Latest liquid glass Tenders | Government liquid glass Tenders

CTN :40098786

14 May, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of fevicol , sr solution , nail 3 inch , varnish 5 ltr , red mitti , brown mitti , yellow mitti , stainer , wall putty , plain glass , plywood 8x4x18mm , silver paint , 18 gauge 8x4 sheet , clipper , washable distemper

Co-operative

CTN :40089707

29 Apr, 2025 2.00 Lacs

Kheri - Uttar Pradesh

Tender For job work and supply of air compressor spares and services for season 2025-26 - air compressor servicing, repair & maintenance of i.r make compressor - model 7 x 5 (02 nos) , model 9.5 x 7 (03 nos) , model 11x7" (01 no) , model no. 235 (01 no) , type - ml 37 - 7.5 (02 nos) & kirlosker make (01 no), crank shaft oil seal for model no. 7 x 5 , i.r, channel & spring set suction for model no. 7 x 5 , i.r, channel and spring set discharge for model no. 7 x 5 , i.r, seat plate for model no. 7 x 5 , i.r, air filter for model no. 7 x 5 , i.r, oil filter for model no. 7 x 5 , i.r, lubricator oil pump for model no. 7 x 5 , i.r, rubber star coupling for oil pump for model no. 7 x 5 , i.r, piston ring u/l for model no. 7 x 5 , i.r, flat ring u/l for model no. 7 x 5 , i.r, flat head screw for model no. 7 x 5 , i.r, oil pump seat for model no. 7 x 5 , i.r, oil pump glass for model no. 7 x 5 , i.r, star washer for model no. 7 x 5 , i.r, gasket set for model no. 7 x 5 , i.r, piston ring set for model no. 7 x 5 , i.r, valve complete discharge for model no. 7 x 5 , i.r, plunger cover for model no. 7 x 5 , i.r, oil scrapper for model no. 7 x 5 , i.r, air scrapper ring for model no. 7 x 5 , i.r, plunger u/l for model no. 7 x 5 , i.r, lubricator complete for model no. 7 x 5 , i.r, suction valve complete for model no. 7 x 5 , i.r, piston ring 7 for model no. 7 x 5 , i.r, aux valve for model no. 7 x 5 , i.r, rubber o ring u/l for model no. 7 x 5 , i.r, ht bolt d-7, d-8, d-9 & d-16 for model no. 7 x 5 , i.r, stop plate discharge for model no. 7 x 5 , i.r, stop plate suction for model no. 7 x 5 , i.r, ring and spring set for model no. 7 x 5 , i.r, port plate o/i for model no. 7 x 5 , i.r, brass connector for model no. 7 x 5 , i.r, connector nut for model no. 7 x 5 , i.r, guide holder for model no. 7 x 5 , i.r, u/l spring for model no. 7 x 5 , i.r, valve plate screw for model no. 7 x 5 , i.r, lubricator alignment pump for model no. 7 x 5 , i.r, rubber o ring, for model no. 9.5 x 7 , i.r, chamber filter caplillary, for model no. 9.5 x 7 , i.r, spring washer 1/4",for model no. 9.5 x 7 , i.r, chamber cover plate rubber,for model no. 9.5 x 7 , i.r, chamber gauge glass ,for model no. 9.5 x 7 , i.r, u/l teflon o ring for model no. 9.5 x 7 , i.r, u/l plunger cap for model no. 9.5 x 7 , i.r, lubricator alignment pump for model no. 9.5 x 7 , i.r, vlave plate screw for model no. 9.5 x 7 , i.r, angle check valve for model no. 9.5 x 7 , i.r, channel & spring set discharge for model no. 9.5 x 7 , i.r, channel & spring set suction for model no. 9.5 x 7 , i.r, seat plate discharge for model no. 9.5 x 7 , i.r, seat plate suction for model no. 9.5 x 7 , i.r, gasket set for model no. 9.5 x 7 , i.r, piston ring for model no. 9.5 x 7 , i.r, piston rod for model no. 9.5 x 7 , i.r, air scrapper ring for model no. 9.5 x 7 , i.r, oil scrapper ring for model no. 9.5 x 7 , i.r, aux valve for model no. 9.5 x 7 , i.r, valve stop plate for model no. 9.5 x 7 , i.r, star lock washer for model no. 9.5 x 7 , i.r, lubricator pump for model no. 9.5 x 7 , i.r, oil pump seal for model no. 9.5 x 7 , i.r, rubber star coupling for oil pump for model no. 9.5 x 7 , i.r, air filter for model no. 9.5 x 7 , i.r, air filter (copper wire ) for model no. 9.5 x 7 , i.r, oil filter for model no. 9.5 x 7 , i.r, piston ring u/l for model no. 9.5 x 7 , i.r, o ring u/l for model no. 9.5 x 7 , i.r, flat head screw for model no. 9.5 x 7 , i.r, cap screw d-7, d-60 & d-63 for model no. 9.5 x 7 , i.r, guide holder discharge for model no. 9.5 x 7 , i.r, plunger u/l for model no. 9.5 x 7 , i.r, flat ring u/l for model no. 9.5 x 7 , i.r, oil pressure gauge for model no. 9.5 x 7 , i.r, oil scrapper for model no. 9.5 x 7 , i.r, main bearing for model no. 9.5 x 7 , i.r, c r bearing for model no. 9.5 x 7 , i.r, crank shaft oil seal for model no. 9.5 x 7 , i.r, plunger cover u/l for model no. 9.5 x 7 , i.r, plunger spring u/l for model no. 9.5 x 7 , i.r, dowel pin for model no. 9.5 x 7 , i.r,

CTN :40062013

03 May, 2025 2.53 Crore

Karanjia - Odisha

Tender For procurement and installation of different instruments for instrumentation of earth dam and spillway in deo irrigation project for the year 2025. - supply of fiberglass reinforced plastic (frp) make universal enterprises an improved venturi plate conformed to is: 9108 for accurate measurement of water flowing through channels comprising of masonry construction provided with pre-fabricated glass fiber lining on both sides, a side chamber provided in one side masonry wall of the said flume on the upstream side, a pipe provided at the bottom of the chamber connecting the said chamber with the water flowing through the notch, a float means provided in the said chamber, enabling recording the rising or falling level of water in the said chamber such as a scale provided in the said chamber, moulded engraved gauge marking in lit/sec and also in centimeter including moulded and engraved discharge table, capacity marking, flow direction, m.s pipe stiffeners, hold fasts, sand treatment on the backside of plate but excluding gst as per the instruction of engineer-in-charge etc. complete, inside spillway foundation gallery - 15 lit./sec. v-notch, seepage drain - 90 lit./sec. v-notch, calibration marks:- supply of polymers composites improved calibration marks make universal enterprises with contact molding process, both side finish, m.s. strip embedded inside, engraved and molded marking for bands and figures covered with radium and covered with two coats of polyurethane for surface protection with marking in reduced levels, sill, fsl, frl, mwl but excluding gst as per the instruction of engineer-in-charge etc. complete, supply vw up-lift pressure meter provision for connected to das make : aimil ltd. uplift pressure meters are used for measuring and recording of uplift pressures acting in foundations of concrete/masonry dams. vibrating wire type uplift pressure meter : range: 0.2 mpa to 5.0 mpa./7ksc accuracy: 0.5 -1 % fs. temp limit: - 10 to 70 deg c. coil resistance: 140 - 160 ohm thermistor: ysi-44005 or equivalent. material: stainless steel cable: 1m, 4-core borehole for uplift pressure meter at foundation gallery (inside spillway) should be straight from foundation level and clear. proposed location : inside spillway foundation gallery in overflow section: 7 no. non overflow section: 2 no. purpose: uplift water pressure measurement. (but excluding gst), supply automatic seepage measuring system make : aimil ltd / sysgeo italy or equivalent vibrating wire water leakage measuring systems are used for measuring water leakage and flow in dam galleries by installing v notch weir coupled with vibrating wire sensor for remote monitoring of water leakage. sensor type: sensor : vibrating wire precision water level sensor range: 300mm resolution: 0.025%fs material : stainless steel excitation : sweep or pluck assembly: v.w. type sensors enclosed in an environmental proof fibre glass box. splicing kit & adhesive required accessories. proposed location : inside spillway foundation gallery: 1 no. toe drain: 1 no. (drainage outlet) purpose: seepage water measurement in liter per second (but excluding gst), supply data logger or data acquisition system aimil make dt85g with cem20 or ace s korea analog channels 16 analog input channels each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. expansion requires optional cem20 sampling integrates over 50/60hz line period for accuracy and noise rejection maximum sample speed: 40hz effective resolution: 18 bits linearity: 0.01% common mode rejection: >90db line series mode rejection: >35db vibrating wire frequency range: 500 to 5khz coil resistance: 50 to 200 stimulation method: single pulse pluc digital channels 8 bi-directional channels input type: 8 logic level (max 20/30v) output type: 4 with open drain fet(max: 30v, 100ma) 4 with logic output alarms power supply , sim card will be in your scope. propo

CTN :39038241

01 May, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20nos), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, batterycharger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injectormulti hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineers square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, angle

CTN :40056035

28 Apr, 2025 50.00 Lacs

Sujangarh - Rajasthan

Tender For supply of materials for construction in gram panchayat bagsara athuna (for mgnrega verius ,plans on bsr 2025-26. f.y. 2025-26-, diesel road roar 8 to 10 tonne, , sheep foot roller, , truck 9 tonne, , tractor (25.40 hp), , tractor trolley, , tractor water tanker capacity 4000 litres water, , cement concrete mixer 57 pan foot, , pumping set 15 h.p., , niddle/plate vibrator with operator, , camel cart/bullock cart with driver, , grinding machine with operator (large motor driven), , compressor, , hydraulic excavater/jcb (bucket capacity 0.4cum), , dumper, , scraper, , shuttering of wooden planks with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of ply with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of iron plate with poles and other materials installed on tps site and removed after a specified period, , water and pumping material (filling), , grinding machine (small operator, hand operated), , padla/kankar/jhajra, , mortar-soil/mud-masala, , lime from brick kiln for roasted masonry work, cement, ppc, white cement, fine aggregate, sand/bajri, gravel local, fly ash, surkhi, stone dust in masonry work, gitti of stone/brick (for other than road work), 40mm measured stone (hand broken grit) (boids cut 1/11), 40mm grit of stone (broken by crusher) (boids cut 1/11), 20mm chit of stone (broken by crusher), 12/10/6mm chit of stone (broken by crusher), brick clay, material for machining work (5 km, including lead), 6340mm stone crushed stone (boids cut 1/11), 63.40mm stone crushed stone (boids cut 1/11) cut 1/11), 9045 mm, hand broken stone aggregate (boids cut 1/11), quarry ravinsh. boids cut 1/6), graven (voids cut 1/6), puncture (boids cut 1/6), (22.5 x 11 x 7.50 cm), pacham peni (1st class), dinesh cheni (ii class), bhonima masonry stone, vinai nerada (rr), nimai gada (cr), baja gaalim upto 15cm height for purge work), paraja monim (23cm height for gadak/gharanja work), jodhpuri rai stone strip dhap shovel pieces (mumbai 2-3. thickness 10-12", thickness 2.5-3.5"), flaky material (3-4" thick & length and width 1-, 2), minister (dpc, sill, coping, lintel, tand, almirha etc), upto 25mm thickness, upto 21-40mm thickness, upto 40-50mm thickness, upto 50-75mm thickness, upto 75-100mm thickness, upto 100-150mm thickness, parn / patti patan katja stone, ? , 001 to 2300 cm, , more than 200 sq. cm, marble powder, marble stone (gajnagar ii quality/local 20mm thick., 000 sq. cm, 901 to 2300 burn cm and, more than 2300 perm, stone frame, single patam size 100 x 75 mm,, either patam size 125 x 75 mm., stone strips, up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles/blocks, glazed size-30x45 cm, mosaic size 40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, fr pvg insulated copper conductor single core cable 151 marked, 1.50 sq.mm, -, , 4.00 sq.mm, 6.00 sq.mm, 0.50 sq.mm, 1.00 sq.mm, local wood with fittings (for doors, doors and fences.) fire, acacia, others, factory made doors (30mm thick solid core single pane., structural steel, +, iron (door steel fe 415/500 for reinforcement), winding wire 18 gauge, iron girders, conia iron pokor bar/patti/angle iron, barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, mesh, iron mesh (24 gauge, mesh), cement concrete mesh akash patal 40mm thick, 3mm thick glass, paint, enamel paint, distorter (water bound), lime for painting (aras/kali), primer (for iron/wood), petroleum products, diesel hsd, mobil oil, , hand wash-basin 450*300mm with cupintv p.v. m. vent pipe, stone bar (5.w.) pipe 100 m.m. diameter, 0.6 m. long, m. p. pillar cock (dia

State Government

CTN :40044754

23 Apr, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

State Government

CTN :40052796

26 Apr, 2025 80.00 Lacs

Rajsamand - Rajasthan

Tender For 01rate for supply of construction material under village panchayat kunwaria-, , ghadla/kankar/jhajhra , , mortar and mud , , lime from kali bhatta for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand/gravel , , gravel local , , rakhi (fly ash) , , surkhi , , stone dust (in masonry work) , , ballast stone/brick (for other than road work) , , 40mm measuring stone (hand broken grit) (cut voids 1/11) , , 40mm grit stone (broken by crusher) (cut voids 1/11) , , 20mm grit stone (broken by crusher) , , 12/10/6mm grit stone (broken by crusher) , , brick mortar , , material for road work (including 5 km lead) , 63-40 mm crushed stone aggregate (voids carte 1/11) , , 63-40mm hand broken stone aggregate (voids cart 1/11 , , 90-45 mm. hand broken stone aggregate (voids cart 1/11 , , quarry rubbish (cut voids 1/6) , , gravel (cut voids 1/6) , , conker (cut voids 1/6) , , binding material (pi4-6) (cut voids 1/6) , , brick (22.5 x 11 x 7.50 cm) , , first class , , ?second class (ii class) , , soling / kharanja / masonry stone , , chinrai beradda (rr) , , masonry course (cr) , , kharanja soling (for flooring work upto 15cm height) , , kharanja soling (23cm height for road/kharanja work) , , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5") , , flaky material (3-4" thick & length and width 1-2") , , sandstone (dpc, sill, coping, lintel, tand, almirha etc) , , up to 25mm thickness , , up to 25-40mm thickness , , upto 40-50mm thickness , , up to 50-75mm thickness , , upto 75-100mm thickness , , upto 100-150mm thickness , , floor / strip paving stone , , floor planks upto 35mm thick, min. 3 sqft or more area , , katla for strip paving 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , upto 900 sq.cm , , 901 to 2300 sq. cm , , more than 2300 sq.cm , , polished kota stone (one side polished) , , upto 900 sq.cm , , 901 to 2300 sq. cm , , more than 2300 sq.cm , , marble stone (makrana adanga 20mm thick) , , upto 900 sq.cm , , 901 to 2300 sq. cm , , more than 2300 sq.cm , , marble chips , , marble powder , , marble stone (rajnagar || quality/local 20mm thick) , , upto 900 sq.cm , , 901 to 2300 sq. cm. , , more than 2300 sq.cm , , stone frame , , single patam size 100 x 75mm. , , double patam size 125 x 75 mm. , , stone slabs , , up to 1.5 m length, minimum 40mm thick , , 1.5 m to 2.40 m length, minimum 50mm thick , , 2.4 m to 3.0 m length, minimum 65mm thick , , above 3.0 m length, minimum 75mm thick , , precast tiles/blocks , , glazed size-30x45 cm , , mosaic size-40mm thick , , vitrified size-60x60 cm , , interlock tiles/brick/block for road work , , cement interlocking block m-30grade, 60mm thick , , cement interlocking block m-30grade, 80mm thick , , cement interlocking block m-30grade, 100mm thick , , fr pvc insulated copper conductor single core cable isi marked , , 1.50 sq mm. , , 2.50 sq mm. , , 0.50 sq mm. , , 1.00 sq mm. , , 4.00 sq. mm. , , 6.00 sq. mm. , , local wood with fittings (for doors, windows and furniture) , , mango , , acacia , , other , , factory made doors (30mm thick, solid core single leaf) , , structural steel , , iron (tor steel fe 415/500 for reinforcement) , , winding wire 18 gauge , , iron guard , , conical iron/square bar/leaf/angle iron , , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage , , forged , , iron mesh (24 gauge, 14 mesh) , , cement concrete lattice sky underworld 40mm thick , , glass , , 3 mm thick glass , , color paint , , inamil paint , , distemper (water bound) , , for lime whitewashing(aras/kali) , , primer (for iron / wood) , , petroleum products , , , diesel hsd , , mobil oil , , bitumen shalitax board (25 mm thick) , , plain sheet , , gi sheet 22 gauge (0.80 mm) , , gi sheet 24 gauge (0.63 mm) , , m.s. sheet 22 gauge (0.80 mm) , , m.s. sheet 24 gauge (0.63 mm) , , corrugated sheet , , gi sheet 1mm thick , , gi sheet 22 gauge (0.80 m.m.) , , asves

Central Government/Public Sector

CTN :39529200

24 Apr, 2025 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : supply of filter, sl/02/330/001251&6, sout hern , filter element, sl/02/764/05006/42, boil er , suction strainer, sl/02/764/05006&07 , oil cooler assy, sl/02/764/05006&5, boiler , lube oil regulator, sl/02/330/001251&38 , 3-way ball valve, sl/02/330/00125189 , gauge glass, sl/02/330/001251&28, sout hern , needle valve, 1/4in, 30, southern, pafa n los , filter element, sl/02/765/05001&41,boi ler , suction strainer, boiler , fan,rp-dg-222-106-0510, boiler , ball valve, 50nb, 800cl, southern,p afan los , ball valve, sl/02/765/05001/11,bdk, bo iler , globe valve, 15nb, southern,pa fan los , filter element, sl/02/763/05035, boiler , oil cooler, southern lub., , ball valve, 3way,id lub system, nd40, cl150 , sight flow indicator, sl/02/844/05 347 , gate vlv,25nb, cl800, southern, pa fan los

State Government

CTN :40052658

28 Apr, 2025 1.00 Crore

Jalore - Rajasthan

Tender For rc for goods and equipment for fy 2025-26 as per bd-, step/step/step, , mud masala, , lime from kali bhatta for lime masonry work, , cement, , ppc, , white cement, , fine aggregate, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry work), , ballast stone/brick (for other than road work), , 40mm measuring stone (hand broken grit) (cut voids 1/11), , and yair werner, , 20mm grit stone (broken by crusher), , 12/10/6mm grit stone broken by crusher., , brick ballast, , child card deduction in any neet prediction, , 3-40 mm crushed stone aggregate (voids cart 1/11, , 3-40mm hand broken stone rod (cut voice 1/11), , 0-45mm. hand broken stone aggregate (voids cart 1/11), , val (voids cart 1/6), , (cut the voice 1/6), , edging material(pi 4-6)(cut voice 1/6), , 144.511/30 cm), , dharm category (1st class), , although, , (pora devasi), , , ii class, , soling / kharanja / masonry stone, , chinrai beradda (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height saikhara, , jodhpuri type stone slats / ghap / katal pieces (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sili, coping, linter, anu, an, , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , up to 175-100mm thickness, , upto 100-150mm thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , gojish kota slolawek pradesh polish, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , 900 square meters, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble chips, , marble powder, , marble stone (rajnagar ii quality/local 20mm thick), , upto 300 sq.cm, , 201 to 2300 sq. cm, , more than 2300 sq.cm, , single patam size 100 x 75mm., , double patam size 125 x 75 mm., , stone slabs, , up to 1.5 m length, minimum 40mm thick, , 5 m to 2.40 m length, minimum 50mm thick, , .4 m to 3.0 m length, minimura 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , tacking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , pvc insulated copper conductor single core cable isi marked fr papaya, , 1.50 sq mm., , 12.50 said that c, , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 5.00 sq. mm., , 17, , doors made of local wood with fittings, wood and tiles, , 17.1, , mango, , 17.2, , acacia, , 17.3, , other, , 17.4, , factory made doors (30mm thick, solid core single leaf), , 18, , structural steel, , 18.1, , iron (tor steel fe 415/500 for reinforcement), , 18.2, , winding wire 18 gauge, , 18.3, , iron guard, , 18.4, , conical iron/square bar/leaf/angle iron, , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and, , 18.5, , 14 guage strad/14 guage, , 119, , drain, , 19.1, , iron mesh (24 gauge, 14 mesh), , 20, , glass, , pani yakash gannal 10mm beads, , 20.1, , 3 mm thick glass, , 21, , complexion belly, , 21.1, , inamil paint, , 21.2, , distepar (water bound), , 21.3, , for lime plastering (aras / kali), , 21.4, , primer (for iron / wood), , petroleum products, , 2, , 2.1, , diesel hsd, , 2.2, , mobil oil, , 2.3, , bitumen shalitax board (25 mm thick), , 3, , plain sheet, , 3.1, , gi sheet 22 gauge (0.80 mm), , 3.2, , j.j. sheet 24 gunj (0.63 mm), , ms sheet 22 gauge (0.80 mm), , , m.s. sheet 24 gauge (0.63 mm), , gi sheet 1mm thick, , gi sheet 22 gauge (0.80 m.m.), , asvest cement sheet 6mm (2.5/2.75x1m), , other sheets, , pa.wa.sa. blanket mm ??? ???, , lightruf expo sheet green yellow (183x

State Government

CTN :40053822

28 Apr, 2025 1.00 Crore

Jalore - Rajasthan

Tender For rate contract for goods and equipment supply work for fy 2025-26-, 1, , paila/kankar/jhajhra, , 2, , mud masala, , 3, , lime from kali bhatta for lime masonry work, , 4, , cement, , 4.1, , ppc, , 4.2, , white cement, , 5, , fine aggregate, , 5.1, , sand/gravel, , 5.2, , gravel - local, , 5.3, , rakhi (fly ash), , 5.4, , surkhi, , 5.5, , stone dust (in masonry work), , 6 ballast stone/brick (for other than road work), , 6.1, , 40mm measuring stone (hand broken grit) (cut voids 1/11), , 6.2, , 6.3, , 6.4, , 6.5, , 7, , 40mm grit stone (broken by crusher) (cut voids 1/11), , 20mm grit stone (broken by crusher), , 12/10/6mm grit stone (broken by crusher), , brick mortar, , material for road work (including 5 km lead), , 7.1, , 63-40 mm crusher broken stone aggregate (cut voids 1/11, , 7.2, , 63-40mm hand broken stone aggregate (cut voids 1/11), , 7.3, , 90-45mm. hand broken stone aggregate (cut voids 1/11), , 7.4, , quarry rubbish (cut voids 1/6), , 7.5, , gravel (voice kart 1/6), , 7.6, , kankar (cut wads 1/6), , 7.7, , binding material (pi 4-6) (cut voids 1/6), , 8, , bricks (22.5 x 11 x 7.50 cm), , 8.1, , first class, , the ii class, , soling / kharanja / masonry stone, , chinnai berdha (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height for road/kharanja work), , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sill, coping, lintel, tand, almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , upto 100-150mm) thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble chips, , marble powder, , narbal stone (rajnagar ii quality/ local 20mm thick), , upto 200 sq.cm, , 01 to 2300 sq.cm, , more than 300 sq. cm, , stone frame, , kal paitham size 100 x 75 mm., , force plate size 125 x 75 mm., , stone slabs, , p to 1.5 m length, minimum 40mm thick, , 5 m to 2.40 m length, minimum 50mm thick, , 4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , - cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core cable isi marked, , 1.50 sq mm., , 2.50 sq mm., , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 6.00 sq. mm., , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30mm thick, solid core single leaf), , structural steel, , iron (tor steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , conical iron/square bar/patti/angle iron, , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and, , 14 guage strad/14 guage, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky underworld 40mm thick, , lass, , mm thick glass, , c-paint, , namil paint, , distemper (water bound), , lime - for whitewashing (aras / bud), , primer (for iron / wood), , petroleum products, , diesel hsd, , mobil oil, , bitumen shalitax board (25 mm thick), , plain sheet, , gi sheet 22 gauge (0.80 mm), , gi sheet 24 gauge (0.63 mm), , m.s. sheet 22 gauge (0.80 mm), , and, , format, , gram panchayat, thalwa, , , m.s. sheet 24 gauge (0.63 mm), , corrug

Liquid Glass Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

State Government

State Government

Central Government/Public Sector

State Government

State Government