Latest load haul dump machine scrap Tenders | Government load haul dump machine scrap Tenders

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

corporations/Associations/Others

CTN :45667085

29 Jun, 2026 NA

Faridabad - Haryana

Tender For fire work at esic haryana. - (a) supplying, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required :(b) horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp squirrel cage induction motor, tefc, synchronous speed 1500 rpm, suitable for operation on 415 volts, 3 phase 50 hz, ac supply with ip 55 protection for enclosure, horizontal foot mounted typewith class-f insulation, conforming to is-325.(d) m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plasteredwith anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required:(diesel driven pump)(b) horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulatedwith 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event offault with audio indications, painted with post office red colour etc. as required.(d) m.s fabricated, common base plate, coupling, couplingguard, foundation bolts etc. as required.(e)suitable cement concrete foundation duly plasteredand with anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (jockey pump)(b)horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is : 1520.(c) suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class-f insulation, conforming to is : 325.(d) m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plastered and with anti vibration pads., 180 lpm @70m head, fabrication, supply, insallation testing & commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick crca sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required :, incomings630a, 50ka 4 pole mccb, ics=100% icu rating digital voltmeter 0-500v with selector switch ammeter (0-630 a) with selector swtich & cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 800amps outgoings (note : all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps)main fire pump200 amp, 50ka tpn mccb, ics=100% icu, with f

CTN :45419374

26 Jun, 2026 NA

Dantewada - Chhattisgarh

Tender For corrigendum : supply of computer , stock register , microwave , refrigerator , packing material for storage , sample reports , juicer mixer , basic knives set , weighing scale , measuring spoons and cups , bowls , scales , whisker , rolling pin , spoons , measuring spoons and jugs , sieves and relevant tools , fitments , hot cabinet , serveries , cleaning and sanitizing equipment , sample of escalation matrix , organisation structure , handouts of ipr guidelines , safety glasses , head protection , rubber gloves , safety footwear , warning signs and tapes , fire extinguisher , first aid kit , different types of linen , tableware , cutlery , crockery , napkin , table , chair , sample feedback form , bill book , card swiping machine , glassware , whiteboard , flip chart , duster , projector , projector screen , laptop , training kit , participant handbook and sops , markers , chalk box , electric induction , lpg cylinder , work station , tandoor , oven , deep fat fryer , kitchen work table , kitchen rack , dry storage cabinet , exhaust and fresh air fans , fly killer , steel stock pot , steel sauce pan , steel omelet pan , iron work , piping bags , slicer , whisk , muffins mould , tartlet mould , pie mould , bread mould , chopping board , steel skimmer , steel turner , steel ladle , steel rice colander , steel strainer , caramel custard mould , baking tray , ss storage tray , rotary cake stand , plastic crates , tandoor seekhs , parat , pizza cutter , ss katoris , tawa with handle , masala box , ac * /bid number : gem/2026/b/7600742 + /dated: 03-06-2026 ' ' / bid document 1 / 67

CTN :45647214

30 Jun, 2026 4.00 Lacs

Sonipat - Haryana

Tender For contract jobs of off season 2026 - contract jobs of off-season 2026., chipping, cleaning & painting/white washing ofc) spray pond & injection channels along with injection house.d) etp with all equipment s and channel from plant to etp., ) chipping, cleaning and painting of all equipment s & machinery centrifugal station (all c/f machine, pug mill , magma mixture, gutters etc.) during off season 2026.b) chipping, cleaning and painting in drier house i.e. hoppers, grader, all sugar elevators, sugar bins, power built machines, bag closure stitching machines, conveyor chains etc., chipping, cleaning & painting white washing/painting of all equipment of clarification house(juice weighing scale, door, oliver filters lime station, sulphur furnances, juice sulphitor and syrup sulphitor along with related jobs., a) chipping, cleaning of top tube plates and bottom tube plates of all juice heaters, evaporators along with ffes etc.b) chipping, cleaning of all juice heaters, evaporators, ffes, all save all s exhaust lines, vapour lines, all valves, all syrup lines, siphons, all syrup lines etc., a) chipping, cleaning & painting, at pan station, top & bottom tube plate with along related jobs.b) chipping, cleaning & painting of all crystallizers along with related jobs.

CTN :45634156

01 Jul, 2026 45.51 Lacs

Jodhpur - Rajasthan

Tender For tender for e procurement of supply and installation of equipment and machinery in dtl lab dsrrau jodhpur =- milli-q water assembly, microwave digester, centrifuge (6000-10000 rpm), vortex, digital refractometer, digital ph meter, de-humidifier, tablet disintegration apparatus, hot air oven, mixture grinder, magnetic stirrer with hot plate , melting & boiling point apparatus, sieve shaker (brass), laminar air flow, autoclave apparatus , orbital shaker, hot plate, nitrogen evaporator , laboratory fume hood, fume exhaust blower unit.

CTN :45639270

01 Jul, 2026 45.51 Lacs

Jodhpur - Rajasthan

Tender For tender for e procurement of supply and installation of equipment and machinery- milli-q water assembly, microwave digester, centrifuge (6000-10000 rpm), vortex, digital refractometer, digital ph meter,dehumidifie,tablet disintegration apparatus, hot air oven, mixture grinder, magnetic stirrer with hot plate, melting & boiling point apparatus, sieve shaker (brass), laminar air flow, autoclave apparatus, orbital shaker,hot plate, nitrogen evaporator , laboratory fume hood , fume exhaust blower unit. in dtl lab dsrrau jodhpur.

CTN :45632219

02 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of commercial multifunction steam vessel versatility precise temperature control system with six module tray as per sow , provision of vitrified tile flooring below steam vessel size 8x8 ft pdf layout design mandatory to upload , provision of vitrified tile work with sliding wooden doors below granite cupboard size 10x3 ft , provision of core cutting for fresh water pipeline inlet, electrical wiring inlet drain water outlet , supply and installation of 1 point 1kv grade 16 sq mm 5 core armoured cable x lpe pvc is 7098 with required excavation brick work and cable marker as required 120 rmt approx length , supply and installation of 100 a breaker and 40 a 4pole mccb industrial socket connection , supply and installation of cpvc fresh water pipeline for equipment size 3 by 4 inch 1by 2 inch , supply and installation of commercial g i ducting for steam vessel size length 9 ft with 18 inch exhaust fan , commercial ss table for steam vessel size 3x3x3ft , supply and installation of 25lph industrial ro water purifier with connection , provision of 6w inverter for led touch control panel of steam vessel , installation and commissioning charges if any in addition to above

CTN :45596701

01 Jul, 2026 NA

Khurda - Odisha

Tender For providing of custom bid for services - annual maintenance contract (amc) for galley equipment at ins chilka for a period of one year - chapati making machine, atta kneeding machine, ice cream making machine, vegatable cutting machine, heavy duty mixer grinder, poatato peeler, wet grinder, combi steamer 6 tray, rice boiler, deep freezer, refrigerator, exhaust blower system, cooling sytem, bain marie, pest-o-flash, water cooler & purifier, air curtain, 3, chiller, mist fan, high pressure water washer

CTN :45579450

22 Jun, 2026 5.00 Lacs

Barmer - Rajasthan

Tender For for repair materials and other supplies for electrical and water equipment - modueler fan regulater, modueler fan regulater, wire, wire, wire, wire, modueler switch, modueler switch, modueler sheet, modueler sheet, modueler sheet, modueler sheet, modueler sheet, modueler sheet, plug pin ( socket), exhaust fan, exhaust fan, wall fan machine, mcb 3 pole, mcb 3 pole, mcb 4 pole, mcb4 pole, wire clip, wire clip, wire clip, wire clip, wire clip, wire clip, wire clip, wire clip, lug, lug, lug, lug, lug, lug, lug, lug, lug, lug, lug, lug, steel nipple, steel nipple, steel nipple, steel nipple, steel nipple, steel nipple, steel nipple, steel nipple, steel nipple, u pvc pipe 10 feet, u pvc pipe 10 feet, u pvc pipe 10 feet, u pvc pipe 10 feet, u pvc t loint, u pvc t loint, u pvc t loint, u pvc t loint, u pvc loint, u pvc loint, u pvc loint, u pvc joint, u pvc joint l shape, u pvc joint l shape, u pvc joint l shape, u pvc joint l shape, upyc end closure, upyc end closure, upyc end closure, upyc end closure, upyc elbo, upyc elbo, upyc elbo, upyc elbo, upyc elbo, upyc elbo, upyc elbo, upyc elbo, upyc elbo, upyctee, upyctee, upyc tee, upyctee, upyctee, upyctee, upyctee, upyc tee, upyc tee, upyc reducer, upyc reducer, upyc reducer, upyc reducer, upyc reducer, upyc reducer, upve red ucer, ui'vc reducer, ui'vc i~cdll ce r, ui'vc bruss mt, ui'vc i:lruss mt, l)l've ijrnss mt, ul've ornss mt, upvc bross mt, ul've bruss mt, ui'vc bruss mt, upvc bruss mt, upvc bruss mt, upve bross i't, ui'vc bruss i't, ul've bruss i't, upve bruss i't, ui'vc brass i't, ui'vc bruss i't, upve brass i't, upvc bruss i't, upve bruss i't, upvc bruss elbo, ui'vc brass elbo, upve brass clbo, upvc bruss elbo, upvc brass elbo, upvc bruss elbo, upvc bruss clbo, upvc bruss clbo, upvc bruss elbo, upvc brass tcc, upvc bruss tec, upvc brass tee, upvc brass tee, upvc brass tee, upvc brass tee, upvc brass tee, upvc brass tee, upvc brass tee, cpvc end closure, cpvc end closure, cpvc end closure, cpvc end closure, cpvc elbo, cpvc elbo, cpvc elbo, cpvc elbo, cpvc elbo, cpvc elbo, cpvc elbo, cpvc elbo, cpvc elbo, cpvctee, cpvctee, cpvctee, cpvctee, cpvctee, cpvctee, cpvctee, cpvctee, cpvctee, cpvc reducer, cpvc reducer, cpvc reducer, cpvc reducer, cpvc reducer, cpvc reducer, cpvc reducer, cpvc reducer, cpvc reducer, cpvc brass mt, cpvc brass mt, cpvc brass mt, cpvc brass mt, cpvc brass mt, cpvc brass mt, cpvc brass mt, cpvc brass mt, cpvc brass mt, cpvc brass ft, cpvc brass ft, cpvc brass ft, cpvc brass ft, cpvc brass ft, cpvc brass ft, cpvc brass ft, cpvc brass ft, cpvc brass ft, cpvc brass elba, cpvc brass elba, cpvc brass elba, cpvc brass elba, cpvc brass elba, cpvc brass elba, cpvc brass elba, cpvc brass elba, cpvc brass elba, cpvc brass tee, cpvc brass tee, cpvc brass tee, cpvc brass tee, cpvc brass tee, cpvc brass tee, cpvc brass tee, cpvc brass tee, cpvc brass tee, ~, ~ hoi oifil;, ~hoi('/f1i;, ~t;;, comeil valve head, concil valve, $ ~ ~ t<.l nonnal, ~ ~ nonnal, ~ ~ t<.l nonnal, ~ nonnal, ~ nonnal

CTN :45525406

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For main work : construction of canteen building for the puducherry technological university inside the ptu campus under rusa fund. sub work : providing and fixing of kitchen chimney, gas pipeline connection and kitchen equipment for the canteen building inside the ptu campus under rusa fund (iii call) - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

Load Haul Dump Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others