcf office zero miles civil lines nagpur , providing and fixing protective accessories as per department requirement of customised utility vehicle 1 at dcf office zero miles civil lines nagpur , providing and fixing protective accessories as per department requirement of customised utility vehicle 2 at dcf office zero miles civil lines nagpur , providing and fixing decorative accessories as per department requirement of customised utility vehicle 1 at dcf office zero miles civil lines nagpur , providing and fixing decorative accessories as per department requirement of customised utility vehicle 2 at dcf office zero miles civil lines nagpur , proving licesing assistance from govt of maharashtra rto department of customised utility vehicle 1 at dcf office zero miles civil lines nagpur , proving licesing assistance from govt of maharashtra rto department of customised utility vehicle 2 at dcf office zero miles civil lines nagpur , providing and installation of sound system for utility vehicle 1 at dcf office zero miles civil lines nagpur , providing and installation of sound system for utility vehicle 2 at dcf office zero miles civil lines nagpur , cat 6 patch cord (q2) , cat 6 cable for indoor use (q2)

Central Government/Public Sector

CTN :40940027

23 Jul, 2025 9.00 Lacs

Purnea - Bihar

Tender For bazar supply rrs material in technical area at af stn purnea under age i af purnea - excavation over area not exceeding 1.5mtr deep and getting out in soft/loose soil complete all as specified and directed., removing excavated material exc 250 m but n.exc 500 m and depositing where directed complete all as specified and directed., supply only for broken stone boulders of granite /trap or basalt stone of size exc 100 mm but not exc 300 mm including surface dressing of stacking ground & stacked properly,complete all as specified and directed. note:-(i) stack measurement of broken stone/boulders shall be entered in mb before payment., hiring of vibromax power roller of capacity 8 to 12 toone capacity for rolling/compaction of stone boulder,gsb and wet mix macadam as directed by engr-in-charge. note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor., hiring of generator 5 kva (trailor mounted) with all electric connection accessories to electric output units installed to any location in technical area as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor., hiring of slush pump of capacity 1.5 hp with water discharge 20000 ltrs per hours for dewatering propose from trenches /well etc with provision of hose pipe of suitable bore beyond 100 mtr from exercise location as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor.(iv) necessary arrangement shall be made by the contractor within 24 hrs after intimation of engineer-in-charge for conduction of scheme., hiring of tipper 8.5 cum capacity delivered to any location in technical area for shifting of rrs material as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor.(iv) necessary arrangement shall be made by the contractor within 24 hrs after intimation of engineer-in-charge for conduction of scheme., hiring of jcb 4 cx deliverd to any location in technical area as directed by engr-in-charge. note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehicle/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor.(iv) necessary arrangement shall be made by the contractor within 24 hrs after intimation of engineer-in-charge for conduction of scheme., hiring of front end loader (hydraulic wheeled) delivered to any location in tech area for excavation in trenches/loading of rrs material as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor.(iv) necessary arrangement shall be made by the contractor within 24 hrs after intimation of engineer-in-charge for conduction of scheme., hiring of water bowzer of 10000 ltrs capacity with filled water in tech area in any locatio as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessar

CTN :40922182

07 Jul, 2025 NA

Banaskantha - Gujarat

Tender For supply of vehicle accessories -m and l for fitments of new footmat set in side the vehicle properly , m and l for fitments of tpv buket mat complete , m and l for door visior complete , m and l for fitments of plastic mud flap set of rear and front side , m and l for fitments of new seat cover of all set , material for fitments of garrison engineer box front and rear side with wiring for bulb by using 2mm thick gi sheet , material for fitments of garrison engineer plate with name of two nos front and rear side in the box by using acrylic sheet , material for making garrison engineer box cover including provn of fixing at front and rear side complete by using resine material , m and l for fitments for new steering raggine cover properly and checking complete , vehicle accessories , labour work for wiring of making connection into bulb of garrison box and testing complete , m and l for flag rod fitting to the vehicle complete

Central Government/Public Sector

CTN :40931588

09 Jul, 2025 NA

Kota - Rajasthan

Tender For hydraulic re- railing equipment (hre) with concomitant accessories for road mobile vehicle as per technical specification & conditions attached at annexure a,b &c. (1) bidder shall submit / attach th eir remarks against each of the specifications / parameters whether compiled or not .if not, mentioned the deviation clearly in annexure a,b &c.(2). firms other than oem should submit authorized dealer certificate from oem during submission of tender. non-compliance of following shall lead to summarily rejection of the offer and no correspondence in this regard will be entertained .make - bemco/mfd or similar. ( warranty p eriod : upto 30 months from the date of supply) [ warranty period: 30 months after the date of delivery ]

CTN :39038232

18 Jul, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

Central Government/Public Sector

CTN :40627366

07 Jul, 2025 NA

Delhi - Delhi

Tender For corrigendum : budgetary quote for supply of am 10w vhf transceivers for desktop and vehicle mountable and associated accessories

Central Government/Public Sector

CTN :40855765

18 Jul, 2025 NA

Gautam Budnagar - Uttar Pradesh

Tender For supply of fixed ip dome camera 8 mp or 02 mp with mounting accessories ip 66 , fixed ip bullet camera 8 mp with mounting accessories ip 66 , ptz dome camera 2mp ip 66 , ptz camera 2mp with ir ip 66 , workstation with 26 specification 17 32gb ram 1tb 2gb cpu , uhf rfid reader , rfid cards for person and vehicle , rfid card printer with laminator and printing consumables for 1000 , emergency alarm system

CTN :40858606

02 Jul, 2025 6.00 Lacs

Kanpur - Uttar Pradesh

Tender For m and r work under edd- rania -- loading 8.5 m long pcc pole from electricity storage centre jainpur on own vehicle and taking it to work site and unloading it safely through unpaved road. a loading 11 m stp pole from electricity storage centre jainpur on own vehicle and taking it to work site and unloading it safely through unpaved road. a transport of electric line material like conductor, clamp, nut-bolt wire, lt cable, stonepad, station set, xlpe, abc etc. to the specified place by own vehicle for an estimated distance of 75 km through unpaved road. a digging pit at the place of broken/damaged poles and installing pcc poles by tying all accessories like cross arm, disc, pin insulator etc. and fitting earthing rod. a tying all accessories as per requirement in the long span in the middle of the already constructed line. the work of re-energizing by installing additional pcc/stp poles as per the prescribed standard/specification of response link. a the work of re-energizing by installing additional pcc/stp poles as per the prescribed standard/specification of response link while tying all the accessories as per requirement in the middle long span of the already constructed line. a installation of new section double pole in place of broken/damaged double pole. a grouting work of pcc/stp poles as per respo standard. supplying cement, ballast, gravel in the ratio of 1:2:4. repairing section double pole. tightening damaged stays by renosing. tightening the white wires of 33 kv line, each wire and tightening the white wires of lt and 11 kv line, each wire. straightening the skewed poles of 33 kv line/11 kv line/lt line as per respo standard and tying all accessories and erecting them correctly. giving clearance by trimming the trees of 33/11 kv and lt line. spreading the acsr vessel conductor in 33/11 kv line and tying stringing and sagging insulators in all the three phases and jumpering and earthing each wire. replacing damaged cross arm.send feedbackside panelshistorysaved