Latest loading machine Tenders | Government loading machine Tenders

State Government

CTN :45074869

11 Jun, 2026 10.00 Lacs

Degloor - Maharashtra

Tender For corrigendum : e-tender for the work contract for transportation, loading-unloading of equipment s and all type of material at various site under all sub division under degloor division & major store nanded, anywhere in maharashtra as an when required under the jurisdiction of o&m degloor division on full turnkey basis as when required.

State Government

CTN :45074865

11 Jun, 2026 10.00 Lacs

Nanded - Maharashtra

Tender For corrigendum : e-tender for the work contract for transportation, loading-unloading of failed & repair transformers & other equipment s from repairer agencies, major store nanded to filter unit under degloor division, anywhere in maharashtra as an when required under the jurisdiction of o&m degloor division on full turnkey basis.

State Government

CTN :45287256

15 Jun, 2026 15.00 Lacs

Mumbai - Maharashtra

Tender For corrigendum : contract for the work of material handling i.e. loading/unloading/stacking and transportation of material/equipment s weighing from0 to 2mt and 2mtto 9mt per vehicle within the jurisdiction of mumbai metropolitan region for airoli major store, airoli/all sdns of vashi dn/vashi dn store and from vashi dn store/airoli major store to all over maharashtra and vice versa

corporations/Associations/Others

CTN :45261086

09 Jun, 2026 NA

Bacheli - Chhattisgarh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - amc of hydraulic systems, and reconditioning and overhauling of the hydraulic luffing cylinder of mobile equipment in loading plant, d-5, 10 & 11a, biom bacheli complex

Central Government/Public Sector

CTN :45474548

16 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - psc 60 kgs sleeper remarks :-1. kutcha approach road is available nearby the lot. 2. delivery will be made on number basis only. 3. quantity is physically available. breaking of sleepers is not allowed. 4. lot no. has been painted on the lot. 5. the stockholder is responsible for any alteration, addition or deletion in the lot after joint inspection. 6. four nos. inserts attached with psc sleeper will be delivered. 7. fresh receipts of released psc sleepers are continuously going on near the lot. as such, the quantity available will be more than the lot proposed. delivery will be done as per quantity mentioned in jvr, ss-11 and d.o only. 8. the purchaser will be responsible for the safety of his labours and other staff in railway premises. 09. the purchaser shall be responsible for any loss or damage to any other railway property/facility equipment whether due to his negligence or otherwise. 10. purchaser should personally visit the site and see the lot in regard to loading point. no claim will be entertained after sale of lot. 11. lot is ok for sale with above observations. stock holder :- sse/p.way/ tuh

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

corporations/Associations/Others

CTN :45348163

09 Jun, 2026 NA

Bacheli - Chhattisgarh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - restoration of track-line of mobile equipment of fine siding dep.05 at loading plant dep.05, 10 &11a, biombacheli complex

State Government

CTN :45444485

19 Jun, 2026 NA

Karur - Tamil Nadu

Tender For loading of reels / bundles / copier boxes/ note book and providing equipment operator for unloading of reel, shifting work at mayanur godown - loading of reels / bundles / copier boxes/ note book and providing equipment operator for unloading of reel, shifting work at mayanur godown (the rate to be quoted rate without gst), loading of reels, sheet bundles, copier boxes and note books by engaging required contract loadmen, equipment operators in all the three shifts at mayanur godown as per the instruction of officer-in-charge-8338000087, shifting of paper reels/ sheet bundles/copier boxes at mayanur godown as per the instruction of the officer-in-charge-8338000088, to provide equipment operator for unloading of reels from lorry using tnpl forklifts at mayanur godown.-8338000089

State Government

CTN :45446346

12 Jun, 2026 14.99 Lacs

Multi City - Telangana

Tender For loading, unloading, and transportation of h2 gas cylinders from stores to unit gas rooms of units 3 and 4,scheduled greasing of ht and lt motors and associated equipment of electrical, boiler, and turbine divisions, topping up of lubricating oils to various plant equipment of units 3 and 4, and providing 1 no tractor on hire basis at stage ii,ytps for the period from the date of commencement of work to 31.03.2027

CTN :45435036

10 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of equipment items > - parallelogram law apparatusparallelogram law of forces apparatus fitted with stand, travelling microscopebranded travelling microscope 0-200 mm horizontal and 0-150 mm vertical measurement (two separate experiment), helical spring apparatusstructure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests. springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long. measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom. pointer: a fine pointer attached to the bottom of the spring moves along the scale. accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading., boyle s law apparatusthe apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale. quill tube specifications: length: approximately 50 cm. bore diameter: uniform bore, roughly 1 mm to 2 mm. construction: glass tube with one end sealed. trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., torsion pendulumtorsional pendulum metallic disc, symmetrical masses and pendulum stand, steel wire, compound bar pendulumone meter long iron strip well painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand with stop clock, viscosity apparatusstokes apparatus with metre scale attached and long cylindrical glass jar, glass beads small size (1 box), screw gauge (0-15 mm), sonometer apparatussonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight -500 gm each to a total of 3 kg. brass wire (5 m), metre bridgetype: 1 m length, with uniform wire (resistance wire) material: constantan or manganin (low temperature coefficient) scale: 0 100 cm, engraved or printedbase: wooden or metal, rigid, non-conductive supportjoints / terminals: brass or copper, fixed for connections2. galvanometertype: analog, moving coil or digital (for null detection) range: sensitive to detect micro-ampere currentsinternal resistance: high, typically ~100 or as specified5. cells / power supplytype: leclanch cells (1.5 v each) or dc power supplynumber: 2 4 cells in series (or supply ~3 6 v), ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, joule calorimeter apparatuscopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, potentiometer apparatusit features a 1-meter to 10-meter constantan/ manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. it includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements., solar cell kitthe apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, deflection magnetometer apparatusdeflection magnetometer apparatus with compass box and two short bar magnets, ic regulated battery eliminatoric regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometermoving coil type, 30-0-30 scale, unbranded with bhel specification-sensitivity 0.143mm/v, ammeterdc (0 -2 amp), voltmeterdc voltmeter; range 0 10 v, analog, decade resistance boxresistance box 12 month warranty (dial type) - mangani

Loading Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors