Get complete information related to latest Linoleum Sheet Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Linoleum Sheet Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Linoleum Sheet Tenders.
Tender For fire prevention and life safety equipment and auxiliary work for mamlatdar office at detroj, dist.: ahmedabad.- supplying, installing, testing and commissioning main electric motor driven 20 hp horizontal centrifugal end suction mono block type pump, 900 lpm @ 56 mtr. head , supplying, installing, testing and commissioning of control panel suitable for start and stop of main electrical pump (20 hp) , supplying, installing, testing and commissioning of copper flexible cable frls for 20 hp pump, 3 c x 6 sqmm , supplying, installing, testing and commissioning of dial type pressure guage having 100 mm dial & range of 0-14 kg/cm2 with isolation valve , supplying, installing, testing and commissioning of cast iron butterfly valve conforming to bs 5155 class pn 1.6 rating of size 100 mm , supplying, installing, testing and commissioning of cast iron non-return valve class pn 1.6 rating of sizes , supplying, installing, testing and commissioning of 25 mm dia brass single acting air release valve , supplying, installing, testing and commissioning of forged brass ball valve, screw end type, pn 1.6 rating of sizes 25 mm , supplying, installing, testing and commissioning of ms erw class 'heavy' pipes confirming to is 1239 pt -i heavy grade upto 150 nb & above is: 3589 with painting, with anchor fasteners, bolts nuts, clamps, "u" bolts, ms fittings such as reducers, tees, elbows etc. as per drawings. incl painting the pipe line with coat of synthetic enamel over base coat of red oxide paint , supplying, installing, testing and commissioning of stainless steel single headed oblique pattern hydrant landing valves with 80 mm dia flanged inlet & 63 mm dia female outlet complete with pvc cap , supplying, installing, testing and commissioning of stainless steel single headed oblique pattern hydrant landing valves with 80 mm dia flanged inlet & 63 mm dia female outlet complete with pvc cap , supplying, installing, testing and commissioning of 63 mm dia 15m long non percolating flexible hose (rrl type a) with stainless steel male & female instanteneous type coupling , supplying, installing, testing and commissioning of standard stainless steel branch pipe with nozzle of 20 mm nominal bore outlet suitable to fit with standard instanteneous type 63 mm dia coupling , supplying, installing, testing and commissioning of standard fire hose cabinet wall mounting type having single door opening with necessary locking arrangement by allan key suitable for housing of 1 nos. 15 mtrs. hose pipe & 1 no. branch pipe, ms 18 gauge , supplying, installing, testing and commissioning of wall mounting type first aid fire hose reel with drum, hanging bracket, 30 m x 25 mm dia high pressure hose pipe with 8 mm ss shut off nozzle and all required accessories , supplying, installing, testing and commissioning of fire brigade inlet connection of 2 way with 2 nos. 63 mm dia built in non return valves instantaneous coupling type arranged on 100 mm dia. pipe , supplying, installing, testing and commissioning of fire alarm and pump trigger system as per requirement and specification consisting of following items , pump on/off switch , cable for pump on-off switch, 3 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , manual call point (mcp) , hooter , fire alarm panel, conventional type, 2 zone panel with battery backup , cable for mcp, hooter, 2 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , supplying, installing, testing and commissioning of fire extinguishers of following types co2 type fire extinguisher of capacity 4.5 kg with hanging bracket & accessories , stored pressure type dry chemical powder extinguisher of capacity 6.0 kgs. as per is , 15683 with hanging bracket & accessories , providing and fixing, testing and commissioning of ci y-type strainer with ss mesh conforming to pn 1.6 rating of size 100 mm , design & engineering, survey charges
Tender For fire prevention and life safety equipment and auxiliary work for mamlatdar office at mandal, dist.: ahmedabad.-- supplying, installing, testing and commissioning main electric motor driven 20 hp horizontal centrifugal end suction mono block type pump, 900 lpm @ 56 mtr. head , supplying, installing, testing and commissioning of control panel suitable for start and stop of main electrical pump (20 hp) , supplying, installing, testing and commissioning of copper flexible cable frls for 20 hp pump, 3 c x 6 sqmm , supplying, installing, testing and commissioning of dial type pressure guage having 100 mm dial & range of 0-14 kg/cm2 with isolation valve , supplying, installing, testing and commissioning of cast iron butterfly valve conforming to bs 5155 class pn 1.6 rating of size 100 mm , supplying, installing, testing and commissioning of cast iron non-return valve class pn 1.6 rating of sizes , supplying, installing, testing and commissioning of 25 mm dia brass single acting air release valve , supplying, installing, testing and commissioning of forged brass ball valve, screw end type, pn 1.6 rating of sizes 25 mm , supplying, installing, testing and commissioning of ms erw class 'heavy' pipes confirming to is 1239 pt -i heavy grade upto 150 nb & above is: 3589 with painting, with anchor fasteners, bolts nuts, clamps, "u" bolts, ms fittings such as reducers, tees, elbows etc. as per drawings. incl painting the pipe line with coat of synthetic enamel over base coat of red oxide paint , supplying, installing, testing and commissioning of stainless steel single headed oblique pattern hydrant landing valves with 80 mm dia flanged inlet & 63 mm dia female outlet complete with pvc cap , supplying, installing, testing and commissioning of 63 mm dia 15m long non percolating flexible hose (rrl type a) with stainless steel male & female instanteneous type coupling , supplying, installing, testing and commissioning of standard stainless steel branch pipe with nozzle of 20 mm nominal bore outlet suitable to fit with standard instanteneous type 63 mm dia coupling , supplying, installing, testing and commissioning of standard fire hose cabinet wall mounting type having single door opening with necessary locking arrangement by allan key suitable for housing of 1 nos. 15 mtrs. hose pipe & 1 no. branch pipe, ms 18 gauge , supplying, installing, testing and commissioning of wall mounting type first aid fire hose reel with drum, hanging bracket, 30 m x 25 mm dia high pressure hose pipe with 8 mm ss shut off nozzle and all required accessories , supplying, installing, testing and commissioning of fire brigade inlet connection of 2 way with 2 nos. 63 mm dia built in non return valves instantaneous coupling type arranged on 100 mm dia. pipe , supplying, installing, testing and commissioning of fire alarm and pump trigger system as per requirement and specification consisting of following items pump on/off switch , cable for pump on-off switch, 3 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , manual call point (mcp) , hooter , fire alarm panel, conventional type, 2 zone panel with battery backup , cable for mcp, hooter, 2 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , supplying, installing, testing and commissioning of fire extinguishers of following types co2 type fire extinguisher of capacity 4.5 kg with hanging bracket & accessories , stored pressure type dry chemical powder extinguisher of capacity 6.0 kgs. as per is , 15683 with hanging bracket & accessories , providing and fixing, testing and commissioning of ci y-type strainer with ss mesh conforming to pn 1.6 rating of size , design & engineering, survey charges
Tender For bid to ras supply of 5 hp borewell submersible motor pump set , 50 mm dia lead free upvc column pipe , 12 mm dia double twisted nylon rope , 3 core 2.5 sq. mm flexible flat submersible cooper conductor cable , 50 mm dia gate valve of class 1 non rising stem type , 50 mm dia b class gi pipe , providing fixing suitable m.s. sheet bore well cover with nut bolt etc as reqd. , ms clamps for holding submersible pump and delivery pipe line , 3 hp mono block pump set , 50 mm dia foot valve , 40 mm dia gate valve of class 1 non rising stem type , 40 mm dia vertical lift check valve of class 1 , 40 mm dia upvc pipe , 50 mm dia upvc pipe , 63 a tpn disconnector fuse switch unit , 63 a 415 volt 4 strip copper bus bar chamber , pump controller , 4 x10 sqmm alu cable , 4 x10 sqmm brass compression gland , 6 swg dia g.i. wire on surface or in recess
Tender For rate contract for medicine - stainless steel abdominal hysterectomy set, n.s.v set (s.s), g.v set, self abdominal detractor, m.t.p set., vaccine carrier (small size), x-ray digitalisation with high-end cr system (with installation & 1 yers. warrenty) console software with mulitmodality work station the cr system should have advances workstation provided with 17" high resolution monitor, keyboard & ouse, with the fol., digital ultrasound machine colour dopler (high resolution ) with 4 probe, semi auto analyzer, fully automated bio-chemistry analyzertechnical specificationsthroughput-150t/hr (constant with both mono and double reagent)system function-random access/stat/batchtest method-end point, fix time, kinetic, (single/double reagents chemistry, mono/ bio-chromatic measurements)calculation methods-1 point linear, 2 point linear, exponential, logit log3p, logit log 4 p, logit log 5p, spline, line graph, k factorblank-reagent blank, sample blank, pre sample blank, pre reagent blanksample tray-40 position, sample volume :2-30 ui, 0.1 ul increment, micro cup, & test tube can be used for samplereagent tray-80 position, reagent volume: 20-300 ul, 1 ul incrementmixing system-teflon coated mixersample probe-1 needle with liquid detector, shock sensoroptics-halogen-tungsten lamp, absorbance range: 0-4.0 abs resolution: 0.0001 abs.diffraction photometry with wave length: 340, 405, 450, 505, 546, 578, 630, 700nm & 4 more optionswash station-12 step washing, 4 needle wash station, 1 dry pad, external needle cleaningcalibration-linear and non-linearqc-multi-level qc setup with levy-jennings graph and westgrads multi rules with mean sd, and cvwater consumption-not more than 6l/hrtemperature-reagent: 2-14 c (24 hr refrigeration), reaction cuvette: 37c 0.1 humidity- 80%system interface-usbpower requirement-ac 220v 10%, 50/60 hzdimensions-750 mm*560mm*530mm, hotair oven, binocular microscope (olampus), centri fuge machin (good quality), micropipette (0-50 microliter), micropipette (0-500 microliter), micropipette (0-1000 microliter), microtips (0-50 microliter), microtips (0-1000 microliter), bed side screen with cloth 1"round pipe with wheel, sponge holding (all size), artery forceps 6" curved, artery forceps 6" straight., artery forceps 8" curved, artery forceps 8" straight., artery forceps 4" straight., alliys tissue forcep (all size curved straight), mosquito forcep (all size curved straight), scissor 6 " curved (all size), scissor 6 " straight (all size), scissor mosquito straight. (all size curved, straight), diatheromy (machine), laparoscopic instrument full set (best quality), needle holder 8 "curved, needle holder 8 " straight, needle holder 6 "curved, needle holder 6 " straight, needle holder 4 "curved, needle holder 4 " straight, doner couch (3 motor), blood weighting mechine, blood band refrigerator (300 bag) temp.display outside, elisa reader with washer mechine with printer & ups., doner couch (3 motor), blood weighting mechine, blood band refrigerator (300 bag) temp.display outside ( best quality), fully automated chemiluminescence analyzer(clia) 1. system should be fully automated walk -away with continuous loading facility.2. analyzer should have able to perform thyroid, bone, cardiac, fertility, diabetes and anemia profile test.3. working principle of system should be micron super paramagnetic particles platform with alp labeled reagents and amppd substrate.4. must have 3 phase magnetic separation with precisely controlled temperature.5. analyzer should have photon counting detection mode with photomultiplier photo counter with led reference module.6. the analyzer must have vortex non-touch mixing which can reduce carryover., 7. throughput of the system should be more than 180 tests in a hour.8. system should have 15 reagents onboard with onboard 2 -8 nonstop refrigeration facility 9. system should have at least 50 sample positions and continuous loading facility.10. system should have continuous reagent
Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi