Latest liquid petroleum gas Tenders | Government liquid petroleum gas Tenders

Central Government/Public Sector

CTN :45077277

07 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of bmc gas to detailed description lpg, petroleum cutting gas mixedwith anadditive, conforming to heating value like minimum neutralflame temperature 2950degreecelcius, total heat emission-23244kcal-m cubic (kilocalory per cubicmtr), total heat value-12030kcal-kg specific gravity (in gaseous state)-1-52,vapour pressure(at 37.8 degree celcius) -120 psi and boiling range (-2) degreecelcius.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :44980302

11 May, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : supply of gas cutting nozzle for acetylene - anme size 3/64 make-coolex esab, ador or messer or weld star or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44698679

06 May, 2026 1.39 Crore

Bhilai - Chhattisgarh

Tender For bid to ras providing of custom bid for services - various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, a

Central Government/Public Sector

CTN :44855970

11 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of solenoid valves for gas cutting machines - 2/2 way normal closed , solenoid valve fr , 2/2 way normal closed , solenoid valve fr , 5/2 way pneu. d.c. valve fr clamping cyl , 5/2 way pneu. d.c. valve fr sample torch , vlv , sol , 2/2wy , 1/2in , 24v dc , 0.5-10bar , vlv , ctrl , flow control valve fcv , 1/2 inch bsp f , 10bar , 1/2in

Central Government And Public Sector

CTN :45072192

25 May, 2026 9.50 Lacs

Mumbai - Maharashtra

Tender For providing of custom bid for services - service contract for degassing, devalving, defacing, cutting and disposal of compressed gas cylinders

CTN :45066526

09 May, 2026 NA

Kharagpur - West Bengal

Tender For supply of rubber hose for oxy-acetylene for welding and cutting with woven reinforcement in blue colour. to be used for oxygen gas. size: nominal bore 8.0 mm and length 15 mtrs. having the marking of month and year of manufacturing.material and specification : is: 447 / '88 (4th rev.) with amendment no.1 of may 2002 (isi marked) [ warranty period: 30 months after the date of delivery ]

CTN :45057581

16 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of

Central Government/Public Sector

CTN :45057831

22 May, 2026 NA

Ropar - Punjab

Tender For tender for supply of cutting nozzle -cutting nozzle -1 , cutting nozzle -2 , cutting nozzle -3 , gas cutting torch , flashback arrestor

Central Government / Public Sector

CTN :45066217

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - casnub bogies of side frames bolsters : actual lot 03122605 0430 pl no. 98117117 (15) (hsn code 72044900-gst 18%-on fcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads.(gas cutting only two cuts is permitted for side frames and bolsters and bogies 6 cuts to loadable size for lorry). location road no.2 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government / Public Sector

CTN :45056801

04 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of liquefied petroleum gas for industrial application, type-4.1 commercial propane to is;4576-2021, suitable for metal cutting purpose in railway workshop/sheds. net capacity of gas per cyclinder will be 19 kgs. [ warranty period: 30 months after the date of delivery ]

Liquid Petroleum Gas Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors