Latest loader backhoe machine Tenders | Government loader backhoe machine Tenders

State Government

CTN :40730801

25 Jun, 2025 NA

Chamba - Himachal Pradesh

Tender For supply, design, engineering, manufacture, fabrication, testing at manufacturers works of equipment and materials, loading, transportation and delivery and unloading of 1 no. 50/63 mva

CTN :40469638

20 Jun, 2025 497.43 Crore

Bhadradri Kothagudem - Telangana

Tender For corrigendum : drilling, excavation, loading, transportation, dumping, spreading and levelling, etc., of 1038.346 lbcm of in-situ ob (which includes 7.340 lbcm of top soil, 22.009 lbcm of sub soil, 976.866 lbcm of hard ob and 32.131 lbcm of coal), and excavation of 2.948 lbcm of in-situ ob for nallah diversion with conventional equipment, and additional works viz., 6000 shovel hours, 5000 dozer hours and 3,83,000 rmt of drilling at kk ocp, mandamarri area during a period of 48 months.

CTN :40714458

19 Jun, 2025 4.95 Lacs

Hanumangarh - Rajasthan

Tender For supply of bal vatika equipments with installation total 5 works rawatsar - excavation by labour including loading, unloading, disposal soil within initial lead 50 meters and lift up to 1.50 meters in dry or moist including dressing of exacavted area. back filling and dewatering wherever required complete all respect, (hard soil). (bsr item no. 2 b). in hard soil, 1:2:4 , , , , , 1:3 (item no 13a), four seater mgr:- providing and fixing of four seater mgr swing of size 4/5 feet (diameter), 3 feet (height) fabricated with a center pipe/ frame of 50 nb shall be made from c class g.i. pipe and frp material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 50 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately). (non bsr item no. 01, dwdsc/2021-22/6329-443/04.03.2022)., circular swing four seater:- providing and fixing of circular swing four seater of size 6.0 x 5.25 x 5.0 feet fabricated with a center pipe/ frame of 65 nbshall be made from c class g.i. pipe and frp material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 65 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately). (non bsr item no. 02, dwdsc/2021-22/6329-443/04.03.2022)., four seater see saw:-providing and fixing of four seater see saw of size 5.5 x 6.25 x 2.5 feet fabricated with a center pipe/ frame of 50 nb shall be made from c class g.i. material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 50 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or be

CTN :40700537

27 Jun, 2025 NA

Karad - Maharashtra

Tender For bi-annual contract for the work of loading,unloading & transportation of various substation equipment / material under ehv (o&m)dn. karad.

Central Government / Public Sector

CTN :40685457

26 Jun, 2025 24.49 Lacs

Panipat - Haryana

Tender For custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

State Government

CTN :40526456

18 Jun, 2025 NA

Karur - Tamil Nadu

Tender For corrigendum : loading of reels, bundles, copier boxes, note books, providing equipment operators for unloading of reel, shifting work at mayanur godown

Central Government/Public Sector

CTN :40418880

26 Jun, 2025 NA

Durgapur - West Bengal

Tender For corrigendum : design, engineering, manufacture, fabrication / assembly, inspection, shop testing, painting at manufacturer shop, packing, loading and transportation, supply for site, supervision of erection, trial run, and commissioning of electric hoists along with their electrical equipment and standard accessories with attachments as per technical parameters, for up_gradation of blast furnace no. 3 at sail, durgapur steel plant.

State Government

CTN :40662420

25 Jun, 2025 3.15 Lacs

Bellary - Karnataka

Tender For dismantling, lowering loading unloading raising and erecting works of heavy equipment like ht motors ilms, lt motors (37kw and above), afd dc motors and such heavy equipment

Central Government/Public Sector

CTN :40659121

24 Jun, 2025 NA

Bangalore - Karnataka

Tender For supply and installation of godrej cash chest (as per enclosed spec.) for 26 nominated railway station over sbc division with maf authorization form and minimum 03 years onsite warranty. (up loading of manufacture's authorization form - maf, which is given by original equipment manufacture's is mandatory while participating in tender). brand: godrej centiguard 560key lock with fire resistance. [ war ranty period: 30 months after the date of delivery ]

State Government

CTN :40638673

10 Jun, 2025 10.00 Lacs

Nanded - Maharashtra

Tender For e-tender for the work contract for transportation, loading-unloading of failed & repair transformers & other equipment s from repairer agencies, major store nanded to filter unit under degloor division, anywhere in maharashtra as an when required under the jurisdiction of o&m degloor division on full turnkey basis.

Loader Backhoe Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government