Latest liquid deflector Tenders | Government liquid deflector Tenders

Central Government/Public Sector

CTN :45438027

06 Jul, 2026 NA

Karur - Tamil Nadu

Tender For supply of mini hinge with nut plate suitable for installation in switch board cabinet of lhb eog ac coaches to dirak part no:218-9501.00-00000+ 218-0907.15-00000 & arihant part no: ahg 361. as per rdso specification no: rdso/pe/spec/0192-2018 (rev-1) bill of material (bom) accepted make- diral/ arihant only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45453730

01 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For supply of hinge lift off 95 mm made of stainless steel 304 equivalent to dirak part no. 379 - 0568.04 - 09103 suitable for switchboard cabinet of lhb ac coaches make acceptable : dirak , south co., arihant, darshana oem or authorized dealer only to quote with documentary evidence [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45373430

10 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of pump body assly for tsh 10 pump part no 102p82024 , stuffing box ci tsh part no 203p82029 , main shaft en8 part no 201p382027 , impeller enclosed for tsh10 pump part no 101p82023a , part no 101p82023a impeller enclosed for tsh10 pump , werr rmgs tsh 10 part no 104p82026 , shaft sleeve bush aisi 410 part no 210p82036 , stuffing box bush tsh 10 part no 211p82037 , ci bearing housing part no 202p82028 , breg cover imp side ci tsh 10 part no 204p82030 , breg cover moy side 205p82031techno part no 205p82031 , inspection cover with funnel cock for tsh part no 103p82025 , lanternal ring gm part no 209p82035 , split gland gm for tsh 10 pump part no 207p2033 , motor side liquid deflector part no 206p82032a , gland plate ms part no 208p82034 , stud main casing en8 part no 301p82041 , stud for breg house part no 304p82041 , stud inspection cover en8 part no 311p82041 , stud gland en8 part no 307p82041 , sleeve nut impeller bolt impeller lock part no 212p82038 , set of domed nut part no 339p82041 , nut for main casing tsh 10 pump part no 302p82041 , nut for bearing housing for tsh 10 pump part no 305p82041 , nut for gland for tsh 10 pump part no 413p82041 , set of gasket for tsh 10 pump part no 405p82045 , suppt leg part no 213p82039 , oil seal for bearing nde tsh 10 pump big part no 403p82044 , rotating assy back pull out assy part no 407p82041c , pump body assy wearing ring insp cover part no 406p82041 , oil seal small tsh part no 404p82040 * /bid number : gem/2026/b/7599838 + /dated: 30-05-2026 ' ' / bid document 1 / 26

Central Government And Public Sector

CTN :45163049

09 Jun, 2026 NA

Narora - Uttar Pradesh

Tender For corrigendum : supply of distance ring , lock washer for impeller nut , bearing holder , lock washer for bearing nut , rubber bearing for impeller shaft one , rubber bearing for intermediate shaft , rubber bearing for impeller shaft two , rubber bearing for impeller shaftthree , sealing ring , shaft sleeve drive side , shaft sleeve for bearing spider , impeller shaft sleeve , thrust bearing carrier , washer for coupling pin , nut for coupling pin , lock nut , bearing nut , key for thrust collar , liquid deflector , o ring for head unit one , o ring for column unit , o ring for pump unit one , o ring for head unit two , o ring for pump unit two , o ring for pump unit three , o ring for pump unit four , o ring for head unit three , coupling pin , coupling bush , split ring for muff coupling , key for pump coupling , ratchet pin , thrust bearing lid , thrust bearing segment , journal bearing , stuffing box housing , compression spring , gripping washer , key for impeller shaft sleeve , bearing spider , impeller nut , shaft sleeve nut , pump casing hde , impeller , shaft , impeller nut , inspection hole cover , key for impeller , casing wear ring , brg. nut , round lock nut , bearing pedestal , bearing cover de , bearing cover nde , coupling key , grease nipple , cyl roller brg skf nu2319o r eq , spe roller brg skf 22319 e or eq , casing cover , split gland , shaft sleeve

CTN :45330069

09 Jun, 2026 11.79 Lacs

Multi City - Goa

Tender For corrigendum : maintenance of water supply system supply of spares for the 600 hp kirloskar make sct 300 59 pumps at gogol pumping station - "supply of pump shaft for the 600 hp kirloskar make( sct-300/59) pump.", "supply of gland for the 600 hp kirloskar make( sct-300/59) pump.", "supply of lantern ring (split ring) for the 600 hp kirloskar make( sct-300/59) pump.", "supply of liquid deflector for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing housing de for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing housing nde for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing cover de for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing cover nde for the 600 hp kirloskar make( sct-300/59) pump.", "supply of adjusting sleeve for the 600 hp kirloskar make( sct-300/59) pump.", "supply of locking sleeve for the 600 hp kirloskar make( sct-300/59) pump.", "supply of impeller key for the 600 hp kirloskar make( sct-300/59) pump.", "supply of coupling key for the 600 hp kirloskar make( sct-300/59) pump.", "supply of lock nut bearing for the 600 hp kirloskar make( sct-300/59) pump.", supply of o ring for sleeve of 600 hp kirloskar make( sct-300/59) pump., "supply of o ring for insert of 600 hp kirloskar make( sct-300/59) pump.", "supply of v ring 90d x 15.5t for the 600 hp kirloskar make( sct-300/59) pump.", "supply of v ring 82d x 18t for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing spacer for the 600 hp kirloskar make( sct-300/59) pump.", supply of wear ring for the 600 hp kirloskar make ( sct-300/59) pump., supply of collar for the gland packing of 600 hp kirloskar make( sct-300/59) pump.

State Government

CTN :45361239

31 May, 2026 NA

Jaipur - Rajasthan

Tender For supply of furniture work- wooden racks for storing components and equipment s in mechatronics lab-providing & fixing 19 mm block board with teak wood linings lam. and moldings (desgin, colour as per user/lnmiit norms), similar to other computer tables, almirahs, or other existing wooden items such as cabinet, shelves etc. including cutting fitting all type of lnmiit approved fittings, heavy duty adhesive (fevicol hi-per: anti-bubble, waterproof marine, heatx) and accessories like lock, telescopic channel, hinge as per directed by user/senior engineer in-charge. make- century ply laminate over visible front & top areas, century ply sanik 710, and green ply ecotech mr. edges: all edges are covered with pvc edge bands (2 mm thick) or wooden moulded (painted asian paint). the inner partations must be painted too. as per is: 1659, type: com, termite resistant, fire resistant, moisture repulant and y.o.m.:2025 hardware (locks, keys, handles, channels, hinges, and other accessories. make -godrej/moda/haffle/ hetich/ ebco.

Central Government/Public Sector

CTN :45293007

12 Jun, 2026 5.00 Lacs

East Khasi Hills - Meghalaya

Tender For supply of mouth mirror with handle , eplorer , tweezer , suture cutting scissor , needle holder small , ellis tissue forceps , austin tissue retractor with handle set , austin tissue retractor without handle set , luator set of 8 , mta carrier , gingival cord plunger , minnesota retractor , colour code root canal plunger , formalin chamber , wall mounted uv light dental cabinet , endo bo stainless steel , micro needle holder straight , micro needle holder curved , towel forceps , micro tissue holding forceps , stainless steel punch biopsy , bone curette , cement carrier , chisel 6mm , glass bead sterilizer , ligature wire cutter , s s wire cutter , universal plier , adams plier , silver amalgam filling , rubber bowl , enamel bowl , cheek retractor , tissue retractor , dental syringe stainless steel aspirating type , instrument cassette for 20 instruments steel , instrument cassette for etraction instruments , wa knife , wa spatula , crown holding forceps , plaster cutter , edentulous impression tray , impression half tray stainless steel , trauma kit for dental oral , 1 modelling lever , 1 plier , 1 bone cutting forceps single action , 1 zygomatic bone awl , 1 ordinary screw driver , 1 self holding screw driver , 1 wire twister , 1 bone holding forcep pointed , 1 ss drill bite for micrsomotor dss , 1 ss drill bite for micromotor dss 2.0mm , 1 ss drill bite for micromotor dss 2.5mm , 3 mini plates 2 holes , 3 mini plates 4 holes , 3 screw , 2 mini plates obital 4 holes , 2 l shape mini plates left 4 holes , 2 l shape mini plates right 4 holes , 2 mini plates 16 holes , cotton roll dispenser , spirit lamp , mouth prop elevator , cement condenser , composite instrument titanium blue- 06 nos , articulator hinge tripod , blow troch , needle holder curved , chip blower , cement miing spatula fleible , glass slab , standing bp instrument , warwick james straight elevator , karmer periosteal elevator , prichard periosteal elevator , water distiller , wa carver , g p cutter , microneedle holder straight , microneedle holder curved , plastic instrument tray with cover , dental amalgam filling set , amalgam condenser , ball burnisher , diamond carver , hollen back carver , inte proimal carver //bid details 2 / 66

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

State Government

CTN :45122219

25 May, 2026 5.62 Lacs

Sarni - Madhya Pradesh

Tender For procurement of spares of domestic water pumps make kbl, model dsm 80/36, installed at dm plant, stps, sarni. - spares of domestic water pumps make kbl, model dsm 80/36., impeller 1st stage part no. 1570001, impeller 2nd stage part no. 1580001, pump shaft part no. 1800001, wear ring part no. 1900001, shoulder ring part no. 1990001, interstage ring part no. 2040001, lantern ring part no. 2270001, split gland part no. 2290001, liquid deflector part no. 2360001, bearing housing de part no. 2400101, bearing housing nde part no. 2400201, impeller nut part no. 3300001, round lock nut part no. 3360101, grease nipple part no. 4410001, interstage diaphragm part no. 4620001, o ring set part no. subsor, set top and bottom assy part no. staba01, set of keys part no. subsok, set of seals part no. subsoo, set of plugs part no. subsop

Central Government/Public Sector

CTN :45270771

01 Jun, 2026 NA

Gaya - Bihar

Tender For supply of profile hinge 95 mm for switch board cabinet (s1) of lhb ac coaches as per dirak part no: 242-9103.00-00000 or hafele make as per bill of material (bom) for switch board cabinet of rdso spec no:rdso/pe/spec/ac/0192-2018 (rev.1) make/brand:- dirak/arihant/southhco/hafale or similar [ warranty period: 30 months after the date of delivery ] ]

Liquid Deflector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors