Latest loading work Tenders | Government loading work Tenders

State Government

CTN :40064334

30 Apr, 2025 49.98 Lacs

Ukai - Gujarat

Tender For providing of handling and transport on lumpsum basis - work of loading, transportation and unloading of stacked coal unloaded wt 4932

State Government

CTN :40044754

23 Apr, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

CTN :40055586

28 Apr, 2025 NA

Rohtak - Haryana

Tender For earth work , mechanical transport including loading etc.

CTN :40060527

19 Aug, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For construction of substructure of important bridge no. 50 (14x61.0 m) with double d type well foundation for double line with rdso 25 t axel loading standard over river gandak between paniyahwa - valmikinagar station in connection with doubling work between gorakhpur cantt-valmikinagar section of north eastern railway

CTN :40065634

09 May, 2025 1.38 Crore

Asansol - West Bengal

Tender For providing of custom bid for services - on train welding repairing work of unloadable boxn variant wagons at various coal loading unloading sidings under jurisdiction of sse c and w asansol and sse c and w andal for a period of 03 three years

CTN :40058800

30 Apr, 2025 NA

Banaskantha - Gujarat

Tender For rate contract for motor loading and unloading work , jcb hiring , water tanker , garbage collection , etc.

CTN :40058376

23 May, 2025 NA

Kanchrapara - West Bengal

Tender For supply, installation and commissioning of pit type dynodrive test bench (including all mech anical & civil work) at pit line for testing of load sharing/ parallel operation of 02 nos. of 25 kw alternators i n coach with erru, having motor outside pit as per rdso specification no. rdso/pe/spec/ac/0081-2007 ( rev-0) with amendment no. 1, without regenerative loading. [ warranty period: 30 months after the date of delivery ]

CTN :40023747

23 Apr, 2025 6.13 Lacs

Multi City - Karnataka

Tender For supply of materials for the constrcution of sanjivini shed in kallenahalli gp, ajjampura taluk, chikkamagaluru work under mgnregs scheme - broken stone aggregate 40 mm size(kall), broken stone aggregate 20 mm size(kall), broken stone aggregate 12 mm to 10 mm size(kall), coarse sand (zone iii)(kall), portland cement(kall), mixer (concrete) - 1 cum capacity(kall), add watering charges at 1 % on material(kall), formwork, centering & scaffolding for columns & piers(kall), plasticizer / super plasticizer(kall), hom of vibrator 0.71 days(kall), size stone 20 x 20 x 25 cms(kall), bond stone 20 x 20 x 45 cm(kall), boulders(kall), mixer (concrete small used in culvert)(kall), jungle wood runners and planks(kall), silver oak or equivalent planks 38 mm thick(kall), casurina poles 100 - 150 mm(kall), add handling , loading and unloading at 2% on material(kall), add watering charges at 1 % on labour(kall), burnt bricks class 35 (non modular)(kall), add handling , loading and unloading at 1% on material(kall), solid concrete block (40x15x20 cms)- 5.00 n/sqmm(kall), mason class i (with tools)(kall), casurina poles 75 - 100 mm dia(kall), tmt bars fe 500(kall), binding wire(kall), mathi/nandi wood planks for panels 25 mm thick(kall), add cutting and other wastage 5%(kall), hom of machinaries for planing(kall), unit cost as per the specification(kall), honne wood(kall), honnewood planks for panels 20 mm thick(kall), t section(kall), mullion section(kall), ms clamps(kall), handles(kall), hinges 5inch heavy duty(kall), stays(kall), tw beading for fixing glass(kall), reeded glass 2 mm thick(kall), z section(kall), fitter class i(kall), welder grade i(kall), add(kall), ready mix primer paint (ready mix red lead paint)(kall), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint(kall), painter class i(kall), add providing and removing scaffolding at 3% on labour(kall), lime(kall), dry distemper(kall), whitening(kall), add brush, putty, glue at 5% on cost of paint(kall), distemper primer(kall), add brush, putty at 5% on cost of distemper primer(kall), water proofing cement paint(kall), add brush, putty, sand paper at 2% on cost of paint(kall), mason class ii (with tools)(kall), enamel paint(kall), add brush, putty, sand paper at 3% on cost of paint(kall), vitrified tiles 600x600 mm(kall), ceramic tiles 30 x 30 cms(kall), white cement(kall), glazed tiles 300x450(kall), border tiles 30 x 10 cms(kall), add white cement for pointing at 2% on material(kall), indian type water closet of size 580 mm of specified make with footrests(kall), s or p trap 100mm(kall), add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material(kall), white vitreous china clay flat back wash basin size 550x400mm(kall), copper plated brass piller tap 15mm(kall), cp brass chain with plug(kall), cp brass waste 32 mm of standard pattern(kall), brass stop cock(kall), c.i. / m.s. brackets for flushing cistern(kall), lead or pvc connection pipe 32mm dia (for wash basin)(kall), licenced plumber with tools(kall), polyenthylene water storage tank of specified capacity l(kall), labour charges for lifting and placing in position and making connection at 7% on material(kall), handling loading and unloading 3% on material(kall), pvc pipe of 10kg/cum,110 mm(kall), pvc pipe of 6kg/cum,63 mm(kall), pvc pipe of 4kg/cum,75 mm(kall), add cement sand and grit 1% on material(kall), add 5% for fittings and wastage charges(kall), polythylene pipes high density 32mm external dia(kall), bib cock 20mm nominal bore(kall), cost of 6.5mm m.s. coil(kall), fabrication charges.(kall), transportation charges of materials beyond 5 km at 10%(kall), labour charges for handing errection of rcc rings etc. at 5%(kall)

CTN :39981642

30 Apr, 2025 NA

Bulandshahr - Uttar Pradesh

Tender For ??? ?????? ??????? ?????? ??????? ?????? ??? ??????? ???? ?? ???? ???? ???? ?? ??????? ????? ??? ?? ?? ?? ???????/??????/???????? ?? ????? ????- supply of straw for fodder of bovine animals in the gaushala run by nagar palika anupshahr on monthly basis including delivery/loading/unloading work

CTN :40032569

22 Apr, 2025 8.00 Lacs

Multi City - Uttar Pradesh

Tender For daivya apda work under edd fatehabad - carriage of following from 132 kv taj agra to 33/11 kv substations through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70kms.) 8.5/9/11 mtr/13mtr.. long pcc/stp poles., carriage of following from 132 kv taj agra to 33/11 kv substations through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.) 11 kv x-arms, weasal conductor, g.i wire,disc insulators, pin insulators, clamps and other required line material, if any., carriage of following from realted 33/11 kv substations to site of work i.e. pit point through the kacha and pakka road by using manual labour or tractor/hydra as per site requirment including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-10 kms.) a) 8.5/9/11 mtr/13mtr.. long pcc/stp poles., carriage of following from realted 33/11 kv substations to site of work i.e. pit point through the kacha and pakka road by using manual labour or tractor/hydra as per site requirment including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-10 kms.)d) 11 kv x-arms, weasal conductor, g.i wire,disc insulators, pin insulators, clamps and other required line material, if any., cutting of kharanja/mettalic road/concrete portion while digging pit for erection of pcc/stp poles, stays rod and giving the exact shape after exicution work as per direction of supervising engineer. it includes the cost of labour, t & p, carrier etc reauired for proper completion of work., replacement & erection of damaged poles of lt lines by digging of pits and dismantling of all 11kv/lt accessories from the existing / damaged pole and erection of single new pole including fitting all accessories., replacement of damaged poles ht lines by digging of pits and dismantling of all 11kvkv accessories from the existing / damaged pole and erection of single new pole including fitting of all accessories., replacement of damaged poles 33 kv lines by digging of pits and dismantling of all 11kv/33 kv accessories from the existing / damaged pole and erection of single new pole including fitting of all accessories., grauting of new erected 8.5 mtr/ 9 mtr/11mtr/13mtr long pcc/stp poles, recostructions of damaged double pole (saction) on 11 kv lines by dismantling of t/f, opening of all accessories of lt s/s then removing damaged poles by digging earth pit(s), erecting new poles then fixing of of lt s/s accessories such as dropper channel, t/f base, disc insulators with fitting and other 11 kv accessories etc., required for proper completion of work., replacement of damaged double pole structure on 33 kv lines dismantling of t/f, opening of all accessories of lt s/s then removing damaged poles by digging earth pit(s), erecting new poles then fixing of of lt s/s accessories such as dropper channel, t/f base, disc insulators with fitting and other 11/33 kv accessories etc., required for proper completion of work., erection of stays its tightning, binding, nozelling etc. of stay wire with stay and stay clamp of pole as per requirement of work at site., re- sagging and stringing of existing conductor in 11kv/ /lt line as per direction of supervising engineer including the cost of arrangement of labour,t&p, carrier etc. required for proper completion of work a) acsr weasel conductor., b)acsr dog conductor., c) 50/95/120 sqmm abc., removal of following damaged conductor of existing damaged line including opeing of jumpers and line accessories etc making bundle, stacking at safe place and its relaying after completion of pole work, including fixing of accessories a) acs

Loading Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government