Latest lng terminal Tenders | Government lng terminal Tenders

State Government

CTN :45723766

07 Jul, 2026 NA

Ernakulam - Kerala

Tender For deposit lng petronet ltd csme laying 90 mm pvc pipe for providing water supply service connection to lng terminal at puthuvype pipeline work

Central Government/Public Sector

CTN :45652396

02 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for non ac bangladesh coach. note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25parnabang version 3, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securingthe components: - use steel straps or ropes to fimly anchor the components within thewooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorbshocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify thatall components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664839

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for bangladesh ac chair car coaches.note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25paraccbang version 2, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plasticfilm or water proof ability paper, to guard against corrosion. 4. componentarrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45638111

20 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of partition frame for lsdd amrit bharat 3.0 ( (note- colour scheme is as per design letter no md48161 dated- 15/05/2026 ), as per drawing: mp26pfgsab3.0 version 0, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed.8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period:30 months after the date of delivery ] ]

CTN :45558373

14 Jul, 2026 1.06 Crore

Chennai - Tamil Nadu

Tender For packing materials on rate contract basis for the period of one year - group vi (a)- adhesive tape, cello gum tape " (each 60 mtr) panfix (pack of 12), cello gum tape 2 thickness-40 microns (each 60 mtr), brown gum tape 3 thickness-40 microns (each 60 mtr), brown gum tape 2 thickness-40 microns (each 60 mtr), transparent masking tape 2", transparent tape 3", white virgin baniyan cloth waste minimum width 20 cm x 20 cm, baniyan cloth waste colour for all machine, cotton waste white (without any dust and foriegn particles) specification: should be white in colour without any foreign particles should be of cotton waste threads, group vi (b)- despatch materials, bengal twine 6 ply, white high density polyurethane sheet with one side lamination size width 40" inch in roll 1.tape width (in mm) - 2.5 mm 2. mesh size - 10 x 10 3. denier - 700 to 800 4. lamination - laminated with 40 microns ldpe 5. weight of hdpe sheet with one side lamination - 75 gm (+ 2%) per square metre, plastic rope (binding ), plastic rope (hd ), corrugated box 12 x 9 x 8 (inner size) ii) ply : 5 ply iii) paper : kraft paper 120 gsm iv) flute type : narrow (150 to 185 corrugation per meter) height of corrugation : 2.1 to 2.9 mm v) bursting strength : 7 (+ 1) vi) stapling : single stapling staple width " the staples should be 2.50" apart, corrugated box 25.5 x 12 x 9 (inner size) ii) ply : 7 ply iii) paper : kraft paper 120 gsm iv) flute type : narrow (150 to 185 corrugation per meter) height of corrugation : 2.1 to 2.9 mm v) bursting strength : 9 (+ 1) vi) stapling : single stapling staple width " the staples should be 2.50" apart, corrugated box 19 x 12 x 6 (inner size) ii) ply : 5 ply iii) paper : kraft paper 120 gsm iv) flute type : narrow (150 to 185 corrugation per meter) height of corrugation : 2.1 to 2.9 mm v) bursting strength : 7 (+ 1) vi) stapling : single stapling staple width " the staples should be 2.50" apart, polythene covers with machine sealing 19 x22 thickness in microns ldpe, perforation strip (16 tpi), box strapping roll (heat set-virgin quality)width-12mm,thickness-0.7mm

Central Government/Public Sector

CTN :45567452

16 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of 1.dome cum reservoir assly.complete (l.h) for fiat bogie with air springs todrg. no. 66704005, col.i, alt. "b" = 2 nos . 2.dome cum reservoir assly.complete (r.h) for fiat bogie with air springs to drg no. 66704011, col.i, alt. "b" = 2 nos. red oxide zinc chromate primer only to be coated to specification is:2074 of thickness 15-20 microns. specialcondition : material specn.no. en10025-5, 2004, s355j2w+n to be used in lieu of en10025/29, s355j2g3 wherever mentioned in detail drawing. items are to be packed in set. packing instruction. 1. dome shall be supplied in coach sets consisting of lh - 2 nos & rh - 2 nos. proper pairing of lh & rh domes shall be ensured. 2. two coach sets of domes (lh - 4 nos & rh - 4 nos) shall be packed in wooden or metal pallet to facilitate safe handling and transportation. 3. dome shall be secureley fastened to the pallets using metal strapping to prevent movement or displacement during transit. 4. each pallet shall be clearly labelled with: item description, manufacturer's name, purchase order(po) number and quantity. 5. the threaded portions shall be adequately protected with suitable protective covers to avoid damage during handling, storage and transportation. 6. the 85mm dia spigot hole shall be covered with plastic or rubber caps to prevent damage, dust ingress and entry of foreign materials. 7. any water remaining inside the domes after hydro testing shall be completely drained before packing to prevent corrossion and contamination during storage and transit. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45545595

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of 1.dome cum reservoir assly.complete (l.h) for fiat bogie with air springs todrg. no. 66704005, col.i, alt. "b" = 2 nos . 2.dome cum reservoir assly.complete (r.h) for fiat bogie with air springs to drg no. 66704011, col.i, alt. "b" = 2 nos. red oxide zinc chromate primer only to be coated to specification is:2074 of thickness 15-20 microns. specialcondition : material specn.no. en10025-5, 2004, s355j2w+n to be used in lieu of en10025/29, s355j2g3 wherever mentioned in detail drawing. items are to be packed in set. packing instruction. 1. dome shall be supplied in coach sets consisting of lh - 2 nos & rh - 2 nos. proper pairing of lh & rh domes shall be ensured. 2. two coach sets of domes (lh - 4 nos & rh - 4 nos) shall be packed in wooden or metal pallet to facilitate safe handling and transportation. 3. dome shall be secureley fastened to the pallets using metal strapping to prevent movement or displacement during transit. 4. each pallet shall be clearly labelled with: item description, manufacturer's name, purchase order(po) number and quantity. 5. the threaded portions shall be adequately protected with suitable protective covers to avoid damage during handling, storage and transportation. 6. the 85mm dia spigot hole shall be covered with plastic or rubber caps to prevent damage, dust ingress and entry of foreign materials. 7. any water remaining inside the domes after hydro testing shall be completely drained before packing to prevent corrossion and contamination during storage and transit. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45405662

26 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of 1.dome cum reservoir assly.complete (l.h) for fiat bogie with air springs to drg. no. 66704005, col.i, alt. "a" = 2 nos. 2.dome cum reservoir assly.complete (r.h) for fiat bogie with air springs to drg no. 66704011, col.i, alt. "a" = 2 nos. red oxide zinc chromate primer only to be coated to specification is:2074 of thickness 15-20 microns. special condition : material specn.no. en10025-5, 2004, s355j2w+n to be used in lieu of en10025/29, s355j2g3 wherever mentioned in detail drawing. items areto be packed in set. packing instruction. 1. dome shall be supplied in coach sets consisting of lh - 2 nos & rh- 2 nos. proper pairing of lh & rh domes shall be ensured. 2. two coach sets of domes (lh - 4 nos & rh - 4 nos) shall be packed in wooden or metal pallet to facilitate safe handling and transportation. 3. dome shall be secureley fastened to the pallets using metal strapping to prevent movement or displacement during transit. 4. each pallet shallbe clearly labelled with: item description, manufacturer's name, purchase order(po) number and quantity. 5. the threaded portions shall be adequately protected with suitable protective covers to avoid damage during handling, storage and transportation. 6. the 85mm dia spigot hole shall be covered with plastic or rubber caps to prevent damage, dust ingress and entry of foreign materials. 7. any water remaining inside the domes after hydro testing shall becompletely drained before packing to prevent corrossion and contamination during storage and transit. [ warrantyperiod: 72 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :44919990

19 May, 2026 NA

Delhi - Delhi

Tender For corrigendum : rate contract for hiring lng road tankers for transportation of lng from ennore/ dhamra/ dahej/ kochi/ any other lng terminal to indianoil customer sites/ cgd hubs/ retail outlets at various locations.

CTN :44719428

22 Apr, 2026 6.00 Lacs

Gandhinagar - Gujarat

Tender For providing of annual maintenance contract of integrated security and surveillance system - cctv system and access control system available within operation and utility areas of lng terminal; non-comprehensive; as per atc document; consumables to be provided by buyer; industrial; control ..

Lng Terminal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors