Latest loading transportation Tenders | Government loading transportation Tenders

State Government

CTN :44911814

13 May, 2026 22.20 Crore

Sarni - Madhya Pradesh

Tender For corrigendum : transportation with loading of coal from urdhan ocm of pench area mine of m/s wcl to stps, sarni by contractor in completely covered and sealed tippers/ trucks and unloading the coal in coal yard at mppgcl, sarni.

Central Government/Public Sector

CTN :45123843

15 May, 2026 92.0 Thousand

Kanyakumari - Tamil Nadu

Tender For packing, loading, transportation and unloading of house hold articles

State Government

CTN :45080447

11 May, 2026 14.71 Lacs

Multi City - Telangana

Tender For tggenco-ytps(5x800 mw)- be-iv - loading, transportation , unloading , cleaning of mill rejects coal, debris and coal from feeders floor area, mill pits, mill surrounding area at zero meter and dumping at the designated area earmarked in the coal plant on as and when required basis from 01.04.2026 to 31.03.2027 to be reckoned from actual date of commencement to 31.03.2027

CTN :45018875

15 May, 2026 107

Bengaluru - Karnataka

Tender For beedi deepa nirvahane - alugcable4cx35, aluminium cable 25 sq mm, fuse carrier 200a, high must 12.5 mtr, top 100mm and bottom 310 mm dia galavnized in single hotdip as per bsen iso 1461/astm a123, the mast shall be created on existing rcc footing,with 6nos 150w led flood light, high mast lighting 8meter tower with ladder and led flood lighting system, labour charges for highmast service including labour,crane ,transportation and other expenses, highmast timer, highmast light 9 meter full set with 150w flood light 6 nos, highmast light 9 meter full set with 150w flood light 4nos, highmast lights 9meter full set with 200w led flood light 4nos, high mast 12/12.5 mtrs, light fixing charge/gptpzp6, pipe clamp set/gptpzp6, meter box/gptpzp6, high mast light 10m height, alluminium 20sq cabel, led bulb 40w, led street light 50w, led street light 150w, led street light 100 wattage, led flood light 300w, led flood light 250w, led flood light 200w, led flood light 150w, copper cabel 10 sq mm, copper cabel 6 sq mm, copper cabel 1 sq mm, copper wire 16 sq mm, labour charges, tpn-63a, led serial lights, cable tie 12inch, cable tie 10inch, ceiling fan normal, electrical porcelain fuse-32a, led street light 120watt , led 60watt bulbs, led 50watt bulbs, led 30watt bulbs, led 20watt bulbs , cable tie 8inch, contractor with no protection 40a, aluminium cable 16sqmm, waterproof tape, single phase meter box, sodium light 100watt choke, flood light 150/200/250watt, led street light 200w, dp switch 63amp, dp switch 32amp, aluminium cable 6sqmm, aluminium cable 4sqmm, aluminium cable 2.5sqmm, aluminium cable 10sqmm, aluminium cable 2c6sqmm flat , bulb doom 50watt, three phase meter box, test lamp kit, ms fittings with clamps 1p5 inch, screwdriver set big size, enclosure box-mcb , mcb 2pole 32a, mcb single pole 32a, led street l 50w, led street l 150w, led street l 100w, led electronic open choke-150w, insulation tape w, auto on and off timer, change over 20amps, bed switch-b, high mast led bulb 200 watt (street light items), high mast led bulb 150 watt (street light items), high mast led bulb 100 watt (street light items), led bulb 50 watt (street light items), led bulb 32 watt (street light items), led bulb 25 watt (street light items), led bulb 23 watt (street light items), led bulb 20 watt (street light items), street light shade (street light items), led street light set 50 watt (street light items), led street light set 40 watt (street light items), led street light set 25 watt (street light items), street light bend pipe and clamp (street light items), tester (street light items), screw driver (street light items), cutting player (street light items), gang box 3 way (street light items), gang box 2 way (street light items), gang box 1 way (street light items), tp switch (street light items), dp switch (street light items), switch 16 amps (street light items), switch 6 amps (street light items), mcb 4 pole 63 amps (street light items), mcb 4 pole 32 amps (street light items), mcb 3 pole 63 amps (street light items), mcb 3 pole 32 amps (street light items), mcb 32 amps (street light items), mcb 25 amps (street light items), mcb 10 amps (street light items), mcb 6 amps (street light items), copper wire 4.0 sq mm (street light items), copper wire 2.5 sq mm (street light items), copper wire 2.0 sq mm (street light items), copper wire 1.5 sq mm (street light items), cg holder (street light items)

Central Government/Public Sector

CTN :45106004

16 May, 2026 34.75 Lacs

Dhanbad - Jharkhand

Tender For felling of 1018 trees stacking of timber and firewood produced their loading transportation and unloading at jsfdc rajganj and their transplantation of 164 trees under govindpur area

Central Government/Public Sector

CTN :45091837

01 Jun, 2026 NA

Delhi - Delhi

Tender For supply, transportation ,installation, and commissioning of 04-channel voice logger as per rdso/spn/tc/38-2002 ver2 or latest to record for vhf/other 2 wire communication , consisting of : 4 channel vdrpu, 13.5v/15 amp smps, 12v/65ah smf battery, 6u wall mount rack. all materials required for installation and commissioning to be arranged by contractor. (includes power cable and other inter connecting cables). note: user manual to be along with equipment. necessary training related to maintenance and operation to be imparted to all concerned railway staff. all materials required for installation and commissioning to be arranged by contractor (includes power cable and other inter connecting cables).as per attached specification and annexure [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44795855

08 May, 2026 5.00 Lacs

Bandhavgarh - Madhya Pradesh

Tender For corrigendum : supply of hard, durable quarry stones for dry hand-packed stone pitching of ponds, roughly rectangular/flat in shape, average thickness 100mm, size approximately 200-400 mm, free from cracks and weathered surfaces, including loading, transportation a

CTN :45086304

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/30/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) er 72029562906 bobrm1 (wm) 2) er 72029661692 bobrnm1 (wm) 3) nr 75039260183 bobsnm1 (nlb) 4) se 75079218106 bobsnm1 (nlb) 5) cr 75019260158 bobsnm1 (nlb) 6) se 10079617986 boxnm1 (nlb) nb: (1) : i) wagons are to be sold with 04 nos. wm trolleys against srl. no. 01 and 02. ii) wagons are to be sold without 08 nos. nlb trolleys against srl. no. 03 to 06. ii) wagons srl no 01 to 06 to be sold without 24 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086305

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/29/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260648 bobsnm1 (nlb) 2) nr 75039160568 bobsnm1 (nlb) 3) cr 75019260103 bobsnm1 (nlb) 4) se 75079215020 bobsnm1 (nlb) 5) er 75029060830 bobsnm1 (nlb) 6) special repair 75069260054 bobsnm1 (nlb) 7) nr 75039188050 bobsnm1 (nlb) 8) cr 75019208051 bobsnm1 (nlb) 9) nr 75039160810 bobsnm1 (nlb) 10) nr 75039160520 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against special repairl. no. 01 to 10. ii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086306

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/28/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260754 bobsnm1 (nlb) 2) nr 75039187923 bobsnm1 (nlb) 3) sc 75099160133 bobsnm1 (nlb) 4) cr 75019208020 bobsnm1 (nlb) 5) cr 75019260097 bobsnm1 (nlb) 6) ne 75049260012 bobsnm1 (nlb) 7) nr 75039160537 bobsnm1 (nlb) 8) se 75079215273 bobsnm1 (nlb) 9) nr 75039187893 bobsnm1 (nlb) 10) se 75079260532 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Loading Transportation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government