Latest liquid transmitter Tenders | Government liquid transmitter Tenders

Central Government/Public Sector

CTN :45743718

13 Jul, 2026 NA

Danapur - Bihar

Tender For 250 kva diesel generator set with amf control panel, power generator installation configuration as defined in cpwd general specifications for electrical works-part-vii (dg set) -fixed (power generators are permanently installed), nominal rated capacity (kva)-250, rated engine power(kwa)- 110% of the required powered at stp (standard temperature pressure) i.e equal ? to (nominal rated capacity (kva) of power generator any auxiliary power consumption by the power generator) x power factor (0.8)/alternator efficiency , type of governor-electronic, rated rpm of engine(rpm)-1500, fuel-high speed diesel (hsd),control panel-amf control panel , installation- with installation-inclusive in the scope of supply, warranty on complete power generator/dg set-24 months , no . of phase- 3, number of cylinders-6,starting voltage-24, type of alternator-brushless, fuel tank capacity- 600 liter, battery capacity(ah)-100,no. of battery2, testing report available for (test/approval)-type approval certificate for the specified rating of the power generator from any of the designated agency authorized by cpcb,cop certificate for engine type test report and endurance test report for engine as per is :10001 latest/ls:10002 latest,type test report for alternator as per is : 13364 (part-1) latest/is: 13364 (part-2) latest to prove conformity to the specification , make-cummins power, greaves, kirloskar or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45546255

13 Jul, 2026 NA

Patna - Bihar

Tender For corrigendum : 250 kva diesel generator set with amf control panel, power generator installation configuration as defined in cpwd general specifications for electrical works-part-vii (dg set) -fixed (power generators are permanently installed), nominal rated capacity (kva)-250, rated engine power(kwa)- 110% of the required powered at stp (standard temperature pressure) i.e equal ? to (nominal rated capacity (kva) of power generator any auxiliary power consumption by the power generator) x power factor (0.8)/alternator efficiency , type of governor-electronic, rated rpm of engine(rpm)-1500, fuel-high speed diesel (hsd),control panel-amf control panel , installation- with installation-inclusive in the scope of supply, warranty on complete power generator/dg set-24 months , no . of phase- 3, number of cylinders-6,starting voltage-24, type of alternator-brushless, fuel tank capacity- 600 liter, battery capacity(ah)-100,no. of battery2, testing report available for (test/approval)-type approval certificate for the specified rating of the power generator from any of the designated agency authorized by cpcb,cop certificate for engine type test report and endurance test report for engine as per is :10001 latest/ls:10002 latest,type test report for alternator as per is : 13364 (part-1) latest/is: 13364 (part-2) latest to prove conformity to the specification , make-cummins power, greaves, kirloskar or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45726505

20 Jul, 2026 45.00 Lacs

Sonitpur - Assam

Tender For repair/maintenance of diesel generator set with central panel and other connected items at zone 5 and 1(a,b,c) zone 1, 3 (a and b), zone 2 and zone 4 under ge (s) tezpur - maint and servicing of dg set 320-400 kva conopy type with amf panel (if installed ), through authorise service agency of oem , including replacment of defective/wornout parts with new spares such as filters, gaskets, v belts, engine oil, coolant for radiator rubber hoses with clamps, nuts bolts and cleaning of alternator with vaccum cleaner , including greasing of bearings of engine and alternator, tappet setting, checking of batteries, adding distilled water and cleaning of pol tank and radiator etc complete all as specified and directed.note:- 1. spares required for above maint will be measured and paid separately under relevent items of schedule. 2. all breakdown calls should be attended., all as per item no-1 above but for dg set of capacity 180-250 kva complete all as specified and directed, all as per item no-1 above but for dg set of capacity 125-160 kva complete all as specified and directed, all as per item no-1 above but for dg set of capacity 40-100 kva complete all as specified and directed, all as per item no-1 above but for dg set of capacity 10-35 kva complete all as specified and directed, supply only fuel filter for 300-400 kva dg set, complete all as specified and directed, supply only fuel filter for 125-250 kva dg set,complete all as specified and directed complete all as specified and directed, supply only fuel filter for 10-100 kva dg set,complete all as specified and directed, supply only lub oil filter for 300-400 kva dg set,complete all as specified and directed, supply only lub oil filter for 125-250 kva dg set,complete all as specified and directed, supply only lub oil filter for 10-100 kva dg set,complete all as specified and directed, supply only air cleaner filter ( inner and outer ) for 300-400 kva dg set, complete all as specified and directed, supply only air cleaner filter (inner and outer ) for 125-250 kva dg set,complete all as specified and directed, supply only air cleaner filter (inner and outer ) for 10-100 kva dg set,complete all as specified and directed, supply only bypass filter for 300-400 kva dg set, complete all as specified and directed, supply only bypass filter for 125-250 kva dg set,complete all as specified and directed, supply only bypass filter for 10-100 kva dg set,complete all as specified and directed, supply only v belt for 300-400 kva dg set, complete all as specified and directed, supply only v belt for 125-250 kva dg set, complete all as specified and directed, supply only v belt for 10-100 kva dg set, complete all as specified and directed, supply only coolant for radiators complete all as specified and directed., supply only engine oil multi grade 15w40 complete all as specified and directed., s & f in repair display control panel ( base card) for 10 to 100 kva dg set complete all as specified and directed ., s & f in repair display control panel (base card) for 125 to 250 kva dg set complete all as specified and directed., s & f in repair display control panel (base card) for 300 to 400 kva dg set complete all as specified and directed., s & f in repair fuel actuator with o ring for 300 to 400 kva dg set complete all as specified and directed., s & f in repair key switch for 10 to 400kva dg set complete all as specified and directed., s & f in repair coolant temperature sensor (coolent control safety) for 10 to 400kva dg set complete all as specified and directed., s & f in repair amf controller assy for auto/manual operation for 10 to 100 kva dg set complete all as specified and directed., s & f in repair amf controller assy for auto/manual operation for 125 to 250 kva dg set complete all as specified and directed., s & f in repair amf controller assy for auto/manual operation for 300 to 400kva dg set complete all as specified and directed., s & f in rep

Central Government/Public Sector

CTN :45710606

13 Jul, 2026 NA

Aurangabad(Bh) - Bihar

Tender For procurement of cni spares for blue star chillers lcw2 at brbcl - si board,cdco-w040-01,bluestar, mcs control board,cdco-w039-01,bluestar, current transformer,elct-000001-00, smps,elcp-w011-01,bluestar, oil level switch,elot-t020-00,blue star, phase reversal unit,elsp-w001-00, magnum display,bluestar,mcs controller, exp vv seh-175,rcexv-she 175-00,bluestar, timer,3rp15761np30,bluestar, elct expansion valve,rcexv-000000 2-00, oil heater,3101-1052c,bluestar, motor protection dev,ach4405-81,bluestar, temperature sensor,mcs-t100-402, pressure sensor,spps-t004-00,blue star, pressure sensor,mcs-ti-200f-20,blue star, load solenoid valve,rcsl-evr25-00, coil,rcsc-0000001-00,blue star, solenoid valve,rcsl-10001-00,blue star, solenoid coil,rcsc-evr3-00,blue star, control transformer,eatdz0020,blue star

CTN :45711096

03 Jul, 2026 NA

Parganas - West Bengal

Tender For spare parts of scania - hose part no 283136, dust cover part no 190335, seal ring part no 214309, seal ring part no 164900, hose part no 811195, hose part no 188283, control part no 1104198, dash board lock part no nk, head light assy part no 389483, cover part no 310518, plate scania part no 352140, rear toe lock part no nk, lmg bracket part no nk, screw m8x16 part no 808293, oil dipstick (eng ) part no 271225, intermediate part part no 219516, filler tube part no 257754, drain cock (tap) part no 228491, hollow screw part no 17146, hollow screw part no 17384, fuel tank part no 292781, hollow union part no 377424, lock ring part no 804787, piston ring part no 244186, plug part no 244465, plug part no 129386, drive part no 389606/389672, piston part no 367124, disk, outer part no 194428, disc, inner part no 194429, lock ring part no 804793, switch part no 328655, cover part no 317203, intermediate piece part no 254757, regul. valve, front part no 390485, regul. valve, rear part no 390487, elbow connection part no 161901, temperature monitor part no 334383, shim 0, 5 mm part no 274416, drain tube part no 224266, solenoid valve part no 1115802(350127), elbow connector part no 208405, reducing nipple part no 244439, sensor(speed) part no 284154, oil cooler part no 391173, connector part no 275052, journal part no 264043, lubricator part no 806311, three-way nipple part no 248351

CTN :45726004

13 Jul, 2026 NA

Tirunelveli - Tamil Nadu

Tender For purchase of mechanical lab equipments - hydraulic cylinder - bore diameter : 50 mm , stroke length : 250 mm, working pressure : 160 bar , cylinder tube : honded steel , piston rod : hard chrome plated , seals : standard industrial seals, end caps : steel, hydraulic operated directional control valve (dcv) - type: manual spool type dc valve, configuration : 4/2 way, size : ng06(cetop 3) , rated pressure : 210 bar, flow capacity: 20 - 40 lpm, body: hardened steel / cast steel, spool: ground and hardened, ports : clearly marked ( p, a, b, t ) , supply : mounted on training plate , suitable for dismantling and study, a) sliding mesh gear box for dismantling and assembing - max transmitted power 1 to 1.5 hp , torque capacity - 40 to 200 nm,number of speed 3 to 6 , gear module 1.5 to 2 , . gearbox type : sliding mesh forward gears - 3, reverse - yes, gear material - alloy steel, lubrication - splash/ oil, gear teeth : spur, typical gear ratio - 3:2:1 / 2:0:1 /1:3:1, input speed : 0-1800 rpm , housing material : cast iron (b) constant mesh gear box cut section - constant mech gearbox (cut section), gearbox type : constant mech, forward gears : 4 , gear teeth- helical/spur ,dog clutch type - sliding ,lubrication - oil sae 80w90 ,housing - cut section,material -hardened alloy steel, educational features - labelled parts, 3d printer - build volume : 256x256x256 cu.mm ,shell enclosed (plastic & glass ),nozzle 0.4 mm stainless steel included ,max hot end temperature 300 c ,nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm, build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate. max build plate temperature 100 c ,max speed of tool head 500 mm/s ,max acceleration of tool head 20 m/s2 ,supported filament pla, petg,tpu, pva, pet,abs, asa chamber monitoring camera low ,rate camera 1280 x 720/0.5 fps ,timelapse supported ,filament run out sensor : yes, control board fan closed loop control ,auxiliary part cooling fan closed loop control ,air filter activated carbon filter

CTN :45736457

20 Jul, 2026 NA

Asansol - West Bengal

Tender For supply of relay for control electronics "off"/temperature along with accessories for wag-9 & wap-7 (3 phase) locos. as per clw's specn. no. clw/es/3/0066, alt-b, control relay type ca3dn22fw (old), cad 32 fd (new). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45471262

03 Jul, 2026 NA

Kharagpur - West Bengal

Tender For corrigendum : supply of relay for control electronics off/temperature, make-schneider electric france, type- cad 32 fd as per clw's spec. no.-clw/es/3/0066 (alt.- b) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45255749

08 Jul, 2026 NA

Bokaro - Jharkhand

Tender For corrigendum : tender for supply of hea igniter system -hea igniter exciter box , hea igniter cable assembly , hea igniter retractor assembly , hea igniter flexible spark rod assembly , hea igniter spark rod tip , hea igniter guide pipe assembly , local panel , control panel , common manual isolation valve instrument air , air set and air manual isolation valve instrument air with copper tube and fitting from burner front , cooling air one and half inch hard rubber high temperature hose 1500 mm with end clamp , erection materials mounting hardware and other supporting materials cables glands cable lugs

CTN :45416453

22 Jul, 2026 60.10 Lacs

Rohtak - Haryana

Tender For corrigendum : rate contract for 02 years (extendable) for purchase of biomedical waste sharps-blaster/disposable destroyer system and consumables for central store - sharp disposable destroyer system sharps balster sterilization unit(needle blaster) for treatemtn of biomedical waste category-iv make- safe environment solutions the unit is a desktop sized, simple plug & use type which converts the potentially hazardous sharps and syringes form blue bag category to black bag category at the touch of a button the unit is "ce approved". it is also approved by central pollution control board. it has also being recommended by w.h.o. the desk top solution is safe & environmentally friendly for the decontamination of sharps & other soft clinical wastes using non burn technology. machine is portable & can be installed in any part of the hospital without any extra utility requirement, operating on ordinary 230v ac. it effectively prevents second stick injuries which is a major concern as per who reports. user friendly & cost effective using very less power. sharp disposable destroyer consumables disposable canister, disposable 3 to 5 lit. metal canisters to collect the sharps or soft clinincal waste (needles, syringes, scalpel blades etc.) to be heated up to two and a half hours at temperature reaching 185'. canister should be lockable. , sharp disposable destroyer consumables disposable insert it is ldpe, pvc free inserts for sharp disposable destroyer unit. , sticky back paper label roll: thermal paper roll, 100 sticky back stickers per roll for sharp disposable destroyer unit. , active carbon filter active carbon filter for fume's entrapment, minimum 5 inch length, both ends open with suitable sealing gaskets.

Liquid Transmitter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector