Latest liner Tenders | Government liner Tenders

Central Government/Public Sector

CTN :40699652

18 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For fabric coated industrial tape with paper based release liner & fire retardant coating in sel f adhesive form with high tear strength & high tensile strength to the following technical requirements: 1.application : suitable for protection of cables from sharp edges inside stainless steel cable trays. 2.th ickness of tape with adhesive : 0.20 to 0.30 mm 3.adhesion to steel (n/cm) : minimum 7.5 n/cm* 4. te nsile strength (n/cm): minimum 150 n/cm* 5.elangation at break (%) : 30-40 %* 6.fire resistance : ul 9 4-v0 7.shelf life : 12 months from date of receipt of material 8.length (mts) : 20 +/-0.010 mts. 9.width (cm) : 7.5 +/- 0.5 cm. 10.water permeability : impermeable and no drops shall be observed after 24 hr s. * shall conform to is 7809. note: 1. test reports from any nabl approved labs is acceptable. 2. samp le shall be supplied before effecting bulk supply. 3.oems or their authorized dealers shall only be consi dered. 4. the tape shall be supplied in roll form with suitable packing arrangement. [ warranty perio d: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40698903

14 Jul, 2025 NA

Hubli - Karnataka

Tender For provision of four (04) numbers of (two (02) five liner and two (02) one liner (one double faced & one single faced)) train indication board (tib) at sss hubballi railway station.

Central Government/Public Sector

CTN :40701982

15 Jul, 2025 NA

Solapur - Maharashtra

Tender For supply of side frame friction liner to drg. no. rdso[w ]

Central Government/Public Sector

CTN :40461021

19 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : manufacture and supply of galvanized metal liner to rdso drg. no. rt- 8748 for 60 kg (uic)/ 60 e1 rails with latest alterations-7 for use with wider psc sleeper to rdso drg no. t-8746 confirming to ir s specification for metal liners for use with elastic rail clips sr. no. t-56- 2025 (the alt in drawing and speci fication issued by rdso up to one month prior to tender closing date shall be applicable in this tender). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40701858

11 Jul, 2025 NA

Itarsi - Madhya Pradesh

Tender For supply of loading pad shoe liner to clw drg.no. 01/2/31/4 alt.6 ref-5 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40700151

25 Jun, 2025 NA

Kota - Rajasthan

Tender For wear plate liner for yoke pin support plate as per drg. no. wa/bd-4462, item no. part-a, alt-8 or latest confirming specification- wd-70-bd2010, rev.-4 of nov-24 or latest. (stamp manufactur er%u2019s initial, month & year of manufacture on the hidden surface of item in 6 mm type). warrant y period: 30 months from the date of supply. [ warranty period: 30 months after the date of deliver y ]

Central Government/Public Sector

CTN :40699330

07 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For supply of horn face liner for conventional loco bogies as per rdso drg. no. skvl-058 with thickness 5 m m instead of 6 mm [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40070484

24 Jun, 2025 12.60 Lacs

Kutch - Gujarat

Tender For corrigendum : supply of web liner for beater wheel mill of boiler unit 3 at kltps. - store code: 1111020025 web liners for beater wheel of mill unit 3, material-a-217.93 cor wc.i. mateiral composition, c-0.25 max, si-0.60 max,p-0.04 max, mn-0.5 to 0.8, s-0.045 max, mo - 0.45 to 0.65

Central Government/Public Sector

CTN :40692767

27 Jun, 2025 NA

Mandal - Gujarat

Tender For supply of warman pump spares > - model: 1.5/1 bah, metal/ rubber /expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, gland ( 2 piece), lantern ring, volute frame seal, frame plate, volute liner, discharge joint ring, impeller o ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), frame plate liner insert, impeller, cover plate bolt& nut (1 set consists of 4 nos), cover plate, intake joint ring, gland clamp bolt (1 set consists of 2nos), gland bolt, nut & washer (1 set consists of 2nos), gland packing (1 set consists of 2 nos), neck ring, expeller, expeller ring, seal ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), end cover set screw (1 set consists of 8 nos), shim set, piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner, frame plate stud & nut, frame plate liner, cover plate bolt& nut, model: 3/2 cah, metal/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve, frame plate liner insert stud (1 set consists of 4 nos), seal ring, volute frame seal, impeller, discharge joint ring, volute liner, cover plate, intake joint ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), frame plate liner insert, frame plate, impeller o ring, grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, expeller, expeller ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner stud (1 set consists of 4 nos), cover plate liner (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), frame plate liner, model: 4/3 dah, rubber/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, frame plate liner stud (1 set consists of 4 nos), frame plate liner, frame plate, impeller (normal), cover plate liner, cover plate, cover plate liner stud (1 set consists of 4 nos), adjusting screw, nut & washer (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), impeller o ring, cover plate bolt& nut (1 set consists of 4 nos), shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, gland clamp bolt (1 set consists of 2 nos), frame plate liner insert, seal ring, impeller (trimmed), volute liner, volute frame seal, frame plate liner insert stud (1 set consists of 4 nos), discharge joint ring, keeper plate, intake joint ring, expeller, expeller ring, model: 6/4 eah, metal/ gland seal, bearing assembly, clamp washer, clamp bolt-1 nut, shaft sleeve o ring, shaft sleeve, frame plate liner insert stud -1 thin self lock nut, seal ring, volute liner seal, impeller, frame plate, discharge joint ring, volute liner, throat bush, cover plate, cotter, intake joint ring, adjusting screw -3 thin nuts -2 washers, base, frame plate liner insert, impeller o ring, cover plate bolt -2 nuts, packing, gland ( 2 piece), gland bolt -1 nut -1 wa

State Government

CTN :40698938

03 Jul, 2025 4.53 Lacs

Korba - Chhattisgarh

Tender For work contract for anticorrosive glass flake epoxy coating on circulating water pump (cw pump) & raw water pump spares i.e suction casing, discharge casing, impeller liner casing, column pipe elements etc. of 2x250 mw, dspm, tps korba (east)

Liner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors