Latest loading arm Tenders | Government loading arm Tenders

Central Government/Public Sector

CTN :45430510

09 Jul, 2026 NA

Multi City - Multi State

Tender For corrigendum : spn/b957-500-ll-mr-4090/181 loading arms (rail/road) for bina petchem and refinery expansion project (bprep) of m/s bharat petroleum corporation limited (bpcl)

CTN :45712307

13 Jul, 2026 NA

Ahmednagar - Maharashtra

Tender For providing of custom bid for services - supply, installation & commissioning of bottom loading arms with rack monitor at tlf gantry at bpcl akolner depot

CTN :45672875

13 Jul, 2026 NA

Akola - Maharashtra

Tender For tank truck bottom loading arm , rack monitor

Central Government/Public Sector

CTN :45681767

24 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of carline for lhb gs amrit bharat coach. note:-(1)special condition as per annexure-abc dy cple-iii letter no. rcf/hsq/plg/mpsh/510003 dated 27/05/2024., as per drawing: mp24clwwgs version 1, packing instruction: pi185 version 02 carline assly:- the supplier shall pack the one c/set (segments) of carlines in a suitably designed robust returnable mettalic cage/ structure in such a way that carlines shall not get entangled, damaged, twisted , dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable enviroment friendly cushioning material is to be placed between two segmemts. transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate one tonne material load in static & moving condition of one coach set of carline. the bottom part of this packing cage//pallet should be such that curvature profile of bottom carline should match with the profileof packing cage and it can accomodate fork lifter arms for lifting & transportation. itshould have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's dentification/colour mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description , drg no./spec., qty., firm's name & address and despatch dateetc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45631986

01 Jul, 2026 18.24 Lacs

Kolkata - West Bengal

Tender For supply of spares for lpg loading unloading arms : : - swivel joint , swivel repair kit , snap ring , linear spring assembly , 2 inch pipe bracket- for linear spring , valve nts-lt-2 inch

CTN :45635386

04 Jul, 2026 NA

Tiruvallur - Tamil Nadu

Tender For providing of custom bid for services - cpcls26229 - engaging agency for supply of top loading facilities for bowser incl flow meter, loading arm and related instruments and pipe fittings for coco mathur

Central Government/Public Sector

CTN :45550383

10 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of carline for lhb bangladesh non ac chair car coaches note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25wecbgcarline version 2, packing instruction: pi185 version 02 carline assly:- the supplier shall pack theone c/set (segments) of carlines in a suitably designed robust returnable mettalic cage/ structure in such a way that carlines shall not get entangled, damaged, twisted , dented during transportation, storage, handling and lifting and to avoid scratches onouter surface suitable enviroment friendly cushioning material is to be placed between two segmemts. transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate one tonne material load in static & moving condition of one coach set of carline. the bottom part of this packing cage//pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accomodate fork lifter arms for lifting & transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it shouldhave firm's dentification/colour mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description , drg no./spec., qty., firm's name & address and despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45407106

01 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of carline for memu dmc 3-phase coaches with high rise panto & tcas facility, as per drawing: mp26cardmc version 0, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to beplaced between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along withset of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

CTN :45415617

08 Jun, 2026 40.00 Lacs

Anantnag - Jammu And Kashmir

Tender For rate contract for supply of materials and execution of various maintenance works, as and when required during emergency in electric division anantnag kpdcl for the fy year 2026-27 - supply, erection, testing & commissioning of s.t pole 11mtr. long sp-56 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 11mtr. long sp-56 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 9mtr long sp-33 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 9mtr long sp-33 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 8mtr long sp-15 with base plate & cap for lt. strictly as per rec standards, erection, testing & commissioning of s.t pole 8mtr long sp-15 including its carriage from divisisonal store to site, providing of hydraulic crane on hire basis for loading/unloading of dts of different capacities inclouding fuel and operator faling in the juridection of ed anantnag, erection, testing & commissioning of pcc pole 8mtr long including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor including its carriage from divisisonal store to site, providing & fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 25.2 kg each -1 no including nuts & bolts, fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 18.63 kg each -1 no including nuts & bolts, providing & fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame- 1 nos @18.63 kg each 9 long including nuts & bolts, fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame-, providing ,fixing, of ismc 75x40x6mm x-arm 5 long, fixing, of ismc 75x40x6mm x-arm 5 long-, providing ,fixing, of ms angle iron braces 50x50x6mm-4.5 ft long,, fixing, of ms angle iron braces 50x50x6mm-4.5 ft long, providing and fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, supply,fixing, testing & commissioning of 11kv link set (polymer) station type as per is standards, fixing, testing & commissioning of 11kv link set station type (polymer/porcelain )as per is standards, supply,fixing, testing & commissioning of 11kv link set heavy duty as per is standards, fixing, testing & commissioning of 11kv link set heavy duty (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv do fuse set (polymer )as per is standards, fixing, testing & commissioning of 11kv do fuse set (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv la set (polymer )as per is standards, fixing, testing & commissioning of 11kv la set (polymer/porcelain ) as per is standards, providing and fixing of lt fuse set as approved by kpdcl., supply,fixing, testing & commissioning of 11kv disc set (polymer) 45 kn complete set, supply,fixing, testing & commissioning of 11kv disc set (porcelain) 45 kn complete set, fixing, testing & commissioning of 11kv disc set (polymer/po

CTN :45408458

17 Jun, 2026 NA

Delhi - Delhi

Tender For supply of furniture items in delhi vidhan sabha delhi 110054 b b - three seater sofa , pondicheery type table , console table , visitory chair , curved oval shaped conference table providing and placing in position 3-seater sofa made of well- seasoned sheesham wood frame of required thickness (25 mm / 38 mm / 50 mm as specified), and of size (l=2100mm, b=865mm and d=920mm) including arms, back, legs, etc., with proper joinery (mortise and tenon joints), complete.the seat and back to be supported with zig-zag springs / elastic webbing, and cushioned with 32 density feather foam covered with fiber layer. upholstery to be done using approved quality fabric/cotton material with neat stitching. the item includes use of ykk zippers, jute/markin lining, cotton/elastic belts, buffers, and all necessary fittings and accessories. exposed wooden surfaces to be finished with approved polish (melamine/pu) of required shade. complete in all respects including cost of materials, labour, carriage, loading/unloading, and installation as per direction of engineer-in-charge., providing and placing in position end table (pondicherry type) of approved design and size{50cm(l) x 40cm(w) x 60cm(h)}, made of well-seasoned sheesham wood (dalbergia sissoo) / solid mango wood (as specified), kiln- seasoned free from defects, with top and legs made of solid wood sections of 25 mm / 38 mm / 50 mm thickness, properly jointed using mortise & tenon / dowel joints, fixed with synthetic resin adhesive and screws, including use of l- clips/corner brackets for structural stability, all hardware of non-corrosive material, bottom provided with felt buffers/pvc stoppers to prevent floor damage, wood treated * /bid number : gem/2026/b/7589388 + /dated: 02-06-2026 ' ' / bid document 1 / 12

Loading Arm Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector