Tender For purchase of fire safety and fighting laboratory equipment for fts department - purchase of fire safety and fighting laboratory equipment for fts department, cleveland open cup (coc) apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hzsafety: overheat protection heat insulation, pensky-martens closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustableignition:pilot flame with automatic shutter mechanismtemperature measurement:thermometer or digital sensor (ip-28c or astm)digital temperature displaypower supply:230v ac, 50 hzsafety: over-temperature cut-off flame safety control
Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosive coating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r
Tender For supply of liquefiedpetroleumgas for industrial use in 19 kgs. capacity firms own cylinders and empty cylinders on returnable basis confirming to is: 4576-2021 with latest revision / amendments, if any. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : supply of liquefiedpetroleumgas, type : commercial butane- propane mixture,confirming to is:4576-1999 (second revision) with amendment no 1 of may 2003 (reaffirmed 2009) edition 3.1 (2003-05) in 19 kgs cylinders. specn: cylinders. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of liquefiedpetroleumgas for industrial application ( automotive use), type 4.1(c)commercial propane based to is: 4576-2021, suitable for metal cutting purpose in railway workshop,net capacity of gas per cylinder will be 19 kgs. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For corrigendum : tender for supply and installation of laboratory equipment for integrated public health laboratory under pm abhim programme - deep freezer (-80), hotair oven, vertical- autoclave, automated- esr analyser, incubator, centrifuge tabletop-swing out- 16 tubes, up to 6000rpm, centrifuge tabletop -swing out- 8 tubes, up to 6000rpm, blood gas analyzer, microlite centrifuge, fluorescent microscope, bar code reader with printer, automated system for bacterial identification & ast, urine fluid analyser, histopathology equipments, automated hormone analyser, automated coagulation analyser, autoclave horizontal, micro incinerator for inoculating loops and needles, tissue homogeniser, turbidometer, vortex mixer, deep freezer (-20c), water bath, biosafety cabinet class ii a2 (model conforming to nsf standards), automated system of culture, deep freezer (-80), hotair oven, vertical- autoclave, automated- esr analyser, incubator, centrifuge tabletop-swing out- 16 tubes, up to 6000rpm, centrifuge tabletop -swing out- 8 tubes, up to 6000rpm, blood gas analyzer, microlite centrifuge, fluorescent microscope, bar code reader with printer, automated system for bacterial identification & ast, urine fluid analyser, histopathology equipments, automated hormone analyser, automated coagulation analyser, autoclave horizontal, micro incinerator for inoculating loops and needles, tissue homogeniser, turbidometer, vortex mixer, deep freezer (-20c), water bath, biosafety cabinet class ii a2 (model conforming to nsf standards), automated system of culture, deep freezer (-80), hotair oven, vertical- autoclave, automated- esr analyser, incubator, centrifuge tabletop-swing out- 16 tubes, up to 6000rpm, centrifuge tabletop -swing out- 8 tubes, up to 6000rpm, blood gas analyzer, microlite centrifuge, fluorescent microscope, bar code reader with printer, automated system for bacterial identification & ast, urine fluid analyser, histopathology equipments, automated hormone analyser, automated coagulation analyser, autoclave horizontal, micro incinerator for inoculating loops and needles, tissue homogeniser, turbidometer, vortex mixer, deep freezer (-20c), water bath, biosafety cabinet class ii a2 (model conforming to nsf standards), automated system of culture, deep freezer (-80), hotair oven, vertical- autoclave, automated- esr analyser, incubator, centrifuge tabletop-swing out- 16 tubes, up to 6000rpm, centrifuge tabletop -swing out- 8 tubes, up to 6000rpm, blood gas analyzer, microlite centrifuge, fluorescent microscope, bar code reader with printer, automated system for bacterial identification & ast, urine fluid analyser, histopathology equipments, automated hormone analyser, automated coagulation analyser, autoclave horizontal, micro incinerator for inoculating loops and needles, tissue homogeniser, turbidometer, vortex mixer, deep freezer (-20c), water bath, biosafety cabinet class ii a2 (model conforming to nsf standards), automated system of culture, deep freezer (-80), hotair oven, vertical- autoclave, automated- esr analyser, incubator, centrifuge tabletop-swing out- 16 tubes, up to 6000rpm, centrifuge tabletop -swing out- 8 tubes, up to 6000rpm, blood gas analyzer, microlite centrifuge, fluorescent microscope, bar code reader with printer, automated system for bacterial identification & ast, urine fluid analyser, histopathology equipments, automated hormone analyser, automated coagulation analyser, autoclave horizontal, micro incinerator for inoculating loops and needles, tissue homogeniser, turbidometer, vortex mixer, deep freezer (-20c), water bath, biosafety cabinet class ii a2 (model conforming to nsf standards), automated system of culture, deep freezer (-80), hotair oven, vertical- autoclave, automated- esr analyser, incubator, centrifuge tabletop-swing out- 16 tubes, up to 6000rpm, centrifuge tabletop -swing out- 8 tubes, up to 6000rpm, blood gas analyzer, microlite centrifuge, fluorescent microscope, bar code rea
Tender For supply of liquefiedpetroleumgas for industrial application propane based (excluding automobile use )type 4.1(c) to is 4576-1999 suitable for metal cutting purpose in railway. net gas capacity per cylinder 19 kgs. ]