Latest loading machine scrap Tenders | Government loading machine scrap Tenders

Central Government/Public Sector

CTN :43268850

12 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For sr.den/central/mas: collection and supply of 50mm size machine crushed stone ballast at ajj ballast depot including loading into bkh wagons & unloading from bkh wagons for various track works

CTN :43217492

24 Dec, 2025 9.66 Lacs

Kunigal - Karnataka

Tender For supply of goods/equipment for the work construction of godown-amcno5 near kh village harinakatte under honnamachanahalli gram panchayath - hoona-nylon rollers, honna-add watering charges at 1 % on labour, brokenstoneaggregate20mmsize, coarse sand ( zone iii(3), cement-portland cement, hoona-add watering charges at 1 % on material, mixer (concrete) - 1cum capacityy, broken stone aggregate 12 mm too 10 mm size, honna-size stone 20 x 20 x 25 cms, honna-plasticizer/superplasticizer, solid concrete blocks 40x20x20 cms5.00 npersqmm, honna-add handling , loading and unloading at 2% on material, honna-add handling , loading and unloading at 1% on material, honna-mason class i (with tools), honna-mason class ii (with tools), honna-mixer (concrete small used in culvert), honna-hom of vibrator 0.71 days, honna-tmt bars fe 500, honna-silver oak or equivalent planks 38 mm thick, honna-rubber beading for shutters beading, honna-jungle wood runners and planks, honna-cleat angles, honna-casurina poles 100 - 150 mm, honna-boulders, honna-bond stone 20 x 20 x 45 cm, honna-aluminium window frame section 1.20 mm thick, honna-alluminium tower bolt - 20 cm, honna-alluminium handles - 15 mm, honna-binding wire, honna-pvc edge beading, honna-add providing and removing scaffolding at 3% on labour, honna-add hom of welding and grinding machine 2% on material, honna-add brush, putty, sand paper at 2% on cost of paint, honna-add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, honna-add brush, putty, glue at 5% on cost of paint, honna-painter class i, honna-fitter class i, honna-fabricator, honna-whitening, honna-suspensionshaft, honna-side guides, honna- (ready mix red lead paint), honna-ms side shed clamps, honna-ms sheet 20 gauge, honna-ms handles, honna-locking arrangments, honne-high tension coil, honna-chrominum plated screws, honna-center pully, honne-bottom lock nail, honna-5.50 mm thick plain glass, honna-18 gauge 75 mm ms laths of 2.8 m length, honna-water proofing cement paint, honna-dry distemper, honna-ball bearing for rolling shutters

CTN :43188173

31 Dec, 2025 13.36 Lacs

Multi City - Karnataka

Tender For supply of martials new gp building shettahalli grampanchayt under mgnrega scheme - electrification items sthl gp, electrification items sthl gp, mathi/nandi wood planks for panels 25 mm thick sthl gp, bib cock 20mm nominal bore sthl gp, transportation loading and unloading at1percent on material sthl gp, tools and plants at2percent on material sthl gp, hom of cutting and grinding machine1 sthl gp, hom of welding and grinding machine sthl gp, mechanic class ii/mechanic hmp grade i/eme grade sthl gp, anticorrosive bitumastic paint sthl gp, ms square rod 12x12 sthl gp, ms square rod 20 mm x20mm vertical sthl gp, dia 50 mm ms hollow pipe b class 14 gauge sthl gp, polythylene pipes high density 25mm external dia sthl gp, polythylene pipes high density 32mm external dia sthl gp, add 5percent for fittings and wastage charges sthl gp, add cement sand and grit 1percent on material sthl gp, handling loading and unloading 3percent on material sthl gp, labour charges for lifting and placing in position and making connection at 7percent on material sthl gp, polyenthylene water storage tank of specified capacity l sthl gp, add white lead paint, gasket, cement, sand for making good the wall and floor at 2percent on material sthl gp, licenced plumber with tools sthl gp, lead or pvc connection pipe 32mm dia (for wash basin) sthl gp, c.i. / m.s. brackets for flushing cistern sthl gp, brass stop cock sthl gp, cp brass waste 32 mm of standard pattern sthl gp, cp brass chain with plug sthl gp, copper plated brass piller tap 15mm sthl gp, white vitreous china clay flat back wash basin size 630x450mm sthl gp, pvc pipe of 4kg cum 110 mm sthl gp, add brush, putty, sand paper, roller at 5percent on cost of paint sthl gp, plastic emulsion paint sthl gp, lime sthl gp, add brush, putty, sand paper at 2percent on cost of paint sthl gp, water proofing cement paint sthl gp, white cement sthl gp, ceramic tiles of size 30 x 30 cms sthl gp, vitrified tiles 600x600 mm sthl gp, binding wire sthl gp, tmt bars fe 500 sthl gp, add brush at 1percent on cost of paint sthl gp, enamel metal paint sthl gp, add providing and removing scaffolding at 3percent on labour sthl gp, painter class i sthl gp, add wire brush, fine steel wool, putty, sand paper, at 3percent on cost of paint sthl gp, ready mix primer paint (ready mix red lead paint) sthl gp, add hom of welding and grinding machine at 4percent on material sthl gp, welder grade i sthl gp, fitter class i sthl gp, ms flat sthl gp, m.s rods sthl gp, add hom of welding and grinding machine at 2percent on material sthl gp, fabricator sthl gp, add 15percent wastage for glass sthl gp, plain glass 5.50 mm thick sthl gp, chrominum plated screws sthl gp, cleat angles sthl gp, alluminium handles - 15 mm sthl gp, alluminium tower bolt - 20 cm sthl gp, pvc beading sthl gp, rubber beading for shutters beading sthl gp, nylon rollers sthl gp, aluminium window frame section 1.20 mm thick sthl gp, hom of machinaries for planing sthl gp, add cutting and other wastage 5percent sthl gp, honnewood planks for panels 20 mm thick sthl gp, honne wood sthl gp, add handling , loading and unloading at 1percent on material sthl gp, burnt bricks class 35 (non modular) sthl gp, add watering charges at 1 percent on labour sthl gp, stone chistler class ii sthl gp, mason class i (with tools) sthl gp, mixer (concrete small used in culvert) sthl gp, boulders sthl gp, bond stone 20 x 20 x 45 cm sthl gp, size stone 20 x 20 x 25 cms sthl gp, hom of vibrator 0.71 days sthl gp, plasticizer / super plasticizer sthl gp, casurina poles 100 - 150 mm sthl gp, add handling , loading and unloading at 2percent on material sthl gp, casurina poles 75 - 100 mm dia sthl gp, jungle wood runners and planks sthl gp, silver oak or equivalent planks 38 mm thick sthl gp, mason class ii (with tools) sthl gp, add watering charges at 1 percent on material sthl gp, mixer (concrete) - 1 cum capacity sthl gp, portland cement sthl gp, coarse sand (zone iii) sthl gp, broken stone aggre

corporations/Associations/Others

CTN :42485358

24 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

24 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

Central Government/Public Sector

CTN :43194792

06 Jan, 2026 NA

Moradabad - Uttar Pradesh

Tender For supplying & loading, leading, unloading & stacking of 90000 cum machine crushed stone ballast of 65 mm gauge size as per railway specification including loading of ballast into rly. wagons / hoppers at hafizpur.

CTN :43194841

05 Jan, 2026 NA

Howrah - West Bengal

Tender For transportation of all sorts of p. way materials such as rails, switch, crossing etc. requiringuse of tailor and also erc, bolts and nuts, bearing plates and other p. way materials andtrack machine spare parts like conveyor belts, cutter, chains, wear plates, filters, valves,cylinders, batteries, pumps, motors etc requiring use of truck including mechanical loading,unloading and stacking, segregating etc with all lead, lift, crossing of multiple tracks within a lead of 30m as per instruction of engineer at site anywhere in hwh division/other division under sr. divisional engineer [co-ordination]/howrah.

Corporations/Associations/Others

CTN :43147961

23 Dec, 2025 9.68 Lacs

Multi City - Karnataka

Tender For tender calling for providing unskilled labour for maintaining trommel, bailing machine, segregation, loading and unloading for legacy waste management of kaup tmc

CTN :43086738

26 Dec, 2025 6.38 Lacs

Multi City - Karnataka

Tender For supplying materials for construction of nrlm shed av/58151 at sangankallu village - sn-painter class i, sn-add providing and removing scaffolding at 3percentage on labour, sn-white cement based putty at 2sqm kg at rs. 1050 per kgs, sn-add brush, putty, sand paper, roller at 5percentage on cost of paint, sn-add handling , loading and unloading at 1percentage on material, sn-add watering charges at 1 percentage on material, sn-plastic emulsion paint , sn-vitrified tiles 10 mm thick 600 x 600 mm, sn-adhesive for tiles, sn-grout for vitrified tiles, sn-spacers for vitrified tiles, sn-mason class i (with tools), sn-honnewood planks for panels 20 mm thick, sn-add cutting and other wastage 5precentage , sn-carpenter assistant, sn-add handling , loading and unloading at 2percentage on material, sn-mathi/nandi wood scantling, sn-mathi/nandi wood planks for panels 25 mm thick, sn-aluminium window frame section 1.20 mm thick, sn-nylon rollers, sn-rubber beading for shutters beading, sn-pvc beading, sn-alluminium tower bolt - 20 cm, sn-alluminium handles - 15 mm, sn-cleat angles, sn-chrominum plated screws, sn-5.50 mm thick plain glass, sn-add 15percentage wastage for glass, sn-fabricator, sn-add hom of welding and grinding machine at 2precentage on material, sn-portland cement, sn-coarse sand (zone iii), sn-mixer (concrete small used in culvert), sn-tmt bars fe 500, sn-binding wire, sn-silver oak or equivalent planks 38 mm thick, sn-casurina poles 100 - 150 mm, sn-casurina poles 75 - 100 mm dia, sn-broken stone aggregate 12 mm to 10 mm size, sn-plasticizer / super plasticizer, sn-mixer (concrete) - 1 cum capacity, sn-jungle wood runners and planks, sn-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, sn-broken stone aggregate 20 mm size, sn-hom of vibrator 0.71 days

Loading Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Corporations/Associations/Others