Latest load cell Tenders | Government load cell Tenders

State Government

CTN :45738109

10 Jul, 2026 63.67 Lacs

Jaipur - Rajasthan

Tender For load cell, s. s. alloy, capacity 500 kgf , load cell tool steel, capacity- 300kgf , load cell ss alloy capacity 300kgf,

State Government

CTN :45730100

04 Jul, 2026 NA

Koradi - Maharashtra

Tender For procurement of spares for wagon tippler weighbridges & belt weighers installed at chp 3x660mw, ktps, koradi. - chpelect load cell for 30 mt cap, load cell capacity 45 mt, canister type, bw 1250 tph load cell, bw 1250 tph remote indicator, bw 1250 tph speed sensor assy, weigh bridge frame turn buckle, hylum pads for load cell of 50mt road wb, load cell mount with strut,button,plug, reputed 100 mt top cup for load cell etc..

corporations/Associations/Others

CTN :45739965

30 Jul, 2026 NA

Aligarh - Uttar Pradesh

Tender For load cell for 80 mt weigh bridgemake-zemic

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

Central Government And Public Sector

CTN :45740261

21 Jul, 2026 NA

Ramgarh - Jharkhand

Tender For load cell, merrick, sec19125-15

CTN :45723969

08 Jul, 2026 NA

Sitapur - Uttar Pradesh

Tender For electricity distribution block and head] c.t.p.t. unit of various relays in the area of work of sitapur] metering cubicle p.t.] electrical sub-station etc. material of electricity storage center sitapur to electrical test section sitapur and from electrical test section sitapur to the site work of installation designation jim rntpekpabjpvd vf mmm. appjanchanat

CTN :45716328

27 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of portable universal calibrating machine for load cell along with accessories as per specification

CTN :45642888

03 Jul, 2026 50.47 Lacs

Purnia - Bihar

Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45706577

11 Jul, 2026 5.50 Lacs

Kheri - Uttar Pradesh

Tender For supply of 80 mt mill gate spares parts load cell capacity digital, make (amity,zemic,trix) , load cell assembly capacity 30 tan, make (load master) , cuppling base plate,make (amity,zemic,trix) , juction box 08 port digital, make (amity,zemic,trix), extra display 2 ×1 digital,make (amity,zemic,trix), it machine digital, make (amity,zemic,trix)

CTN :45706583

11 Jul, 2026 1.60 Lacs

Kheri - Uttar Pradesh

Tender For supply of pitless kate ke spares parts - load cell capacity 10 ton, make (strack/ a.d.i/jamic/kaily) , load cell assembly , juction box 04 port, make amity, cuppling base plate

Load Cell Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector