Latest locator board Tenders | Government locator board Tenders

State Government

CTN :43061677

12 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

CTN :43048013

13 Dec, 2025 NA

Salem - Tamil Nadu

Tender For supply of sensors and actuators lab equipments - temperature measurement trainer kit 3 transducers-temperature measurement using iron/constantan thermocouple with cold compensation, using rtd and using thermistor- amplifier, constant current source- 31/2 digit display to view the temperature- built in power supplies & - legend printed in the pcb- necessary test points & - wooden closed cabinet- detailed instruction manual, behaviour of inductive and capacitive proximity sensors-inductive and capacitive proximity sensor mounted on board- proximity sensors pins terminated in terminals & - dc 24v build power supply & - buzzer and relay pins terminated in terminals & wooden closed cabinet & detailed instruction manual, displacement measurement using lvdt- lvdt range 10 mm & - screw gauge to move the core in lvdt- ac signal source, phase sensitive detector and instrumentation amplifiers & - 31/2 digit display to view displacement- test points to measure the signals & - built in power supplies- legend printed in the pcb & - wooden closed cabinet- detailed instruction manual, ldr vi characteristic and measure speed of the dc motor using optical sensor- 24v dc motor & - variable speed circuit & - slotted plate fitted in the shaft of the motor & - opto interrupter to sense the slot to use the speed of dc motor & measured the pulse & - frequency to voltage converter circuit & - digital display to display the speed- built in power supply and wooden cabinet, performance of ultrasonic sensor and moisture sensor- arduino uno board & - ultrasonic sensor & - moisture sensor- 16*2 lcd display & - the moisture and distance can be visualized in lcd display & - serial communication in pc- supporting program and usb cable and necessary patch cardwill be provided & - built in power supplies & - necessary test points & - wooden closed cabinet & - detailed instruction manual, behaviour of transistor as a switch- on/off control on dc motor using & - push button & - single pole single through (spdt) & - single pole double through (dpdt) & - limit switch & - transistor as a switch & - relay switch- built in power supplies & - necessary test points & - wooden closed cabinet & - detailed instruction manual, forward and reverse control of three phase ac motor- 2 nos. of 3 phase 16a main contactors & - 3 phase input, fuses- stop, start fwd, start rev, push switches & - control inputs and outputs wiring & - indication of forward and reverse operation- proper termination for 3 hp cage motor & - wooden closed cabinet, pneumatic circuit for double acting cylinder trainer kit consisting of- 2 feet x 2 feet hylam panel & - supporting stand & - frl with base 1 no. & - hand slide valve with base 1 no.- double acting cylinder 25mmx100mm with base 1 no.- 5/2 solenoid valve valve 24v with base 1 no. & - flow control valves with base 2 nos. & - necessary plugs and cable- switch module 1no & - 24v, 2a power supply- without air compressor, servo motor control with an arduino shield- arduino uno board & - mg90s servo motor & - 16*2 lcd display- sweeps the shaft of servo motor back and forth across 180 degree & - potentiometer value and shaft position visualized in lcd display & - serial communication in pc- supporting program and usb cable and necessary patch card will be & provided & - built in power supplies, necessary test points- wooden closed cabinet, detailed instruction manual

State Government

CTN :43051463

26 Dec, 2025 NA

Kheda - Gujarat

Tender For supply of various electrical consumable items for emd 3 & emd-5 at wtps, gsecl. - jyoti make voltage operated auxiliary relay type re-300, voltage: 220 v dc with 4 c/o contacts without plug in base with optional led indicator, plug in type relay make paramount coil voltage 110 v ac 50 hz., plug in type relay, "paramount" make, coil voltage - 24 v dc, with 2 c/o contacts, type-p3-2-pz-m-24 v dc with led & relay base., plug in type relay, "paramount" make, coil voltage- 240 v dc, with 3 c/o contacts, type-p3-3-fpzi -240 v dc with led & relay base., oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, crc-226 contact cleaner in 415 ml/300 gram spray bottle., red insulating varnish-class f epoxy insulation & protection coating., becktol gray varnish in 1 ltr tin dr.back make, thinier 221, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., puff seal have polyurethene based foam sealing compound, silica gel blue 4 to 6 mm, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, mcb 4 pole, 32 amp, 440 volts, breaking capacity 10 ka, mcbs(3 pole+nutral) miniature circuit breker current rating 63amp., mcb 1 pole 25 amp,l 43125 ro, plug socket 6 amp 230v,5 hole, 3 pin plug top 6amp. 4657, single way switch 230 v, 6 amp. confirming is 3854., pvc adhesive insulation tape roll, ceiling fan capacitor, change over switch 63a x 415v x 4 pole, ictp switch 415 volts,100 amp. t.p. heavy duty., lighting panel with 18 outgoing c.k.t., supplied with double door,insulated busbar,insulated neutral bars,earth bar,cable ties,circuit identification lables, industrial padestal fan, wall mounting fan smart looks flexible tilting neck with toggle switch for oscillation control metal blades 230v 50hz. power saver., 4 pole, 100 amp, 415 volt, ac 23 a, 4p l&t make manual changeover switch ,disconnector, size fr1, catalogue no : co11000oooo, (conforms to iec 60947-3, is/iec 60947-3 ),type : open execution, push button station surface mounting type 3sb08 02-8ac, start-stop positions, siemens make, start push button green make:esbee ,230v,6a with n0 contact element, stop push button red make:esbee ,230v,6a with nc contact element, led type indication lamp, 22.5 dia, 240 v ac, red colour with lvgp, led indication lamp 22.5mm dia colour:-red voltage:-110vac make:-l&t cat no.:-eplr110a, 4 switch and 1 socket pvc switch board, 4 switch and 4 socket pvc switch board, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 2 switch pvc switch board, 3 core , 6 mm sq. flexible pvc insulated copper cable, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 50 mm dia. after shrink : 16 mm for 1.1 kv lt cable, pvc flat copper cable 3 corex35 sqmm for submercible pump, 1100 v grade, multi-stranded, unarmored flat copper cable, pvc insulated, for submersible pump, as per is 694, 1990 size :3 c x 70 mm2

CTN :42106591

08 Dec, 2025 NA

Rohtas - Bihar

Tender For bid to ras supply of dsp lab electrical machine and power system dsp trainer kit with jtag to usb programming cable the kit feature the tms320c6745 dsp or equivalent series with fixed- and floatingpoint processor a 375 mhz device delivering up to 3648 million instructions per second (mlps) and 2736 mflops on board clock generator this kita white noise generator of amplitude 0-5vpp with signal and noise adder on board on board 4*4 led matrix,20+2 character lcd display 7 segment displays available on the kit. jtag supported via usb programmable cable toprovided. tlv320alc23b programmable stereo codec and expansion for port connector for plug-in modules be providedfacility for 8 dip switches for inputs and 8 led indication for output compatible with code composer studio to write programs and implement on the dsp chip. experimental manual with at least 30 experiments provided and the source codes for these experiments provided all with the trainer. to study distance relay "numerical" type with software through pc interfacing experiments 1. study of distance protection relay physically. 2. study the connection the relay from pc. 3. study the checking of setting of zone-1 in distance protection relay by changing impedance. 4. study the checking of setting of zone-2 in distance protection relay by changing impedance. 5. study the checking of setting of zone-3 in distance protection relay by changing impedance. 6. study the checking of setting of zone-4 in distance protection relay by changing impedance. instruments required 1. numerical type distance protection relay for study 2. three phase transformer 400/110 v. 3. three phase contactor 4. digital ammeter - 1 no. 5. digital voltmeter - 1 no. 6. different value of impedances 7. current transformer 8. 50v ac ) /bid number : gem/2025/b/6685696 * /dated: 28-09-2025 & & / bid document 1 / 8

CTN :41576307

30 Dec, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for mig-29 upg aircraft - ball bearing, bearing, relay, bearing, switched filter unit 2-1, kup printed circuit board, mi 10-1076 display(indication module), isda-2, laser transmitter, 30pk-29k source point, circuit breaker, ik tv module, source point, power unit 2-4, if amplifier 1-2, high-frequency amplifier unit (units 1-1), mv-5, board bpoi-27

CTN :42796489

04 Dec, 2025 NA

Ganganagar - Rajasthan

Tender For corrigendum : supply of ac cable , body side marker light hmv and battery clip 24 v , revolving light 24 v and gear lever knob , gear lever knob and waiper screen w tank , ac jali gypsy and h honda pipe , h honda clutch wire and indication , switch and indication back side , plug cap re and clock re , glass hmv and dash board cover m4 , mud flap m4 and door beading , radiator fan , radiator fan guard , door gatta , gypsy front grill , coolant tank and door handle lh outer , door handle rh outer , cabin beading lhandrh , spidle bearing and acc cable rotary

CTN :42937342

16 Dec, 2025 NA

Udhampur - Jammu And Kashmir

Tender For rate contract for supply of electric material ht lt tand p equipments hardware items etc for std udhampur - xlpe power cable (make havells or any other reputed make conforming to relevant is specifications) :, a)33 kv 3 core xlpe armoured cable 300 sqmm, b)33 kv 3 core xlpe armoured cable 240 sqmm, b)33 kv 3 core xlpe armoured cable 185 sqmm, 33 kv ab cable 185 sq mm (3 x 185 + 1 x 120), c) 11 kv single-core xlpe armoured cable 630 mm2, d) 11 kv 3-core xlpe armoured cable 400 mm2, e) 11 kv 3-core xlpe armoured cable 300 mm2, f) 11 kv 3-core xlpe armoured cable 240 mm2, g) 11 kv 3-core xlpe armoured cable 185 mm2, twin core al lt cable 16 mm2 pvc cable (al), lt xlpe al cable 3.5 core armoured x95 sqmm (3 x 95 + 1 x 70 + 1 x 16), lt xlpe al cable 4 core cu armoured 16mm , 33 kv cable termination kits outdoor (make havells or any other reputed make conforming to relevant is specifications) :, a) cable termination kits 33 kv heat shrinkable outdoor type 300 mm2 (single core), b) cable termination kits 33 kv heat shrinkable outdoor type 240 sqmm (single core), c) cable termination kits 33 kv heat shrinkable outdoor type 185 sqmm (single core), d)33 kv cable straight through joints heat shrinkable 300 sqmm -3 core, e) 33 kv cable straight through joints heat shrinkable 240 sqmm -3 core, f) 33 kv cable straight through joints heat shrinkable 185 sqmm -3 core, 11 kv cable termination kits outdoor/indoor (make havells or any other reputed make conforming to relevant is specifications), a) cable kits 11 kv heat shrinkable indoor 630 mm2 (single core), b) cable kits 11 kv heat shrinkable indoor 400 mm2- 3 core, c) cable kits 11 kv heat shrinkable indoor 300 mm2 - 3 core, d) cable kits 11 kv heat shrinkable indoor 240 mm- 3 core, e) cable kits 11 kv heat shrinkable indoor 185mm2 - 3 core, f) cable kits 11 kv heat shrinkable indoor 120 mm2 - 3 core, g) cable kits 11 kv heat shrinkable outdoor 630 mm2 - 1 core, i)cable kits 11 kv heat shrinkable outdoor 400 mm2 - 3 core, j) cable kits 11 kv heat shrinkable outdoor 240 mm2- 3 core, k) cable kits 11 kv heat shrinkable outdoor 185 mm2- 3 core, l) cable kits 11 kv heat shrinkable outdoor 120 mm2- 3 core, 11 kv straight through joints, a)11 kv cable straight through joints heat shrinkable 630 sqmm - 3 core, b)11 kv cable straight through joints heat shrinkable 400 sqmm - 3 core, c)11 kv cable straight through joints heat shrinkable 240 sqmm - 3 core, d)11 kv cable straight through joints heat shrinkable 185 sqmm - 3 core, e)11 kv cable straight through joints heat shrinkable 120 sqmm - 3 core, control cable (copper), a) 2.5 mm2 cu 2-core, b) 2.5 mm2 cu 4-core, c) 2.5 mm2 cu 6-core, d) 2.5 mm2 cu 8-core, e) 2.5 mm2 cu 10-core, f) 2.5 mm2 cu 12-core, g) 2.5 mm2 cu 16-core, battery chargers & batery bank & ac / dc distribution board, a) 36 volts battery bank 100 ah, 2 v, 18 nos cells complete with all accessories .make :- exide, amaron,tata or equivalent., b) 30 amp manually operated battery charger.- float cum boost with test certificate (cpri, nabl), c) maintenance free 32 v lead acid battery (vrla) bank comprising of 16 nos of 2 volt cells of 100 ah capacity make hbl, exide, amaraja etc, d) 32 v battery charger automatic (float & boost) compatible for vrla batteries, distribution panel (30 v, dc) made of crca thickness not less than 2mm. powder coated, degree of protection ip43 for 2 no battery incoming supply with 2 no 63 amps dp mcbs for incoming supply double busbar of adequate size, 12 no dp dc mcb (0-32a) including indication lamps and cables and other accessories, distribution panel (415 v, ac) made of crca thickness not less than 2mm. powder coated, degree of protection ip43. 200 amps switch fuse disconnector for incoming supply and 5 no tpn mcbs (16-125 amps ) and 5 no dp mcbs (0-32a), rectangular busbar suitable for 200 amps continuous supply including indication lamps and cables and other accessories, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or

CTN :42931333

06 Dec, 2025 2.00 Lacs

Kupwara - Jammu And Kashmir

Tender For supply of green acrylic fence - table glass 48ft x 28ft with 8mm with molding , dsc token , fiber glass sheet 32 sqft , heavy duty single lock double header locker , agra net , audio interface with mic pre amplifier for outdoor recording , shakti vijay flex board , indication and notice bd dimension , green acrylic fence sheet alongwith supporting poles and wooden bullies and instl charges

State Government

CTN :42920788

16 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution of various signalling equipments as per boq attached inspection rites consignee - fabrication and supply of point rodding (ground connection) set with insulation complete set for electric point machine 220 mm stroke clamp type for thick web switches as per rdso drg no rds0/s/3454 alt -a ver-1 or latest. (inspection agency:- rites), supply and fixing of gi bend pipe 50 mm dia., bclass, for cable entry into point machine with all accessories. note: th is item to be operated independently for those points where point machines are functional, but gi bend pipe is not provided. for all other new installation of point machines, item 06002 of the sor includes the provision of gi bend pipe. (inspection agency:- consignee), supply of point machine ground connection insulation complete set including for p bracket insulation for point machine irs type 220 mm.(inspection agency:- rites), supply of stretcher bar insulation complete set for point machine irs type 220 mm stroke clamp type.(inspection agency: - consignee)., supply of track lead junction boxes fiber glass as per drg.no. cwm - 00597 of f.r.p material to irs.s.23 specification along with fixtures i.e., on ms angle 50x50x5mm, 0.9 meters long two numbers of g.i. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm pbt terminal). (inspection agency:- consignee), supply of aluminium ladders of height 5 feet for maintainer at relay room and ips room of model no: 8226 of youngman, plantex or similar. (inspection agency: - consignee)., supply of lps 3.00 mm thick rolled copper strip of reputed branded make. (inspection agency: - consignee), supply of insulation resistance tester. make fluke 1507 or similar. (inspection agency:- consignee), supply, fabrication and fixing of the calling on board/bslb board as per rdso drg. no. sa 2373 (adv)/stop/warning board as per drg. no. sa-2380 (adv), or as applicable, on concrete foundation and painting with retro reflective paint. all work to be carried out as per railway site engineer instructions.(inspection agency:- consignee), supply, fabrication and fixing of retro reflective signal number plates as per ncr drg. no. typ/14/0014 dtd 28.11.2014 issued vide ncr letter no. s&t/ ncr/drg/typ dated 28.11.2014, on signal post with contractors own material like clamp, u bolts, nuts etc.(inspection agency:- consignee), supply of digital cable fault locator for metallic s&t cables of reputed make as per tec spn no. gr/tie-05/03, july 2006 & tec 73060:2006 like khushicomms model venus 120 orsimilar branded make. consignee shall approve the supply only after successful demonstration at site(inspection agency:- rites), supply and testing of cable route tracer and marker locator model and make 3m dynatel model locator 2273m or reputed branded make.(inspection agency:- rites), supply, installation and commissioning of central gateway. note: single centre gateway shall cater maximum up to 32 data transmitter node (modbus).(as per annexure a) (inspection agency:- rites), supply, installation, testing and commissioning of data transmitter node in location box. modbus type note: maximum range 400 meter. (as per annexure b) (inspection agency: - rites), supply, installation , testing and commissioning of data transmiter modbus cum repeater for augmenting range of ourdoor data transmiter node (modbus), where distance of location box is more than 400 meter with respect to central gateway.(as per annexure c) (inspection agency:- consignee), apparatus case led indication status display unit cum allarm system for yard.single display system shall cater to maximum 45 no of location boxes.(as per annexure d)(inspection agency:- consignee), fabrication, supply and fixing of p, c, a, g, ibs etc. marker disk painted and lettered with enamelled paint of approved colours, on signals, conforming to rdso drg. no.sa - 23456, as per standard practice and technical specifications.(inspection agency:- consig

Central Government And Public Sector

CTN :42924874

17 Dec, 2025 NA

Bhandara - Maharashtra

Tender For comprehensive annual maintenance contract of coach guidance display boards systems, train indication boards &train at a glance display board of make - patronics at kamptee, bhandara,gondia & rajnandgaon stations in nagpur division of secr.(for three years).

Locator Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government And Public Sector