Latest liquid pump Tenders | Government liquid pump Tenders

Central Government/Public Sector

CTN :45282720

25 Jun, 2026 NA

Sundergarh - Odisha

Tender For bid to ras bid to ras supply of carbonaceous hearth grouting material -carbonaceous hearth groutingmaterial paste for blast furnace suitablefor injection through shell wallby pressure pump to arrest gasand flame leakages. shelf lifeminimum 120 days after receiptin rsp with good fluidity.

Central Government And Public Sector

CTN :45609277

09 Jul, 2026 NA

Kalpakkam - Tamil Nadu

Tender For air driven low pressure liquid pumps with pressure ratio 1: 4 as per attached specification , seal kit for low pressure pump , valves for lp pump

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

State Government

CTN :45494998

01 Jul, 2026 98.0 Thousand

Multi City - Chhattisgarh

Tender For modification of speed breakers in btg area & base frame grouting of pump foundation of ash slurry pump house & geho pump house at 2x500mw, abvtps cspgcl marwamodification of speed breakers in btg area & base frame grouting of pump foundation of ash slurry pump house & geho pump house at 2x500mw, abvtps cspgcl marwa.

CTN :45498922

20 Jun, 2026 42.97 Lacs

West Kameng - Arunachal Pradesh

Tender For supply of pc stand 12.7 mm dia 7 pay class 11 having ultimate tensilestrength not less than 187 kg per sqmm , sheathing corrugated hdpe pipe , anchorage cone 12 t 13 , bearing plate 12 t 13 , coupler for sheathing pipe , sheathing tape 3 inch thick , profiler for pre stressing cable , multipull pre stressing jack 4000 mg sutaible for 19t13 hydraulic jack with hydraulic pump as per specification enclosed , grouting pump with agitator , drainage spout 210 x 210 mm , strip seal expansion joint 11.40 mtr long , neoprene rubber pad size 900 mm x 580 mm x 10 mm neopene pad 580 x 10 th as per specification enclose

corporations/Associations/Others

CTN :45339670

29 May, 2026 NA

Almora - Uttarakhand

Tender For auction sale of scrap from works / products old & used gi sheet,scrap reinforcement steel ms from works / products smallcut pieces aii sizes,miscellaneous ms scrap,scrap structural steel ms micro sillca silo 15mt cap.,transit mixer drum capacity 6cum make schwing stetter model am 6 qty 1 no,air compressor 2stage 2cyl 15hp,air compressor 2 stage 2 cylinder 15hp 40-60 cfm - 7kg/sqcm qty 1 no.,grouting pump type

CTN :44819940

23 Apr, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of hydraulic pump for wheel press machine complete pump system (lbs400) specification :- type: - lbs400/thap 300e air drive pressure: 3-8 bar max. outlet pressure (at air drive pressure of 08 bar): 3200 bar flow rate: 0.48 litre/min generation of pressure: shineeast air drive liquid pump (g400) pressure ratio: 400:1 or 500:1 air consumption: 0.6 to 1.0 m3/min operating medium: oil, water, non corrosive medium driving medium: compressed air net weight: 30 kg dimension (lxwxh):500x 350x 530mm make : shineeast/ skf ]

CTN :44470492

17 Apr, 2026 NA

Parganas - West Bengal

Tender For corrigendum : stabilization of soil layers underneath the proposed additional kulti pump house 2400 cusec by providing poly urethane pu curtain grouting and cement bentonite grouting including soil exploration at kulti, haroa, north 24 parganas - - stabilization of soil layers underneath the proposed additional kulti pump house (2400 cusec) by providing poly urethane (pu) curtain grouting and cement bentonite grouting including soil exploration at kulti, haroa, north 24 parganas.

Central Government/Public Sector

CTN :44736841

17 Apr, 2026 NA

Raigad - Maharashtra

Tender For request of budgetary quote for supply, installation, testing and commissioning of safety circle inside port premises near immigration center 1). signage led screen with metal fabrication support metal fabrication for screen & logo providing and installing branding led circular shape screen, including supply of led display. panel. ms fabrication frame structure with proper support, anchoring and alignment, internal wiring, power supply arrangement, weather protection, testing and commissioning. complete in all respects as per approved design and site requirements. 2). turbine tree 3). fountain providing, supplying, installing. testing and commissioning of 10 nos. 1" foam nozzles with accessories and 16 nos. 12v, 18w underwater rgb led lights. supply and installation of 2 nos. kirloskar brothers limited make 5hp, 440v open well pumps with related fittings. providing and commissioning of 2 nos. electrical control panels with dol starter, elcb and overload protection system. complete upvc astm plumbing inside pond and 150 meters of 0.5 sq.mm x 4 core isi flexible cable for pump and lighting work. 4). mosaic tiles in fountain/pond area 5). providing and fixing mosaic tiles in fountain/pond area, including cleaning and surface preparation, application of waterproof adhesive, proper laying with alignment, epoxy grouting of joints, edge finishing and curing, complete in all respects as per site requirements water proofing providing and applying waterproofing treatment to fountain/pond area, including surface preparation, crack filling, application of approved waterproofing chemical/compound in required coats, curing, and testing for leakage, complete in all respects as per site requirements. 6). light pole providing and erecting metal street light pole of approved height and design, base plate, anchor bolts, internal wiring provision, painting/coating for corrosion protection, and complete installation in all respects as per site requirements. 7). acrylic signage providing and fixing acrylic signage, including laser-cut acrylic letters, uv printing as required, ms frame for support, led backlit provision. proper alignment and mounting, complete in all respects as per approved design and site requirements. 8). rcc work providing and laying rcc slab of m25 grade having thickness 250 mm to 300mm 9). bermuda carpet effect grass with plants providing and executing landscape work including preparation and dressing of soil, supply and plantation of approved shrubs, ornamental plants and trees with manure and watering system, laying of natural/lawn grass with proper leveling and rolling, and decorative pebble work around plants and pathways for aesthetic finish, complete in all respects as per approved layout and site requirements. 10). granite top & wall cladding with required wall & plaster work providing and fixing granite top and wall cladding work, including required surface preparation, necessary wall construction plastering, adhesive fixing, proper alignment, joint filling, edge polishing and finishing. complete in all respects as per approved design and site requirements. 11). electrical lights & points providing, supplying. installing. testing and commissioning of electrical main line including supply and laying of required cables, conduits, distribution connections, and complete wiring for all lights, along with supply of fixtures, fittings, accessories, labour charges and testing, complete in all respects as per site requirements. 12). main line of water supply & return providing, supplying. installing. testing and commissioning of main water supply and return line system, including excavation, supply and laying of approved quality pipes, fittings, valves, joints, supports, connection to pumps/tanks, pressure testing and commissioning, complete in all respects as per site requirements. 13). ss metal logo on top providing and installing 12 feet height ss-(stainless steel) metal revolving logo structure, including