Latest locating plate Tenders | Government locating plate Tenders

Central Government And Public Sector

CTN :44915511

11 May, 2026 2.74 Lacs

Ernakulam - Kerala

Tender For supply of sitc of wall mounted type microprocessor based afd control panel , supplying, installation, testing and commissioning of 20w, 4 feet led batten tube , sf led type solar street light fitting , replacing the faulty capacitor , supplying and fixing of wall fan , supplying and fixing 32 a dp switch fuse unit , sf 16 32a rewirable type fuse unit , s f 16 32a neutral link , wiring for light point ,fan point, exhaust fan point, call bell point group a , wiring for circuit, submain wiring 2 x 1.5 sq.mm 1 x 1.5 sq.mm earth wire , wiring for circuit, submain wiring 2 x 2.5 sq.mm 1 x 2.5 sq.mm earth wire , supplying and fixing following way , single pole and neutral , sheet steel, mcb distribution board 8 way, double door , supply and fixing following 5a to 32a rating , 240v, 415v, 10ka, c curve miniature circuit breaker single pole , supplying and fixing single pole blanking plate , supplying and fixing following rating, double pole, 240 volts, isolator 40 amps , supplying and fixing following rating , double pole single phase and neutral ,240 v ,residual current circuit breaker rccb , supplying and fixing call bell buzzer , supplying and fixing pvc batten angle holder , supply and fixing following modular switch socket 5 6 a switch , supply and fixing following modular switch socket 3 pin 5 6 a socket outlet , supply and fixing following modular switch socket 15 16 amp switch , supply and fixing following modular switch socket 6 pin 15 16 amp socket outlet , supplying and fixing following size modules, gi box 4 module 125mmx75mm , supplying and fixing stepped type electronic fan regulator , providing and fixing 4.00 mm dia copper wire on surface

CTN :44611933

17 Apr, 2026 NA

Kamrup - Assam

Tender For bid to ras bid to ras bid to ras supply of ms plate of size 12mm thick , ms frame work for roof trusses purlin rafter and ms plate etc all as directed make tata or sail or jsw ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie make tata or sail or jsw , iron welding rod confirming to is 814 to 2002 isi marked 3.15 mm thick 100 nos pkt , water proofing compound confirming to is 2645 to 2003 make pidilite or dr fixit or fevicol , quick setting compound make pidilite or fevicol or quick fix , cement based paint snowcem make berger or asian or nerolac , oil bound distemper washable quality of proprietary brand of make nerolac or berger or asian , birla white wall care putty water resistant white cement make nerolac or berger or asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film. as per technical specification and drawing attached , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make uniix or jindal mectec or equivalent brand , synthetic paint enamelled og colour confirming to is 5 to 2004 make berger or asian or nerolac , painting brush 4 feet isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 by 2 inch size isi marked 100 nos per pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make jindal or hindalco aluminium section weighing 0.55 kg per mtr , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame of size 1000mm x 1000mm including all fittings and as directed , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed make jindal or hindalco aluminium section weighing 0.55 kg per mtr , ms anchor bolt, suitable for rcc work 12mm dia 300mm long with 2 washer and a nut minimum wt of each bolt and nut is 450 gm complete all as directed , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make johnson or kajaria or orien 1st quality confroming to is 156 or 2006 , white cement confirming to is 8042 or 1989 make acc or birla white or ambuja , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type as per technical specification and drawing attached , cement opc 43 grade packed in hdpe bag each 50 kg wt make birla gold or ambuja or ultratech or acc or jk or dalmia or equivalent confirming to is 8112 to 2013 , coarse sand free from vegetation confirming to is 650 to 1991 reaffirmed 2008 , coarse aggregate 40mm graded confirming to is 383 to 2016 , stone boulder 9 feet to 12 feet confirming to is 1597 part i 1992 reaffirmed 2002 , pvc pipe 75mm dia 3 mtr long make prince or finolex or supreme or equivalent confirming to is 4985 to 2000 reaffirmed 2006 , construction material for drain and sump cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 to 1989 make birla gold or ambuja or ultratech or acc or jk or dalmia or equivalent , coarse sand free from vegetation , coarse aggregate 40mm graded , hardcore 63 to 90 mm graded , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe foot valve and connected accessories complete , distribution box 8 way spn 240 volts copper bus bar and neutral link earthing stud conforming to //bid details 2 / 94 is 13032 and is 8623 double door type make havells or legrand or l and t , mcb spn 240 volts 32 amps make havells or l and t or standard , mcb sp 6 to 32 amps make havells or l and t standard , pvc tape 19mm wide 5 m long make steelgrip or anchor or kinjal , cable pvc insulated electric cables heavy duty 1100

CTN :44892860

18 Jun, 2026 NA

Delhi - Delhi

Tender For procurement of spares for an-32 aircraft - shocks absorber, check bolt, bolt, block, clamp, bolt, end, surge stopper, damper (v), pipe line in left engine nacelle, bolt (0101 through 0605), safety harness, bracket, jet, end piece with hose, bracket, lock, capacitor, retainer, attachment of ics acess, lock, lh, lock, rod, edging, angle, lock, rh, relay, bolt, cover, knob for pot (ms27473t16f35p), framing, bracket (up to 0610), holdr (lh) (through 0710), pipe, elbow, cable (to no. 0510 length 6330 mm), casing, lock casing (lh), bracket, relay time, pipeline, installation of nav foot ptt switch betn f 5 and 6, left hand side, runner, through connection, framing, selector switch, pipeline, elbow, pipe, leading edge, bellcrank, rope, threaded t-piece, selector switch, rivet, rear plate, an32 flight acc. a kit als, matting connector, support (rh), support (lh), link, axle, selector switch, cover plate, panel, cover plate lh, panel, pipe, panel, bracket, power supply card, panel

CTN :44882287

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.

Central Government/Public Sector

CTN :43547938

16 Apr, 2026 6.14 Crore

Sonbhadra - Uttar Pradesh

Tender For bid to ras bid to ras bid to ras tender for supply of drag chain, pin, opposite plane link, dump block, pin, opposite plane link, pin, drag clevis, pin, round, plate, wedge, dump socket, pin, pin, collar, half, pin, round, square, clevis, w/bushings, pin, bucket assy., bushing split steel, bushing split steel, pin, bushing eccentric steel, bushing eccentric, clevis, drag hitch, welded, link assembly, dump link, welded, wedge, 1.375 rope, trunnion link assembly, bracket, arch, wedge socket

State Government

CTN :44799716

23 Apr, 2026 NA

Thiruvananthapuram - Kerala

Tender For supply of modular lan rate contract - modular lan rate contract, cat6 utp indoor cable (4 pair, 23awg solid bare copper cable lszh, printed meter marking), cat6 utp outdoor cable (4 pair, 23awg solid bare copper cable lszh, heavy duty uv resistant sheath, printed meter marking, certified for outdoor installations), cat6 i/o with dust cover, surface mount box with isi mark, face plate 1 port, face plate 2 port, cat6 24 port jack panel 1u unloaded, cat6 patch cord lszh 4 pair 24 awg standard copper 1m, cat6 patch cord lszh 4 pair 24 awg standard copper 3m, rj-45 utp connector, 25mm casing capping pvc channel isi, 38mm casing capping pvc channel isi, pvc conduit 1 isi, flexible pipe 1 isi, 50mm x 50mm pvc trunk isi, 9u rack, 2 fans, 1 cable manager, 1 power strip, 12u rack, 2 fans, 1 cable manager, 1 power strip, ethernet switch with 24 x 10/100/1000base-t poe ports, 4 x 10/100/1000base-t rj45/sfp combo ports, 193 w poe budget, 2mp network ir bullet camera with 1/2.8" 2mp ps cmos image sensor; 2mp (1920 1080)@1-25/30fps; instastream, h.265, h.264, h.264h, h.264b, mjpeg;3.6mm fixed lens; dwdr, day/night (icr), 3d nr, roi, awb, agc, blc, hlc, digital watermarking; ir range of 30 mtr., poe, ip67, wall plate access point with uplink: 1 10/100/1000 mbps ethernet port; downlink: 1 10/100/1000 mbps ethernet port; power supply: 802.3af/802.3at poe; antenna: 2.4 ghz: 2 4 dbi, 5 ghz: 2 3.6 dbi; mounting: wall plate mounting; bandwidth: 5 ghz: up to 867 mbps, 2.4 ghz: up to 300 mbps; transmit power control (adjust transmit power on dbm); wireless security: 802.1x support, 64/128/152-bit wep / wpa / wpa2-enterprise, wpa-psk / wpa2-psk; management: http/https, 3m lc-lc 9/125um sm duplex patch cords, casing and capping charges, conduit laying charges, utp cable laying charges, smb and faceplate fixing charges, io termination charges, rj-45 utp termination charges, patch panel installation charges, rack installation charges, link testing and labelling charges, ip camera fixing charges, access point fixing charges, ethernet switch installation charges

corporations/Associations/Others

CTN :41915956

17 Apr, 2026 NA

Cuddalore - Tamil Nadu

Tender For bid to ras supply of item no. 1: sm491050091: track plate with track link (450 mm pitch) fully welded and pins in assemble , item no. 2: sm495550086: track plate with track link (650 mm pitch) fully welded and pins in assemble

Central Government/Public Sector

CTN :44892543

23 Apr, 2026 NA

Multi City - Haryana

Tender For corrigendum : auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- lying at bin no. a-19 in scrap yard judw. remarks- [1]loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery

Central Government/Public Sector

CTN :44882299

21 Apr, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - ubl/gsd/a-09/c&w/26/a [pl no. 98987343] condemned and un-serviceable c&w scrap consisting of acetyl guide ring, compensating ring, safety strap, circlip, steel packing piece, locking plate, bracket for anchor link, brake lever hanger bracket, stopper assembly, suspension strap, safety strap, anchor link assembly, arms, silent block for anchor link, draft key, safety wire rope, lever hanger, break beam, dash pots, sludge blocks, bolts, nuts, dv, washers, pins and other c& w similar items with rusted condition. available under the custody of dms c&r ward gsd/ubl. note: purchase to physically inspect the lot before bidding. location:road no 01 a block/gsd/ubl bin no a-09.remarks-. delivery should start from one end. no pick and choose allowed

Central Government/Public Sector

CTN :44882301

21 Apr, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - ubl/gsd/a-11/c&w/26/a [pl no. 98987343] condemned and un-serviceable c&w scrap consisting of acetyl guide ring, compensating ring, safety strap, circlip, steel packing piece, locking plate, bracket for anchor link, brake lever hanger bracket, stopper assembly, suspension strap, safety strap, anchor link assembly, arms, silent block for anchor link, draft key, safety wire rope, lever hanger, break beam, dash pots, sludge blocks, bolts, nuts, dv, washers, pins and other c& w similar items with rusted condition. available under the custody of dms c&r ward gsd/ubl. note: purchase to physically inspect the lot before bidding. location: road no 01 a-block/gsd/ubl bin no a-11. remarks-. delivery should start from one end. no pick and choose allowed.

Locating Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector